Preliminary Program subject to change
T9004 Biosensors III: Saw Devices and Sensor Development
OverviewAs the final session of the Advances in Biosensors series, Biosensors III will focus on applications of SAW devices, and novel sensor development and analysis.
Primary SponsorTopical 9: Sensors (T9)
Co-Sponsor(s)Research and New Technology Committee (18j)

Chair

Kyung A. Kang
Associate Professor
Chemical Engineering
University of Louisville
Eastern Parkway
Louisville, KY 40292
Phone Number: 502-852-2094
Fax Number: 502-852-6355
Email: kyung.kang@louisville.edu

CoChair

Wilfred Chen
University of California, Riverside
A242 Bourns
Riverside, CA 92521
Phone Number: 909-787-2473
Email: wilfred.chen@ucr.edu
Simultaneous Surface Manipulation and Sensing in a Biosensor Using a Hexagonal Saw Device
Stefan Cular1, Venkat R. Bhethanabotla1 and Darren W. Branch2, (1)Department of Chemical Engineering, University of South Florida, 4202 East Fowler Ave., ENB 118, Tampa, FL 33620, (2)Biosensors and Nanomaterials Department, Sandia National Laboratories, Albuquerque, NM 87185
Finite Element Modeling of Acoustic Streaming in Surface Acoustic Wave (Saw) Devices
Subramanian Sankaranarayanan, University of South Florida, Dept. of Chemical Engg., ENB 118, 4202 E Fowler Avenue, Tampa, FL 33620, Stefan Cular, Department of Chemical Engineering, University of South Florida, 4202 East Fowler Ave., ENB 118, Tampa, FL 33620, Venkat R. Bhethanabotla, Chemical Engineering Department, University of South Florida, 4202 E. Fowler Ave., Tampa, FL 33620 and Babu Joseph, Chemical Engineering Department, University of South Florida, 4202 E. Fowler Avenue, ENB 118, Tampa, FL 33620
Development and Characterization of Antibody Molecules on Peg Tethered Aln-Based Biosensors
Ting Cao1, Anfeng Wang1, Xuemei Liang1, Haiying Tang1, Gregory W. Auner2, Steven O. Salley1 and K. Y. Simon Ng1, (1)Department of Chemical Engineering and Materials Science, Wayne State University, 5050 Anthony Wayne Dr., Detroit, MI 48202, (2)Department of Electrical and Computer Engineering, Wayne State University, 5050 Anthony Wayne Dr., Detroit, MI 48202
Treatment of Aluminum Nitride Biosensor Surfaces for Improved Silanization
Leland Rosenberger1, Hitesh Handa1, Guangzhao Mao1, Gregory W. Auner2 and Gina Shreve1, (1)Chemical Engineering and Materials Science, Wayne State University, 5050 Anthony Wayne Drive, Detroit, MI 48202, (2)Electrical and Computer Engineering, Wayne State University, 5050 Anthony Wayne Drive, Detroit, MI 48202
Development of an Amperometric Sensor for Chiral Recognition in Organic Solvent Using the Gate Effect of Molecularly Imprinted Polymer
Shin-ichi Sekine1, Yuta Watanabe1, Yasuo Yoshimi1, Koji Hattori2 and Kiyotaka Sakai2, (1)Applied Chemistry, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo, 135-8548, Japan, (2)Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo, 169-8555, Japan
Micro-Chameleons: Nonlinear Chemical Microsystems for Amplification and Sensing
Kyle J. M. Bishop1, Tim P. Gray2, Marcin Fialkowski3 and Bartosz A. Grzybowski3, (1)Dept of Chemical and Biological Engineering, Northwestern University, 2145 Sheridan Rd/TechE136, Evanston, IL 60208, (2)Chemistry, Northwestern University, 2145 Sheridan Rd/TechE136, Evanston, IL 60208, (3)Chemical Engineering, Northwestern University, 2145 Sheridan Rd/TechE136, Evanston, IL 60208
Fractal Binding and Dissociation Kinetics of Heart-Related Compounds on Biosensor Surfaces
Ajit Sadana, Chemical Engineering, University of Mississippi, Anderson Drive, Oxford, MS 38677-1848 and Atul M. Doke, University of Mississippi, Anderson Drive, Oxford, MS 38677-1848

Topical 9: Sensors