Preliminary Program subject to change
12007 Debottlenecking of Manufacturing Processes
OverviewDebottlenecking chemical processes is necessary to sustain cost effective production and manage capacity in an ever changing marketplace. This session seeks systematic methodologies/technologies that facilitate the analysis of system interconnections and interaction of processing units, the identification of inefficiencies, and the reduction of the bottlenecks in plant design and operation. Applications of the methodology and technology include, but not limited to, the critical processes or equipment (e.g., reactors and energy-based or mass-separating-agent-based separation units), as well as utility systems (e.g., furnaces and boilers).
Primary SponsorProcess Development Division (12)

Chair

Helen H. Lou
Associate Professor
Department of Chemical Engineering
Lamar University
P.O.Box 10053
Beaumont, TX 77710
Phone Number: 409-880-8207
Fax Number: 409-880-2197
Email: louhh@hal.lamar.edu

CoChair

Randy Esposito
Development Associate
Praxair
175 East Park Drive
PO Box 44
Tonawanda, NY 14150
Phone Number: (716) 879-2406
Fax Number: (716) 879-7091
Email: randy_esposito@praxair.com
Avoiding Process over-Control and Process Plant Debottlenecking
Jonathan H. Worstell, HODer, Shell Chemical Company, 3333 Highway 6 South, Houston, TX 77082
Estimating the Capacity of Simple Batch Processes
James L. Manganaro, New Jersey Center for Microchemical Systems, Stevens Institute of Technology, 44 Dodds Lane, Hoboken, NJ 07030
Non-Isothermal Reactor Network Synthesis through Ideas
Wen Zhou, Chemical Engineering, University of California, Los Angeles, Los Angeles, CA 90095 and Vasilios I. Manousiouthakis, Chemical Engineering Department, UCLA,, 5531 Boelter Hall, Los Angeles, CA 90095-1592
Optimized Heat and Power Exchange Network in Ethanol-Water Pressure Swing Distillation
Xinqun Huang, Chemical and Biologica Engineering, RPI, 110, 8th street, Troy, NY 12180 and Lealon L. Martin, Rensselaer Polytechnic Institute, 110 8th Street, Troy, NY 12180-3590
Use of Computational Fluid Dynamics for Catalyst Deactivation at Commercial Plants
Sue Degaleesan, Janine A. Toner and Jonathan H. Worstell, Shell Global Solutions, 3333 Highway 6 South, Houston, TX 77082
Synergy Analysis of Collaborative Supply Chain Management in Energy Systems Using Multi-Period Milp
Metin Turkay1, Ahu Soylu1 and Kaoru Fujita2, (1)College of Engineering, Koc University, Rumelifeneri Yolu, Sariyer, Istanbul, 34450, Turkey, (2)Technology and Production Center, Mitsubishi Chemical Corporation, 3-10, Ushiodori, Kurashiki, 712-8054, Japan
Castable Coating Experiment in the Primary Reformer to Avoid Fouling in the Convection Section Coils
Sukardi Pawiradikrama, Operation, PT. Kaltim Parna Industry, Wisma KPI, Jl. Pupuk Raya Km. 2, Bontang, 75314, Indonesia and Hari Triwidodo, Production, PT. Kaltim Parna Industry, Wisma KPI, Jl . Pupuk Raya Km. 2, Bontang, 75314, Indonesia

Process Development Division