Preliminary Program subject to change
20035 Flow Visualization and Tomography
OverviewThis session focuses on flow visualization and tomography.
Primary SponsorCatalysis and Reaction Engineering Division (20)

Chair

Hugh Stitt
Professor
Johnson Matthey Catalysts
PO Box 1
Billingham
Cleveland, TS23 1LB
UK
Phone Number: 1642 522704
Fax Number: 1642 522606
Email: hugh.stitt@matthey.com

CoChair

Muthanna H. Al-Dahhan
Associate Professor and Associate Director, CREL
Chemical Engineering Department - Washington University
One Brookings Dr.
Saint Louis, MO 63130
Phone Number: 314-935-7187
Fax Number: 314-935-4832
Email: muthanna@che.wustl.edu
Genetic Algorithm Based Fast X-Ray Ct Technique Applied in Multiphase Flow Measurement
Yi Cheng, Changning Wu, Yulong Ding and Yong Jin, Department of Chemical Engineering, Tsinghua University, Beijing, China
Simulation and Experimental Studies in Dual Source Gamma Ray Computer Tomography for Imaging Three Phase Systems
Rajneesh Varma, Chemical Engineering, Washington University, Campus Box 1198; One Brookings Drive, Saint Louis, MO 63130 and Muthanna H. Al-Dahhan, Chemical Engineering, Washington University in St Louis, St Louis, MO 63130
Imaging Large Vessels Using Cosmic-Ray Muon Energy-Loss Techniques
Stefaan J. R. Simons, Department of Chemical Engineering, University College London, Torrington Place, London, WC1E 7JE, United Kingdom, Paul M. Jenneson, Dept. of Physics, School of Electronics and Physical Sciences, University of Surrey, School of engineering, Guildford, Surrey GU2 7XH, UK, Walter Gilboy, Department of Physics, University of Surrey, School of Physical Sciences and Electronics, Guildford, GU2 7XH, United Kingdom, Dominic Rhodes, Nexia Solutions, Seascale, Sellafield, Cumbria, CA20 1PG and Steven Stanley, H260 Hinton House, Nexia Solutions, Risley, Warrington, WA3 6AS, United Kingdom
Linking 3-D Electrical Tomography Imaging to Fluid Flow Patterns in an Annular Flow Fixed-Bed Reactor
Hristo Hristov1, David Stephenson1, Reginald Mann1, Gary Bolton2 and Hugh Stitt3, (1)CEAS, The University of Manchester, Sackville St, Manchester, M60 1QD, United Kingdom, (2)Industrial Tomography Systems, 47 Newton Street, Manchester, United Kingdom, (3)Johnson Matthey Catalysts, PO Box 1, Billingham, Cleveland, TS23 1LB, United Kingdom

Catalysis and Reaction Engineering Division