Preliminary Program subject to change
TC001 Fuel Cell Technology II
OverviewThis session is for oral presentations on fuel cell technology.
Primary SponsorTopical C: Fuel Cells and Alternative Fuel Systems (TC)

Chair

Hossein Hariri
Associate Professor and Head
Chemical Engineering Department, Rose-Hulman Institute of Technology
5500 Wabash Avenue
Terre Haute, IN 47803
Phone Number: 812-877-8381
Fax Number: 812-877-8992
Email: m.h.hariri@rose-hulman.edu

CoChair

Ravindra Datta
Worcester Polytechnic Institute
100 Institute Road
Worcester, MA 01609-2280
Phone Number: 508-831-6036
Fax Number: 508-831-5853
Email: rdatta@wpi.edu
Welcoming Remarks
Novel and High Performance Electrodes with Nano-Hybrid Hydrocarbon Ionomers of Pemfc for Broad Temperature Range and Lower Humidity Condition
Ju-Myeung Lee, G.M. Anilkumar and Takeo Yamaguchi, Department of chemical system engineering, University of Tokyo, 7-3-1 Hongo Bunkyo-ku, Tokyo, Japan
Direct Methanol Fuel Cell System Performance: from Materials, Components, to System and Fuel Efficiency
Deryn Chu and Rongzhong Jiang, U.S. Army Research Laboratory, 2800 Powder Mill Rd., Adelphi, MD 20854
A Steady State Three-Dimensional Model for a Pemfc System to Simulate Water Transport and Performance Characteristics
Arun Pandy, Systems Department, United Technologies Research Center, 411 Silver Lane, MS 129-15, East Hartford, CT 06108, Arvind Raghunathan, Systems, United Technologies Research Center, 411 Silver Lane, MS 129-15, East Hartford, CT 06108, Nikunj Gupta, Fuel Cell Program office, United Technologies Research Center, 411 Silver Lane, MS 129-15, East Hartford, CT 06108 and Andrew Haug, UTC Power, 195 Governor's Hwy, South Windsor, CT 06074
Water Management in a 25cm2 Pem Fuel Cell with Electroosmotic Pumping
Shawn E. Litster, Cullen R. Buie, Tibor Fabian, Jonathon D. Posner and Juan G. Santiago, Stanford University, Stanford, CA 94305
Equivalent Circuit Models for Polymer Electrolyte Fuel Cell Stacks in Parallel at Operational Loads
Wenhua H. Zhu, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, 230 Ross Hall, Auburn University, AL 36849, Robert U. Payne, Department of Chemical Engineering, Auburn University, 230 Ross Hall, Auburn, AL 36849, Donald Cahela, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, AL 36849, R. M. Nelms, Department of Electrical Engineering, Auburn University, 200 Broun Hall, Auburn, AL 36849 and Bruce J. Tatarchuk, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, 230 Ross Hall, Auburn University, AL 36849-5127
The Evaluation of the Feeding Effect on Liquid-Feed Dmfc Using Rigorous Dynamic Simulation
Ilyong Jeong and Il Moon, Department of Chemical Engineering, Yonsei University, Shinchon-dong 134, Seodaemoon-ku, Seoul, South Korea
Preparation and Characterization of Microporous Layers for Gas Diffusion Media
Sehkyu Park1, Jong-Won Lee1, Branko Popov1, Robert E. Mammarella2 and Kimiaki K. Miyamoto2, (1)Department of Chemical Engineering, University of South Carolina, 301 Main Street, Swearingen Engineering Center, Columbia, SC 29208, (2)Greenwood Research Laboratory, Fuji Photo Film Inc., Greenwood, SC 29648

Topical C: Fuel Cells and Alternative Fuel Systems