Carbon Monoxide Cleanup of Reformate Feed for Proton Exchange Membrane Fuel Cells Using an Electrochemical Membrane Reactor
Saurabh Vilekar and Ravindra Datta, Chemical Engineering, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609 |
Selective Oxidation of Carbon Monoxide to Carbon Dioxide over Cobalt-Based Supported Catalysts for Hydrogen Clean-up in P.E.M. Fuel Cells
Matthew M. Yung and Umit S. Ozkan, Chemical & Biomolecular Engineering, Ohio State University, 140 W. 19th Ave., #125B, Columbus, OH 43210 |
Development of Sulfur Tolerant Reforming Catalyst for Diesel and Jet Fuel: Understanding the Reaction Pathways and Catalyst Characterization
Atish Kataria1, Sandeep Goud2, Amanda C. McCoy3, Satish Lakhapatri3 and Martin Abraham4, (1)Chemical and environmental engineering department, University of Toledo, 2801 W Bancroft, 3048 Nitschke hall, Toledo, OH 43606, (2)Chemical Engineering, University of Toledo, 2801 W. Bancroft, Toledo, OH 43606, (3)Chemical and Environmental Engineering, University of Toledo, 2801 W. Bancroft, 3048 Nitschke Hall, Toledo, OH 43606, (4)University of Toledo, Dept. of Chemical Engineering, MS 310, 2801 West Bancroft, Toledo, OH 43606 |
Doped Zno Sorbents for H2S Removal with High Capacity and Wide Temperature Characteristics
Hongyun Yang1, Sachin Nair1 and Bruce J. Tatarchuk2, (1)Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, Auburn, AL 36849, (2)Department of Chemical Engineering, Center for Microfibrous Materials Manufacturing, 230 Ross Hall, Auburn University, AL 36849-5127 |
|