Preliminary Program subject to change
T1008 Fuel Processing Session III: Reactor Development and Modeling
OverviewReactor design, fabrication, and modeling work for hydrogen production for fuel cells are solicited and the reactions of interest include steam reforming, partial oxidation, autothermal reaction, high and low temperature gas shift reaction and preferential oxidation.
Primary SponsorTopical 1 - Fuel Cells Technology (T1)

Chair

Yushan Yan
Associate Professor
Chemical and Environmental Engineering
University of California, Riverside
900 University Avenue
Riverside, CA 92521
Phone Number: 951-827-2068
Fax Number: 951-827-5696
Email: yushan.yan@ucr.edu

CoChair

Zoe Ziaka-Vasileiadou


Email: Zziaka7@aol.com
Hierarchical Modeling of Integrated Microdevices for Hydrogen Production
Soumitra Deshmukh1, Niket Kaisare1 and Dionisios G. Vlachos2, (1)Chemical Engineering, University of Delaware, 355, Colburn Laboratory, Newark, DE 19716, (2)University of Delaware, Department of Chemical Engineering, 150 Academy St., 325 Colubrn Lab, Newark, DE 19716
A Modeling and Experimental Study of CO2-Selective Water-Gas-Shift Membrane Reactor for Fuel Cells
Jin Huang, Jian Zou and W.S. Winston Ho, Department of Chemical and Biomolecular Engineering, The Ohio State University, 125A Koffolt Labs, 140 West 19th Avenue, Columbus, OH 43210-1180
Modeling and Simulations of Methane Steam Reforming in Thermally Coupled Plate Type Membrane Reactor
Keyur Patel, Chemical Engineering, University of South Florida, 4202 E. Fowler Ave, ENB 118, Tampa, FL 33620 and Aydin Sunol, University of South Florida, 4202 E. Fowler Ave, ENB 118, Tampa, FL 33620
A Comparison between Ceramic Foam Catalyst and Packed-Beds for Methanol Steam Reforming
Christopher P. Thurgood, J.C. Amphlett, R.F. Mann and B.A. Peppley, Department of Chemistry & Chemical Engineering, Royal Military College, Kingston, ON K7K 7B4, Canada
Online Estimation of Ato Catalyst Reaction Rate Parameter for Fuel Cell System
Xinqun Huang, Chemical and Biologica Engineering, RPI, 110, 8th street, Troy, NY 12180 and Lealon L. Martin, Department of Chemical and Biological Engineering, 133 Ricketts, 110 8th Street, Troy, NY 12180-3590
Hydrogen Production Via Steam Reforming in a Reverse-Flow Reactor
Frank Hershkowitz1, Paul Berlowitz1, Richard Socha1, Elise Marucchi-Soos1 and Jeffrey Frederick2, (1)ExxonMobil Research & Engineering Co., Route 22 East, Annandale, NJ 08801, (2)ExxonMobil Research & Engineering Co., 3225 Gallows Road, Fairfax, VA 22037
Modelling and Simulations of Methane Heat Exchange Reformer for Fuel Cell Applications
Keyur Patel, Chemical Engineering, University of South Florida, 4202 E. Fowler Ave, ENB 118, Tampa, FL 33620 and Aydin Sunol, University of South Florida, 4202 E. Fowler Ave, ENB 118, Tampa, FL 33620

Topical 1 - Fuel Cells Technology