Using Computational Fluid Dynamics to Study Effects of Fiber on the Air Flow from an Annular Melt Blowing Die
Holly M. Krutka, Chemical, Biological and Materials Engineering, University of Oklahoma, 100 E. Boyd St., Sarkeys Energy Center, T-335, Norman, OK 73019, Dimitrios V. Papavassiliou, Chemical, Biological and Materials Engineering, The University of Oklahoma, 100 East Boyd St., SEC T-335, Norman, OK 73019 and Robert L. Shambaugh, University of Oklahoma, 100 East Boyd Street, SEC T335, Norman, OK 73019 |
In-Mold Coating for Thermoplastic Substrates: Flow Modeling and Rheology
Narayan Bhagavatula, Chuckaphun Aramphongphun and Jose Castro, The Ohio State University, Columbus, OH 43210 |
Modeling of Morphological Development in Polyimide Microspheres Obtained from Powdered Precursors
Camilo I. Cano, School of Chemical Engineering, Purdue University, 480 Stadium Mall Dr., Forney Hall of Chemical Engineering, West Lafayette, IN 47907-2100 and R. Byron Pipes, Schools of Materials Engineering, Aeronautics and Astronautics and Chemical Engineering, Purdue University, 480 Stadium Mall Dr., Forney Hall of Chemical Engineering, West Lafayette, IN 47907-2100 |
Aspects of Foam Injection Molding a Thermoplastic Polyolefin with Chemical Blowing Agents
Andrew N. Hrymak, Xiaonan Qin and Michael R. Thompson, McMaster University, 1280 Main Street West, Hamilton, ON L8S4L7, Canada |
Understanding Polymer Nanofiber Electrospinning: Kinematic Measurements and Dimensional Analysis
Matthew H. Helgeson1, Kristie N. Grammatikos1, Norman J. Wagner1 and Joseph Deitzel2, (1)Chemical Engineering, University of Delaware, 150 Academy Street, Newark, DE 19711, (2)University of Delaware, 150 Academy Street, Newark, DE 19711 |
Melt Electrospinning of Polycaprolactone
Joshua L. Manasco, Chemical and Biomolecular Engineering, NC State University, 3010 Barrymore Street, Unit 108, Raleigh, NC 27603, Juan P. Hinestroza, Department of Textiles and Apparel, Cornell University, Ithaca, NY 14853 and Saad A. Khan, Department of Chemical and Biomolecular Engineering, North Carolina State University, 911, Partners Way, Raleigh, NC 27695 |
Polypropylene Film Casting
Kenneth K. Aniunoh and Graham H. Harrison, Chemical and Biomolecular Engineering and Center for Advanced Engineering Fibers and Films, Clemson University, 127 Earle Hall, Clemson, SC 29634-0909 |
|