Product Design as an Undergraduate Capstone at Columbia University
Michael Hill, M. Hill & Associates, 31 Winding Trail, Mahwah, NJ 07430, Rastislav Levicky, Columbia University, 500 West 120th Street, Room 801, New York, NY 10027 and Alan C. West, Chemical Engineering, Columbia University, 500 W. 120th St., 801 Mudd Dept of Chemical Engineering, New York, NY 10027 |
Integrating a High-Throughput Screening Lab and Case-Studies into Product Design Courses
Christopher W. Jones, Georgia Institute of Technology, 311 Ferst Dr, Atlanta, GA 30332-0100, Carson Meredith, School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA 30309 and Matthew J. Realff, Chemical and Biomolecular Engineering, Georgia Tech, 311 Ferst Drive, N.W., Atlanta, GA 30332-0100 |
Computer-Aided Product Design
Jens Abildskov, Dept. of Chemical Engineering, Denmark Technical University, Room # 226, Bldg. 227,, Søltoft Plads, Kgs. Lyngby, 2800, Denmark and Rafiqul Gani, Chemical Engineering, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark |
Capstone Project Design Experiences on Product Design
Miguel J. Bagajewicz, Chemical, Biological and Materials Engineering, University of Oklahoma, 100 E. Boyd St., T-335, Norman, OK 73019 |
Teaching Chemical Product Design
Edward L. Cussler, University of Minnesota, 421 Washington Ave SE, Minneapolis, MN 55455 and Geoffrey D. Moggridge, Department of Chemical Engineering, University of Cambridge, New Museums Site, Pembroke Street, Cambridge, CB23RA |
Management Support for the Aiche National Student Design Competition
Richard L. Long, New Mexico State University, Chemical Engineering Department, P.O. Box 30001, MSC 3805, Las Cruces, NM 88003-8001 |
|