The Power Performance Curve for Engineering Analysis of Fuel Cells
Jay B. Benziger, I. G. Kevrekidis, M. B. Satterfield, W.H.J. Hogarth and J.P. Nehlsen, Princeton University, A215 Engineering Quadrangle, Princeton University, Princeton, NJ 08544 |
Comparison between Pemfc Water Management Model and in-Situ Water Transfer Measurements
Pierre Sauriol1, Gwang-Soo Kim2, H. Tony Bi1, Jürgen Stumper2 and Jean St-Pierre2, (1)Chemical and Biological Engineering, University of British Columbia, 2216 Main Mall, Vancouver, BC V6T 1Z4, Canada, (2)Ballard Power Systems, 9000 Glenlyon Parkway, Burnaby, BC V5J 5J9, Canada |
Pspice Simulation Via Ac Impedance for a PEM Stack at Operational Loads
Wenhua H. Zhu, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, 316C Haley Center, Auburn, AL 36849, Robert U. Payne, Department of Chemical Engineering, Auburn University, 230 Ross Hall, Auburn, AL 36849, Donald R. Cahela, Center for Microfibrous Materials Manufacturing, 230 Ross Hall, Auburn, AL 36849-5127, R. M. Nelms, Department of Electrical Engineering, Auburn University, 200 Broun Hall, Auburn, AL 36849 and Bruce J. Tatarchuk, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, 230 Ross Hall, Auburn University, Auburn, AL 36849 |
Measurement of the Performance of a 47 Cell PEM Stack with Impurities in the Anode Feed Stream
Robert U. Payne, Wenhua H. Zhu and Bruce J. Tatarchuk, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, 316C Haley Center, Auburn, AL 36849 |
A Neural Network-Based, Reduced Order Model for Repetitive and Time-Efficient Prediction of the Behavior of PEM Fuel Cells
Taehoon Oh, Myongji University, Dept. of Chemical Engineering, Yongin, Kyunggido 449-728, Korea, Dongil Peter Shin, Dept. of Chemical Engineering, Myongji University, Nam-Dong, Yongin, 449-728, South Korea and Raghunathan Rengaswamy, Chemical Engineering, Clarkson University, Box 5705, Clarkson University, Potsdam, NY 13699-5705 |
Material and Heat Management in a Dmfc for Portable Usage
Yuusuke Sato1, Kei Matsuoka1, Eiichi Sakaue1 and Kyoji Hayashi2, (1)Corp. Research and Development Center, TOSHIBA Corp., 1, Komukai Toshiba-cho, Saiwai-ku, Kawasaki, 212-8582, Japan, (2)PC Development Center, TOSHIBA CORPORATION Personal Computer & Network Company, 2-9, Suehiro-Cho, Ome, 198-8710, Japan |
Sofc System Components Modeling and Integration
Yi Jiang, Corning Inc, Science Center Drive, SP-TD-01-1, Corning, NY 14831 and Scott C. Pollard, Science & Technology, Corning Inc, Science Center Drive, SP-AR-02-2, Corning, NY 14831 |