Conceptual Poroelastic Models for Fault Reactivation in Response to Concurrent Injection and Production in Stacked Reservoirs

Abstract:

Concurrent production and injection in stacked reservoirs as commonly conducted in unconventional resource exploitation potentially influences reactivation of nearby faults. Using three-dimensional, fully-coupled poroelastic finite-element simulations, we assessed the potential for reactivation of a barrier normal fault in a normal-faulting stress regime for twelve generic injection-production scenarios that differ in the depth of injection and production, and in the position and distance relative to the dipping fault plane. The simulations display significant variation in the Coulomb failure stress (CFS) with depth along the fault plane for these scenarios, reflecting differences in pore pressure distribution and associated poroelastic changes in normal and shear stress across the fault. Based on the CFS trends with depth we find that concurrent production and injection reduces or increases the fault reactivation potential in the injection reservoir depending on the lateral position and the distance of the wellbores relative to the fault plane. The fault is most prone to reactivation with stacked wellbores and injection into the upper reservoir within the hanging wall or the lower reservoir within the footwall. With decreasing wellbore-to-fault distance, induced poroelastic shear stresses and thus CFS increase, making injection only into the lower reservoir, without concurrent production, the most stable configuration at close distance. These results were intended to provide general guidance for further detailed site-specific geomechanical evaluations needed for induced seismic hazard assessment.