Numerical studies on combined CO2 injection-brine extraction process in a low-medium geothermal reservoir
Numerical studies on combined CO2 injection-brine extraction process in a low-medium geothermal reservoir
Previously Published Material: These findings are now under review by Journal of Environmental Earth Science
Abstract ID#: 33676
English Abstract:
CO2 sequestration in deep saline formations has been proven to be an effective method for reducing greenhouse gas emissions into the atmosphere. However, pure sequestration of CO2 will add to the costs incurred by both industries and governments. A win-win method of CO2 injection and hot brine (water) extraction can become attractive to the investors, as it will not only increase the storage capacity of the injected CO2, but also offset the costs by selling and using the produced hot water for industrial, agricultural or household purposes. For instance, water from very hot geothermal reservoirs (T≥150oC) can be used for electricity generation in power plants and water from low-medium temperature reservoirs, the most predominant in natural systems, are more popular for direct use e.g. in heating systems, household hot water, aquaculture etc. In this paper, low-medium geothermal reservoirs widely distributed in China, especially those in the Ordos Basin, were selected for the numerical case studies using TOUGH2MP with the ECO2N module for the simulations. Generally, simulation parameters were taken from the Ordos Basin, where the first full-integration CO2 sequestration project in China had been operating since 2010. The simulations lasted 35 years, based on the lifespan of a normal geothermal project. Shallow reinjection systems were also studied to investigate the influence of thermal breakthrough, pressure perturbation, etc. Results show that injection of cold CO2 causes sharp decrease in temperature in the reservoir region near the injection well, which is enlarged with continuous injection. The region near the production well is dominated by different fluid phases during the CO2 driven process, including a single water phase, a two phase fluid (water and CO2) and a phase of almost pure CO2. Results also show that the CO2 breakthrough lags far behind the pressure response in the geothermal production system. Before breakthrough, the injected CO2pressurizes the reservoir, improving the overall performance of the geothermal reservoir.
Keywords: CO2 injection· brine extraction· heat breakthrough· geothermal reservoir
Back to: Geothermal Energy
