Preliminary Program subject to change
01J06 Non-Newtonian Flows
OverviewThis session will focus on hydrodynamic phenomena in non-Newtonian fluids, including macroscopic flows and rheology.
Primary SponsorFluid Mechanics (01j)

Chair

Anne M. Grillet
Senior Member of Technical Staff
Sandia National Laboratories
P.O. Box 5800, MS 0834
Albuquerque, NM 87185-0834
Phone Number: 505-844-7453
Email: amgrill@sandia.gov

CoChair

Satish Kumar
Assistant Professor
Chemical Engineering and Materials Science
University of Minnesota
151 Amundson Hall
421 Washington Ave. SE
Minneapolis, MN 55455
Phone Number: 612-625-2558
Fax Number: 612-626-7246
Email: kumar@cems.umn.edu
Computational Studies of the Motion of a Nematic Lcp in a Simple Shear Device
D. Harley Klein1, Hector D. Ceniceros2, Carlos J. Garcia-Cervera3 and L. Gary Leal1, (1)Chemical Engineering, University of California Santa Barbara, Engineering II, Rm 3357, Santa Barbara, CA 93106, (2)Mathematics, University of California Santa Barbara, South Hall, Rm 6710, Santa Barbara, CA 93106, (3)Mathematics, University of California Santa Barbara, South Hall, Rm 6707, Santa Barbara, CA 93106
Structure and Rheology of Shear-Banding Wormlike Micellar Solutions
Norman J. Wagner, Chemical Engineering, University of Delaware, 150 Academy Street, Newark, DE 19711, Florian Nettesheim, University of Delaware, 150 Academy St, Newark, DE 19716, Lionel Porcar, NIST Cold Neutron Research Center, National Institute for Standards and Technology, 100 Bureau Drive, Bldg. 235, STOP 8562, Gaithersburg, MD 20899 and Eric W. Kaler, University of Delaware, 102 P.S. DuPont Hall, Newark, DE 19711
Rheo-Optics of Equilibrium Polymer Solutions: Wormlike Micelles in Planar Elongation
Jai A. Pathak, Polymer Physics Section, Materials Chemistry Branch, U. S. Naval Research Lab, 4555 Overlook Avenue SW, Bldg. 207, Washington, DC 20375-5342 and Steven D. Hudson, Polymers Division, NIST, 100 Bureau Dr., STOP 8542, Gaithersburg, MD 20899
Extensional Rheometry on a Chip: Flows of Dilute Polymer Solutions in Microfluidic Contractions
Gareth H. McKinley, Mechanical Engineering, Massachusetts Institute of Technology, Building NE 47-511, 77 Massachusetts Avenue, Cambridge, MA 02139, Lucy Rodd, Chemical Engineering, University of Melbourne, Melbourne, Australia, Mónica S. N. Oliveira, Chemical Engineering, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal and Justin C. Cooper-White, Chemical Engineering, University of Queensland, Brisbane
Low-Dimensional Models for Exact Coherent Structures in Viscoelastic Shear Flows
Anshuman Roy1, Alexander Morozov2, Wim Van Saarloos2 and Ronald G. Larson1, (1)Chemical Engineering, University of Michigan, 2300 Hayward St., Ann Arbor, MI 48109, (2)Instituut-Lorentz for Theoretical Physics, University of Leiden, P.O. Box 9506, Leiden 2300 RA, Leiden, Netherlands
Viscoelastic Nonlinear Traveling Waves and Drag Reduction in Plane Poiseuille Flow
Wei Li and Michael D. Graham, Chemical and Biological Engineering, University of Wisconsin-Madison, 1415 Engineering Dr., Madison, WI 53706
Effect of Flexibility on the Shear-Induced Migration of Short Polymers in Parabolic Channel Flow
David Saintillan1, Eric S. G. Shaqfeh2 and Eric Darve1, (1)Mechanical Engineering, Stanford University, Stanford, CA 94305, (2)Departments of Chemical and of Mechanical Engineering, Stanford University, Stanford, CA 94305
Elastic Instabilities of Polymeric Solutions in Cross-Channel Flow
Paulo E. Arratia, University of Pennsylvania, Philadelphia, PA 19104 and Jerry P. Gollub, Haverford College, 370 Lancaster Avenue, Haverford, PA 19041
Dynamics of Polymeric Solutions in Prototypical Processing Geometries: a Multiscale Simulation Approach
Anantha P. Koppol, Radhakrishna Sureshkumar and Bamin Khomami, Department of Chemical Engineering, Washington University in St. Louis, Campus Box 1198, One Brookings Drive, St. Louis, MO 63130-4899
Comprehensive Modeling of Nonisothermal Polymer Jets in Melt Electrospinning
Eduard Zhmayev1, Huajun Zhou2 and Yong Lak Joo1, (1)School of Chemical & Biomolecular Engineering, Cornell University, Ithaca, NY 14853, (2)Department of Materials Science & Engineering, Cornell University, Ithaca, NY 14853

Engineering Sciences and Fundamentals