Preliminary Program subject to change
T1002 Fuel Cell Technology II: Fundamentals Processes
OverviewPresentations in this session will deal with fundamental issues relating to fuel cell development, catalysis and electrode materials, reaction rates, and transport phenomena in fuel cells.
Primary SponsorTopical 1 - Fuel Cells Technology (T1)

Chair

Ken S. Chen
Principal Member of Technical Staff
Engineering Sciences Center
Sandia National Laboratories
Org. 9114, MS 0834
Albuquerque, NM

Phone Number: 505-844-5783
Email: kschen@sandia.gov

CoChair

Scott A. Gold
Assistant Professor of Chemical Engineering
Lousiana Technical University
Institute for Micromanufacturing
PO Box 10137
Ruston, LA 71270
Phone Number: 318-257-5148
Fax Number: 318-257-5104
Email: sgold@LaTech.edu
Magnetic Resonance Imaging (Mri) Microscopy of Operating Direct Formic Acid Fuel Cell (Dfafc)
Su Ha1, Zachary Dunbar1 and Richard I. Masel2, (1)Chemical Engineering, University Of Illinois, 600 S Mathews, Urbana, IL 61801, (2)Chemical and Biomolecular Engineering, University of Illinois, 600 S. Mathews St., Urbana, IL 61801
Addressing Cathode Limitations in Laminar Flow Based Micro Fuel Cells
Ranga S. Jayashree1, Eric R. Choban1, Seong Kee Yoon1, Alex Primak2, Dilip Natarajan2, Larry J. Markoski2 and Paul J. A. Kenis3, (1)Chemical & Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Av. C3, Urbana, IL 61801, (2)INI Power Systems, 136 Quade Drive, Cary, NC 27513, (3)Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801
Formic Acid Electro-Oxidation by Pd: Particle Size Effects
Robert T. Larsen, University of Illinois, 600 S. Matthews Ave., Urbana, IL 61801, Weiping Zhou, Chemistry, University of Illinois, 600 S Matthews Ave, Urbana, IL 61801, Andrzej Wieckowski, Chemistry, UIUC, 600 S. Mathews Av. C3, Urbana, IL 61801 and Richard I. Masel, Chemical and Biomolecular Engineering, University of Illinois, 600 S. Mathews St., Urbana, IL 61801
Graphite-Filled Liquid Crystal Polymer Composites for Fuel Cell Bipolar Plates
Michael G. Miller, Jason M. Keith and Julia A. King, Chemical Engineering, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931-1295
Preliminary Design Equations for High Temperature Pbo/Pbi-Based Solid Polymer Electrolyte Reformate/Air Fuel Cells
Sarwan S. Sandhu, Department of Chemical and Materials Engineering, University of Dayton, 300 College Park, Dayton, OH 45469-0246 and Joseph P. Fellner, AFRL/PRPA, 1950 Fifth Street, Wright-Patterson Air Force Base, OH 45433-7251
Investigation of Oxygen-Surface Interactions over Doped Lanthanum Ferrites for Solid Oxide Fuel Cell Cathodes
John N. Kuhn and Umit S. Ozkan, Department of Chemical and Biomolecular Engineering, The Ohio State University, 140 West Nineteenth Avenue, Columbus, OH 43210
Catalyst Layer Network Formation in Polymer Electrolyte Membrane Fuel Cells
Christine Hronec and Yossef A. Elabd, Drexel University, Dept of Chemical and Biological Engineering, 3141 Chestnut St, Philadelphia, PA 19104
Cerium and Lanthanum Oxide-Based Sorbents for Regenerative Hot Reformate Gas Desulfurization
Zheng Wang, Mann Sakbodin and Maria Flytzani-Stephanopoulos, Department of Chemical and Biological Engineering, Tufts university, 4 colby street, Medford, MA 02155
A CFD Based Two-Fluid Model for a Dmfc
Il Moon, Department of Chemical Engineering, Yonsei University, 134 Shinchon-dong, Seodaemun-ku, Seoul, 120-749, South Korea, Valeri A. Danilov, Yonsei University, Shinchon-dong 134, Seoul, 120-749, Korea, Jong-Koo Lim, Yonsei University, Shinchon-Dong 134, Seoul, 120-749, Korea and Kyoung Hwan Choi, Materials & Devices Laboratory, Samsung Advanced Institute of Technology, Nongseo-ri, Giheung-eup, Yongin-si, San 14-1, Gyeonggi-do, Suwon, 440-600, South Korea
Nanoporous Silicon Electrode Structures for Micro-Fuel Cell Applications
Scott A. Gold, Lousiana Technical University, Institute for Micromanufacturing, PO Box 10137, Ruston, LA 71270

Topical 1 - Fuel Cells Technology