Electro-Osmosis at Liquid-Liquid Interfaces
Todd M. Squires, Chemical Engineering, University of California, Santa Barbara, University of California, Santa Barbara, CA 93106 |
Particle Manipulation on a Chip Using Conventional and Traveling-Wave Dielectrophoresis
Anil Kumar1, Boris Khusid2, Conrad James3 and Andreas Acrivos1, (1)Department of Chemical Engineering, The Levich Institute, 1M2, Steinman Hall, The Levich Institute, 140th Street & Convent Avenue, New York, NY 10031, (2)Mechanical Engineering, New Jersey Institute of Technology, University Heights, Newark, NJ 07102, (3)Sandia National Laboratories, Albuquerque, NM |
Dynamic Assembly in Nanochannels Manipulated by Electrokinetics
Shengnian Wang, Chemical and Biomolecular Engineering, The Ohio State University, 140 West 19th Avenue, 425 Koffolt Labs, Columbus, OH 43210, Xin Hu, Mechanical Engineering, Ohio State University, 140 west 19th. Ave., Columbus, OH 43210, Orin L. Hemminger, Chemical and Biomolecular Engineering, Ohio State University, 140w 19th ave, Columbus, OH 43210 and L. James Lee, Chemical and Biomolecular Engineering, The Ohio State University, 140 West 19th. Avenue, Columbus, OH 43210 |
Surface-to-Surface Transfer Printing of Liquid Inks
Chaitanya Gupta, Chemical & Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801, Mark A. Shannon, Mech. & Ind. Eng., University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 and Paul J. A. Kenis, Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 |
Deflection Stability of an Electrohydrodynamic Liquid Bridge
Sibel Korkut, Chemical Engineering, Princeton University, Olden Street, E-quad, Lapidus Lounge, Princeton, NJ 08540, Ilhan A. Aksay, Princeton University, A-311 Engineering Quadrangle, Princeton, NJ 08544 and Dudley A. Saville, Princeton University, A-302 Engineering Quadrangle, Princeton, NJ 08544 |
Continuous-Flow Dielectrophoretic Particle Sorting in Ridged Polymeric Microchannels
Aaron Ezekiel Smith, Benjamin G Hawkins, Yusef A Syed and Brian J Kirby, Sibley School of Mechanical & Aerospace Engineering, Cornell University, Ithaca, NY 14853 |
Flow between a Cavity and a Flexible Wall: Lubrication Model
and Finite-Element Calculations
Xiuyan Yin and Satish Kumar, Chemical Engineering and Materials Science, University of Minnesota, 151 Amundson Hall, 421 Washington Ave. SE, Minneapolis, MN 55455 |
Design and Testing of a Microfluidic Four-Roll Mill Device
Joo Sung Lee, Rebecca Dylla-Spears, Nerayo P. Teclemariam and Susan J. Muller, Department of Chemical Engineering, University of California at Berkeley, Berkeley, CA 94720 |
Modeling PCR in Natural Convection Systems
Kevin D. Dorfman, Department of Chemical Engineering and Materials Science, University of Minnesota, 151 Amundson Hall, 421 Washington Ave. SE, Minneapolis, MN 55455, Ehud Yariv, Technion, Faculty of Mechanical Engineering, Haifa Israel, 33,000, Israel and Guy Ben Dov, Faculty of Aerospace Engineering, Technion, Haifa, 33000, Israel |
Taylor Dispersion in Pcr in a Microchannel
Anubhav Tripathi, Engineering, Brown University, Providence, RI 02912 and Anuj Chauhan, Department of Chemical Engineering, University of Florida, Gainesville, FL 32611 |
|