Preliminary Program subject to change
01D02 Mathematical Modeling of Transport Processes
OverviewThis session focuses on mathematical methods, both analytical and numerical, applied to the simulation and prediction of transport processes. The focus is more on the methods used to obtain solutions to problems in transport phenomena rather than on the phenomena themselves.
Primary SponsorTransport Processes (01d)

Chair

Norman W. Loney
Associate Professor
NJIT
Otto H. York Department of Chemical Engineering
161 Warren St
Newark, NJ 07102
Phone Number: 973-596-6598
Fax Number: 973-596-8436
Email: loney@adm.njit.edu

CoChair

Nivedita R. Gupta
Assistant Professor
University of New Hampshire
Depratment of Chemical Engineering
257 Kingsbury Hall, 33 College Road
Durham, NH 03824
Phone Number: 603 862 3655
Fax Number: 603 862 3747
Email: ngupta@unh.edu
Off-Lattice Monte Carlo Simulation for Heat Transfer through Carbon Nanotube Composites
Dimitrios V. Papavassiliou1, Hai M. Duong2, Lloyd L. Lee1 and Kieran Mullen3, (1)Chemical, Biological and Materials Engineering, The University of Oklahoma, 100 East Boyd St., SEC T-335, Norman, OK 73019, (2)School of Chemical, Biological and Materials Engineering, The University of Oklahoma, 100 East Boyd, SEC T335, Norman, OK 73019, (3)Physics and Astronomy, The University of Oklahoma, 100 East Boyd St., SEC T-335, Norman, OK 73019
Early Time Analysis of Transport Processes
Jerry H. Meldon, Tufts University, Chemical and Biological Engineering Department, Medford, MA 02155
Mathematical Modeling of Percutaneous Absorption of Volatile Organic Liquids
Siladitya Ray Chaudhuri, Chemical and Materials Engineering, University of Cincinnati, 497 Rhodes Hall, ML0012, Cincinnati, OH 45221-0012, Rachna M. Gajjar, College of Pharmacy, University of Cincinnati Medical Center, 3223 Eden Avenue, Cincinnati, OH 45267-0004, Gerald B. Kasting, College of Pharmacy, University of Cincinnati, 407 Health Professions Building, Cincinnati, OH 45267 and William B. Krantz, Chemical and Biomolecular Engineering, National University of Singapore, Room E5-02-11, Block E5, 4 Engineering Drive 4, Singapore 117576, Singapore
Analytical Modeling of the Forced Gravity Drainage Gagd Process
Madhav M. Kulkarni, Technology Services, Marathon Oil Company, 5555 San Felipe Rd., Houston, TX 77056
Mathematical Modeling of New Phase Growth Due to Solute Diffusion
Jalal Abedi and Seyed Jalaladdin Hashemi, Chemical and Petroleum Engineering, University of Calgary, 2500 University Drive, NW, Calgary, AB T2N 1N4, Canada
Modeling of Non-Newtonian Reactive Systems in Tubular Reactor
Rajeev K. Garg, Chemical Engineering Department, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi, India and V. K. Srivastava, Chemical Engineering, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi, India
Analytical and Experimental Studies of Mass Transfer and Separation of Species in a Wavy-Walled Tube by Imposed Fluid Oscillation
Gatwech Thich1, Aaron M. Thomas1 and Ranga Narayanan2, (1)Chemical Engineering, University of Idaho, PO Box 441021, Moscow, ID 83844-1021, (2)University of Florida, University of Florida Chemical Engineering Department, Gainesville, FL 32611
Simulations of Miscible Viscous Fingering Phenomena Using Adaptive Discontinuous Galerkin Methods
Shuyu Sun, Department of Mathematical Sciences, Clemson University, Clemson, SC 29634
Modelling Wave Enhanced Mass Transfer in Falling Films Using Effective Diffusion Coefficients
André Schagen and Michael Modigell, Department of Chemical Engineering, Chair of Mechanical Unit Operations, RWTH Aachen University, Turmstr. 46, Aachen, 52064, Germany
Prediction of Tobacco Temperature and Oxygen Profiles in Warehouse Aging Process
Yizhou Zheng, R&D, USSTMLP, 800 Harrison Street, Nashville, TN 37203
An Analogy between Chemical Reaction and Heat Transfer
Stuart W. Churchill, Chemical and Biomolecular Engineering, University of Pennsylvania, 137 Polecat Road, Glen Mills, PA 19342

Engineering Sciences and Fundamentals