| Traditional adsorbent materials are zeolite, activated carbon, activated alumina, and silica gel etc. made in bead and pellet structures and forms for fixed bed separation process. Proposal of oral presentations are invited on the topics devoted to, but are not limited to, the area of development of innovative adsorbent materials, structures and forms that lead to new process configuration, new separation applications and significant improvement of separation efficiency, etc. |
Molecular Modeling of the Adsorption of Small Molecules in Metal-Organic Frameworks
Krista S. Walton1, Houston Frost1, David Dubbeldam1, John J. Low2 and Randall Q. Snurr1, (1)Chemical & Biological Engineering, Northwestern University, 2145 Sheridan Road E136, Evanston, IL 60208, (2)UOP, 25 E. Algonquin Road, Des Plaines, IL 60017 |
The Interaction of Water with Metal Organic Framework-5 Simulated by Molecular Dynamics Using a New Non-Bonded Forcefield
Jeffery A. Greathouse, Geochemistry, Sandia National Laboratories, Albuquerque, NM 87185 and Mark D. Allendorf, Sandia National Laboratories, Mail Stop 9291, Livermore, CA 94551-0969 |
Mercury Adsorption on Activated Carbon
Bihter Padak, Michael Brunetti and Jennifer Wilcox, Chemical Engineering, Worcester Polytechnic Institute, 100 Institute Road, WPI, Department of Chemical Engineering, Worcester, MA 01609 |
Adsorption Equilibrium and Kinetics of Nitroaromatic Dye Removal: Comparing Vegetation-Polymer Beads and Activated Carbon
Jennifer L. Meehan, Washington Group International, Inc., 2435 Stevens Center Place, Richland, WA 99354 and Wudneh Admassu, Chemical Engineering, University of Idaho, PO Box 441021, Moscow, ID 83844-1021 |
Microfibrous Supported Catalysts/Sorbents: Novel Heterogeneous Contacting Systems with Enhanced Reaction Rates
Ranjeeth R. Kalluri, CM3, Dept. of Ch. E. , Auburn University, 230 Ross Hall , Auburn University,, Auburn, AL 36849, Donald Cahela, Chemical Engineering, Auburn University, Auburn, AL 36849 and Bruce J. Tatarchuk, Chemical Engineering, Auburn University, 0322A Haley Center, Auburn University, AL 36849 |
Carbon Replica from Silica Template Using Grand Canonical Monte Carlo Simulations
Surendra K. Jain, Department of Chemical Engineering, North Carolina State University, North Carolina State University, Raleigh, NC 27695, Keith E. Gubbins, North Carolina State University, Raleigh, NC 27695 and Roland J.-M. Pellenq, CNRS, Campus de Luminy, Centre de Recherche en Matière Condensée et Nanosciences, Marseilles, 13288, France |
Design of a Dual Purpose Air Filter for Semiconductor Clean Rooms
Ryan A. Sothen, Chemical Engineering, Auburn University, 0322A Haley Center, Auburn, AL 36849 and Bruce J. Tatarchuk, Center for Microfibrous Materials Manufacturing, 230 Ross Hall, Dept. of Ch. E., Auburn, AL 36849-5127 |
|