A087-0005
Momentum Transport in Heterogeneous Forest Canopies

Thursday, 10 December 2020
Poster
Hawwa Kadum1, Ryan Scott1, Sarah Smith2, Giulia Salmaso3, Chad W Higgins4, Raúl Bayoán Cal5 and Marc Calaf3, (1)Portland State University, Mechanical Engineering, Portland, OR, United States, (2)Portland State University, Portland, United States, (3)University of Utah, Salt Lake City, UT, United States, (4)College of Agricultural Sciences, Oregon State University, Biological and Ecological Engineering, Corvallis, OR, United States, (5)Portland State University, Portland, OR, United States
Abstract:
The effect of spatial heterogeneity on momentum transport in forest canopies is investigated in a series of wind tunnel experiments. Forest models of 1:200 scale were manufactured from 10 PPI reticulated foam with porosity equivalent to a LAI of 5.3. The model forest canopy consists of identical, uniformly distributed trees with spatial heterogeneity introduced via alternating patches and gaps of various sizes. The various heterogeneity arrangements are then tested against surface and volume integrated terms of the momentum equation obtained using control volume analysis. Two canopy layers are considered: upper canopy above the canopy height and lower canopy below the canopy height. The lower canopy is dominated by local flow features and its response to heterogeneity is lower than the upper canopy. The upper canopy shows a significant increase in momentum advection and residual terms with increased heterogeneity. The most heterogeneous case shows an advection value that is 14 times the homogeneous case. The stress gradient term also increases with heterogeneity although the difference between upper and lower canopies is less pronounced. The stress gradient term is more influenced by the gap size.