A Simple New Concept for Chemical Process Flowsheet Design and Analysis
Rafiqul Gani, Chemical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark, Loic d'Anterroches, CAPEC, Chemical Engineering Department, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark, Jamal el Ali Rashed, CAPEC, Department of Chemical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark and Luke E. K. Achenie, Chemical Engineering, University of Connecticut, 191 Auditorium Road, Storrs, CT 06269 |
Synthesis of Heat-Integrated Separation Sequences Involving Heat-Pumping
Robin Smith, Megan Jobson and Sonia Farrokhpanah, Centre for Process Integration, The University of Manchester, Sackville Street, PO Box 88, M60 1QD, Manchester, United Kingdom |
Quantifying the Effect of Process Design on Controllability and Operability
Vikram S. Shabde and Karlene Hoo, Chemical Engineering, Texas Tech Univ, Mail Stop 3121, Lubbock, TX 79409-3121 |
A Software Tool for Assessing the Financial and Technical Impacts of Changing Industrial Bio-Manufacturing Processes
Sunil A. Chhatre1, Richard Francis2, Kieran O'Donovan2, Nigel Titchener-Hooker1, Anthony R. Newcombe2 and Eli Keshavarz-Moore1, (1)The Advanced Centre for Biochemical Engineering, University College London, Torrington Place, London, United Kingdom, (2)Process Development Group, Protherics U.K. Limited, Blaenwaun, Ffostrasol, Llandysul, Wales, United Kingdom |
A New Physical Absorption Process for the Capture of Co2 from Co2-Rich Natural Gas Streams
Emmanuel Keskes, Claire S. Adjiman, Amparo Galindo and George Jackson, Centre for Process Systems Engineering, Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom |
Cascade Analysis Technique for Targeting Property-Based Material Reuse/Recycle Network
Denny K. S. Ng1, Dominic Chwan Yee Foo1, Vasiliki Kazantzi2 and Mahmoud M. El-Halwagi3, (1)School of Chemical and Environmental Engineering, University of Nottingham Malaysia, Jalan Broga, Semenyih, Selangor, 43500, Malaysia, (2)Texas A&M University, Department of Chemical Engineering, College Station, TX 77843-3122, (3)Department of Chemical Engineering, Texas A&M University, Department of Chemical Engineering, College Station, TX 77843-3122 |
Attainable Region Construction for Reactor Networks Exhibiting Limit Cycles
Benjamin J. Davis, UCLA Chemical Engineering Department, 5531 Boelter Hall, Los Angeles, CA 90095 and Vasilios Manousiouthakis, Chemical & Biomolecular Engineering Department, UCLA, 5531 Boelter Hall, Los Angeles, CA 90095-1592 |
|