Microscale Relationships Between Fault Rock Fabric and Structural Style in Megathrusts – Observations from Tohoku-Oki Via J-Fast.

Virginia Toy, University of Otago, Dunedin, New Zealand, Ake Fagereng, Cardiff University, Department of Earth and Environmental Sciences, Cardiff, United Kingdom, James D Kirkpatrick, Colorado State University, Fort Collins, CO, United States, Francesca Remitti, University of Modena and Reggio Emilia, Department of Chemical and Geological Sciences, Modena, Italy, Christie D Rowe, University of Nevada Reno, Nevada Seismological Laboratory, Reno, United States, Kohtaro Ujiie, University of Tsukuba, Tsukuba, Japan, Monica Wolfson-Schwehr, University of New Hampshire Main Campus, Durham, NH, United States and IODP Expedition 343 and 343T Scientists
Abstract:
Recovered plate boundary thrust material from the site of the 2011 Tohoku-Oki earthquake rupture contains both distributed and localized fabrics. We1 infer these reflect two end members of behavior, namely steady state creep of weak, velocity/strain-hardening materials versus episodic, seismic failure of strong, velocity/strain-weakening materials. Core and downhole observations and mechanical tests demonstrate the fault rock is primarily smectite and has very low frictional strength (μk~0.08) 2,3,4,5.

Additional observations of the recovered core indicate microscale fabrics affect mechanical properties. The fault zone fabric is defined mostly by anastomosing dark surfaces surrounding phacoids. Phacoid size and intensity of dark surfaces vary, probably reflecting differences in total strain. Phacoids contain foliations at angles to their long axes and bounding surfaces. Remnant bedding can be recognized in places, based on variation in phyllosilicate colour or clastic:phyllosilicate ratio (although other colour variations result from alteration1). Anastomosing shear surfaces may coincide with bedding but also commonly truncate it, indicating little primary lithological/rheological control on fabric formation. However, in late mm-thickness, through going, more intensely sheared zones, lithologic contrast more strongly defines phacoids while dark seams may be absent.

A transition from distributed shear in phyllosilicates to localized shear on dark surfaces requires local change in stress or strain rate. If the orientation of clay fabrics change due to folding (‘turbulent’ flow), then weak basal planes of phyllosilicates rotated into unfavourable orientations may act as ‘stress risers’ promoting localization around phacoids containing poorly oriented fabrics. This mechanism is indicated by the presence of the most folded layering in plate boundary core adjacent to the most distinct through-going surfaces1,2. Alternatively, locally well-oriented fabrics may preferentially shear, leaving surrounding rock as lower strain phacoids.

Refs: 1: Kirkpatrick, et al. submitted. Tectonics. 2: Chester et al., 2013. Science 342, 1208-1212. 3: Fulton et al., 2013. Science 342, 1214-1217. 4: Lin et al. 2013 Science 339 (6120), 687-690. 5: Ujiie et al., 2013. Science 342, 1211-1214.

Back to: Illuminating the Factors That Determine Subduction Megathrust Fault Slip Style IV Posters