Preliminary Program subject to change
02E13 Design and Synthesis of New Adsorbent Materials
OverviewThis session emphasizes the recent developments in design and synthesis of novel adsorbent materials, modern adsorbent bed configurations, and applications of these new materials in separation, purification and environmental protections. Presentations that study adsorption equilibrium and kinetics in new adsorbent materials are welcome. Of particular interest are innovative synthesis method for nanoporous materials and applications in fuel cell and hydrogen technology.
Primary SponsorAdsorption and Ion Exchange (02e)

Chair

Shuguang Deng
Assistant Professor
New Mexico State University
Department of Chemical Engineering
P.O. Box 30001, MSC 3805
Las Cruces, NM 88003
U.S.A.
Phone Number: 505-646-4346
Fax Number: 505-646-7706
Email: sdeng@nmsu.edu
Improvement of Adsorption Applications Using High Contacting Efficiency Microfibrous Entrapped Materials
Eric A. Luna, Ranjeeth Kalluri, Donald Cahela and Bruce Tatarchuk, Center for Microfibrous Materials Manufacturing, 230 Ross Hall, Dept. of Ch. E., Auburn, AL 36849-5127
A Nanostructured Chelating Adsorbent for the Capture of Gaseous Mercury: Synthesis and Characterization
Lei Ji and Neville G. Pinto, Chemical & Materials Engineering, University of Cincinnati, P.O. Box 210012, Cincinnati, OH 45221-0012
Effect of Dopant Addition on Phase Stability and Oxygen Sorption Properties of La-Sr-Co-Fe-O Perovskite Type Oxides
Qinghua Yin and Y.S. Lin, Department of Chemical and Materials Engineering, Arizona State University, Tempe, AZ 85287
Removal of Carbon Monoxide and Hydrogen from Air
Ravi Kumar, Praxair, Tonawanda, NY 14150 and Shuguang Deng, New Mexico State University, Department of Chemical Engineering, P.O. Box 30001, MSC 3805, Las Cruces, NM 88003, U.S.A.
Use of Composite Activated Alumina Adsorbents for Separation of Hydrocarbons from Olefin Containing Streams
F. Handan Tezel1, Timothy C. Golden2, Jon Mogan3 and Bruno Morin3, (1)Department of Chemical Engineering, University of Ottawa, 161 Louis-Pasteur, Ottawa, ON K1N 6N5, Canada, (2)Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195-1501, (3)Alcan Chemicals, 4000 Development Drive, Brockville, ON K6V 5V5, Canada
Moderate Temperature H2s Removal over High Specific Surface Area Sio2 Supported Zno Sorbent: Preparation and Characterization
Hongyun Yang1, Noppadon Sathitsuksanoh1, Yong Lu2 and Bruce J. Tatarchuk1, (1)Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, 230 Ross Hall, Auburn University, Auburn, AL 36849, (2)Chemistry, East China Normal University, 3663 North Zhongshan Road, Shanghai, 200062, China
Adsorption Fundamentals in Metal-Organic Frameworks from Molecular Modeling
Houston Frost1, Tina Düren2 and Randall Q. Snurr1, (1)Chemical and Biological Engineering, Northwestern University, 2145 Sheridan Rd., Evanston, IL 60208, (2)Institute for Materials and Processes, University of Edinburgh, School of Engineering and Electronics, Kenneth Denbigh Building, The King's Building, Mayfield Road, Edinburgh, EH9 3JL, United Kingdom
Adsorption of H2, N2, O2, Ch4 and CO2 on an Ordered Mesoporous Carbon Material
Li Zhou, Xiuwu Liu, Jingwen Li and Yaping Zhou, Tianjin University, High Pressure Adsorption Laboratory, School of Chemical Engineering and Technology, Tianjin, 300072, China

Separations Division