Preliminary Program subject to change
20017 Fuel Cells: Fuel Processing I
OverviewTBA
Primary SponsorCatalysis and Reaction Engineering Division (20)
Co-Sponsor(s)Alternate Fuels and New Technology (16d), Topical C: Fuel Cells and Alternative Fuel Systems (TC)

Chair

Michael P. Harold
Professor and Chair
Department of Chemical Engineering
University of Houston
S222 Engineering Building 1
Houston, TX 77204-4004
Phone Number: 713-743-4304
Fax Number: 713-743-4323
Email: mharold@uh.edu

CoChair

Tom R. Marrero
Professor
University of Missouri-Columbia
1313 Fieldcrest
Columbia, MO 65203
Phone Number: 573-882-3802
Fax Number: 583-884-4940
Email: marrerot@missouri.edu
Integrated Autothermal Micromembrane Fuel Processor for Fuel Cell Application
Kishori T. Deshpande, Chemical Engineering, MIT, 66-513, 25 Ames Street, Cambridge, MA 02142, M. A. Schmidt, Electrical Engineering and Computer Science, MIT, 39-521, 77 Massachusetts Avenue, Cambridge, MA 02139 and Klavs F. Jensen, Chemical Engineering, MIT, 66-566, 25 Ames Street, Cambridge, MA 02142
Hydrogen Production from Jet Fuel
Ivan C. Lee, US Army Research Laboratory, 2800 Powder Mill Road, Adelphi, MD 20783
Modeling the Transient Response of Heat Exchange Reformers
Christopher P. Thurgood, J. C. Amphlett, R. F. Mann and B. A. Peppley, Dept. of Chemistry and Chemical Engineering, Royal Military College, Kingston, ON K7K 7B4, Canada
Development of a Novel Flexible Fuel Reformer with Sulfur Tolerant Catalyst
Sudipta Chattopadhyay1, Sandeep Goud2, William A. Whittenberger1 and Martin Abraham3, (1)Catacel Corporation, Garrettsville, OH 44231, (2)University of Toledo, 2801 W. Bancroft, Toledo, OH 43606, (3)University of Toledo, Dept. of Chemical Engineering, MS 310, 2801 West Bancroft, Toledo, OH 43606
Hydrogen Generation by Partial Oxidation of Propane over Tio2- Al2o3 Supports
Vaidyanathan Subramanian, Chemical and Metallurgical Engineering Department, University of Nevada, MAIL STOP 388/LMR 474, Reno, NV 89557-0030, Ji Eun Choi, Chemical Engineering, POSTECH (Pohang University of Science and Technology), San 31, Hyoja-dong, Namgu, Phang, Kyungbuk, South Korea, Edmund G. Seebauer, University of Illinois, Department of Chemical Engineering, 600 S. Mathews, Urbana, IL 61802 and Richard I. Masel, Chemical Engineering, University of Illinois, 1206 W Green St, Urbana, IL 61801

Catalysis and Reaction Engineering Division