Preliminary Program subject to change
03008 Characterization of Engineered Particles and Nano-Structured Particles
OverviewThe physical and chemical characterization of engineered particles ranging from the nanometer to the micrometer scale plays an important role in formulation, processing and quality assurance. This session will focus on recent developments in characterization techniques and methodologies. Emphasis will be placed on nanostructured engineered particle systems with several examples of the link between novel characterization techniques and novel engineered structures and properties.
Primary SponsorParticle Technology Forum (03)

Chair

Gregory Beaucage
Associate Professor
Department of Chemical and Materials Engineering
University of Cincinnati
Cincinnati, OH 45221-0012
Phone Number: 513 556 3063
Email: beaucag@uc.edu

CoChair

Mark Bumiller
Vice President of Business Development
Malvern Instruments
10 Southville Road
Southboro, MA 01772
Phone Number: 508-480-0200 ext. 222
Fax Number: 508-460-9692
Email: Mark.Bumiller@malvernusa.com
Aerosol Synthesis of Low Density High Surface Area Aerosol Gels
C. M. Sorensen, R. Dhaubhadel and A. Chakrabarti, Physics, Kansas State Univ., Manhattan, KS 66502
Experimental and Computer Simulation Studies of the Mechanical Behavior of Nanoparticle Chain Aggregates
Adamos Dalis, Weizhi Rong and Sheldon K. Friedlander, Chemical Engineering Department, University of California, Los Angeles, 5531-K, Boelter Hall, 405, Hilgard Avenue, Los Angeles, CA 90095
Phase Composition of Fumed Alumina Nanoparticles
George Fotou1, Lawrence Murphy2 and Robert Picthall2, (1)Cabot Superior Micropowders, Cabot Corporation, 5401 Venice Avenue, NE, Albuquerque, NM 5401, (2)Billerica Technical and Business Center, Cabot Corporation, 157 Concord Road, P.O. Box 7001, Billerica, MA 01821
Characterization of Nanoparticle Composition and Reactivity by Single Particle Mass Spectrometry
K. Park, University of Maryland, College Park, MD 20742, Zhou Lei, University of Maryland, College Park, 20742 and Michael Zachariah, University of Maryland and NIST, 2125 Glenn L Martin Hall, College Park, MD 20742
Real Time Measurement of Sintering Rates by Tandem Mobility Dma and an Electrospray System
Kuk Cho, Chemical engineering, Washington University in St. Louis, St. Louis, MO 63130 and Pratim Biswas, Chemical Engineering, Washington University in St. Louis, St. Louis, MO 63130
Dynamics of Particle Formation and Growth in Spray Flame Pyrolysis Using in Situ X-Ray Scattering
Gregory Beaucage1, Rainer Jossen2, Sotiris E. Pratsinis2 and Theyencheri Narayanan3, (1)Department of Chemical and Materials Engineering, University of Cincinnati, Cincinnati, OH 45221-0012, (2)Swiss Federal Institute of Technology (ETH Zurich), Department of Mechanical & Process Engineering, Sonneggstrasse 3, ML F26, Zurich, CH-8092, Switzerland, (3)ID02, European Synchrotron Research Facility, Grenoble, F-38043, France
Size Distributions of Non-Spherical Particles from Chord Length Measurements: How to Account for Orientation Bias Due to Flow
Nandkishor K. Nere, Purdue University, 480 Stadium Mall Dr., West Lafayette, IN 47907, Doraiswami Ramkrishna, School of Chemical Engineering, Purdue University, 480 Stadium Mall Dr., West Lafayette, IN 47907 and Bruce Parker, Global Manufacturing Services - Process Engineering Center, Eli Lilly and Company, Indianapolis, IN

Particle Technology Forum