Preliminary Program subject to change
12F00 Impact of Process Intensification on Process Design
OverviewPapers in this session examine the practical aspects of retrofitting an intensified process in an existing installation, as well as the benefits derived. For example, review issues involved in the transition, what the key issue is the might drive the change, and financial, exergy or environmental improvements after the change.
Primary SponsorProcess Intensification (12f)

CoChair

Jonathan H. Worstell
Senior Staff Chemist/Engineer
Shell Chemical Company
3333 Highway 6 South
Houtson, TX 77082
Phone Number: 281-544-7907
Email: jon.worstell@shell.com

CoChair

Laurence R. Weatherley
Professor and Chair
Chemical and Petroleum Engineering
The University of Kansas
Learned Hall
1530 W. 15th St. Room 4132
Lawrence, KS 60045-7609
Phone Number: 785-864-3553
Fax Number: 785-864-4967
Email: lweather@ku.edu
Systematic Retrofit Design of Batch Processes Using an Indicator and Model Based Framework
Levente L. Simon1, Ulrich Fischer2 and Konrad Hungerbuehler2, (1)Institute for Chemical and Bioengineering, Safety and Environmental Technology Group, ETH Zurich, G-138, HCI, ETH Hoenggerberg, Zurich, 8093, Switzerland, (2)Institute for Chemical and Bioengineering, ETH Zurich, G-138, HCI, ETH Hoenggerberg, Zurich, 8093, Switzerland
Comparison of Enzymatic and Chemical Epoxidation of Oleic Acid Esters in a Fluidised Bed Reactor
Daniela H. Müller, Florian Pontzen, Sven Eichholz, Marcel A. Liauw and Lasse Greiner, RWTH Aachen, Institute of Technical and Macromolecular Chemistry, Worringerweg 1, Aachen, 52074, Germany
Experimental Study of the Process for Making Tackifier Dispersions Used in Pressure-Sensitive Adhesives
Daoyun Song1, Wu Zhang1, Earl G. Melby2 and Rakesh K. Gupta1, (1)Chemical Engineering, West Virginia University, 395 Evansdale Drive, Morgantown, WV 26506, (2)Dyna-Tech Adhesives, Grafton, WV 26354
Experimental Verification of Hydrodynamic Multiplicity in an Industrial Trickle Bed Reactor
Werner Van der Merwe1, Arie J. van Houwelingen1 and Willie Nicol2, (1)Research & Development, Sasol Technology, Klasie Havenga Road 1, Sasolburg, South Africa, (2)University of Pretoria, Lynnwood Road 1, Pretoria, South Africa
Gas-Liquid Mass Transfer in Slug Flow through Narrow Channels
Srinivasan Ambatipati, Process Intensification & Clean Technology (PICT) Group, Department of Chemical and Biomolecular Engineering, Clarkson University, PO Box 5707, Potsdam, NY 13699 and Roshan J. J. Jachuck, Process Intensifcation & Clean Technology (PICT) Group, Department of Chemical and Biomolecular Engineering, Clarkson University, PO Box 5705, Potsdam, NY 13699
Experimental and Theoretical Investigation of Photopolymerization Using a Narrow Channel Reactor
Venkata Nekkanti and Roshan J. J. Jachuck, Chemical and Biomolecular Engineering, Clarkson University, Potsdam, NY 13699
Thermodynamic and Graphical Analysis of Integrated Processes: a Reactive Distillation Process Case Study
Geoffrey K. Ngigi, Bilal Patel, David Glasser and Diane Hildebrandt, School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, 1 Jan Smut Avenue, Johannesburg, South Africa

Process Development Division