Preliminary Program subject to change
T7011 Sustainability in Product Design
OverviewThis session will include discussion of progress and issues in product design relevant to sustainability.
Primary SponsorTopical 7: Product Design (T7)
Co-Sponsor(s)Environmental Division (See also Topical 1) (09), Process Development Division (12), Sustainable Engineering Forum (See also Topical E) (23)

Chair

Russell F. Dunn
Ph.D., P.E.
Polymer and Chemical Technologies, LLC
1431 Glenmore Drive
Cantonment, FL 32533
Phone Number: 850-937-8311
Fax Number: 850-937-8309
Email: rdunn@polymerchemtech.com

CoChair

Helen H. Lou
Associate Professor
Department of Chemical Engineering
Lamar University
P.O.Box 10053
Beaumont, TX 77710
Phone Number: 409-880-8207
Fax Number: 409-880-2197
Email: louhh@hal.lamar.edu
Inertial Separation of Airborne Nanoparticles with Fibrous Filters
Yoshio Otani, Kanazawa University, Kakuma-machi, Kanazawa, 920-1192, Kanazawa, Japan, J. C. Kim, Chemical Engineering, Kanazawa University, Kakuma-machi, Kanazawa, 920-1192, Kanazawa, Japan and Naoko Tajima, Kanomax, 2-1 Shimizu, Suita, NH, Japan
Simulations of Binary Mixture Adsorption of Carbon Dioxide and Methane in Carbon Nanotubes
Liang-Liang Huang1, Xin Feng1, Qing Shao1, Ling-Hong Lu1 and Xiao-Hua Lu2, (1)Nanjing University of Technology, Nanjing, 210009, China, (2)College of Chemical Engineering, Nanjing University of Technology, Nanjing, 210009, China
Tracing the Path to Success in Industrial Catalyst Development
Lorna Ortiz-Soto, Styrene, CRI/Criterion Catalysts, 3333 Highway 6 South, Houston, TX 77082
K2CO3 Supported Sodalite: Control of Carbon Nanoparticles Emission for the Rectification of Air Contaminants
S. P. Elangovan1, Masaru Ogura2, Hiroshi Tanada3 and Tatsuya Okubo1, (1)Department of Chemical System Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan, (2)Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro, Tokyo 153-8505, Japan, (3)Advanced Powertrain Development Department, Mitsubishi Motors Corporation, Japan
Striking Gold in Catalyst Development
Corey Evans, Styrene, CRI/Criterion Catalysts, 3333 Highway 6 South, Houston, TX 77082
Development of a Process for Manufacturing Industrially Important Chemical Products from Sustainable, Bio-Based Glycerol
Jeffrey R. Seay, Process Technology and Engineering Department, Degussa Corporation, 4301 Degussa Road, Mobile, AL 36590, Mario R. Eden, Department of Chemical Engineering, Auburn University, 230 Ross Hall, Auburn University, AL 36849-5127, Robert N. D'Alessandro, Process Engineering Department, Degussa Corporation, 4301 Degussa Road, PO Box 868, Theodore, AL 36590-0606, Thomas Thomas, Department of Electrical and Computer Engineering, University of South Alabama, 307 N. University Blvd, Mobile, AL 36688, Hubert Redlingshoefer, Feed Additives Research, Degussa AG, Rodenbacher Chaussee 4, Hanau-Wolfgang, Germany and Christoph Weckbecker, Feed Additives, Degussa AG, Rodenbacher Chaussee 4, Hanau-Wolfgang, Germany
The Industrial Matebolism of Chlorine in China
Ning Yang1, Dingjiang Chen1, Shanying Hu1 and Yong Jin2, (1)Center for Industrial Ecology, Department of Chemical Engineering, Tsinghua University, Beijing, China, (2)Department of Chemical Engineering, Tsinghua University, Beijing, China

Topical 7: Product Design