| This session will concentrate on adsorptive separation processes. Pressure swing, Temperature swing, Vacuum Swing, Concentration Swing, Electrical Swing or any other new processes or concepts may be presented. Experimental and/or numerical simulation results will be discussed. The processes may be for trace impurity removal, bulk separation and/or producing multiple products from the same stream. Hybrid processes, such as adsorption-distillation, adsorption-membrane etc. may also be presented. Both gas and liquid separations will be included. Industrial participation will be encouraged |
| Introductory Remarks |
A High Temperature Adsorption Process For Air Separation
Arvind Rajendran, School of Chemical and Biomedical Engineering, Nanyang Technological University, Nanyang Drive 62, Singapore, Singapore and Shamsuzzaman Farooq, National University of Singapore, 4 Engineering Drive 4, Singapore, 117576, Singapore |
Novel Thermal Swing Sorption Enhanced Reaction Process For Simultaneous Production Of Fuel-Cell Grade H2 And Compressed CO2 From Synthesis Gas
Ki Bong Lee, Michael G. Beaver, Hugo S. Caram and Shivaji Sircar, Department of Chemical Engineering, Lehigh University, Iacocca Hall, 111 Research Drive, Bethlehem, PA 18015 |
Extreme Configurations For Heavy Reflux Psa Cycles
James Ritter, Amal Mehrotra, Steven P. Reynolds and Armin D. Ebner, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208 |
Development Of Computer Aided Design Tools For Psa Processes
Giovanna Fiandaca1, Eric Fraga1 and Stefano Brandani2, (1)Department of Chemical Engineering, University College London, Torrington Place, London, WC1E 7JE, United Kingdom, (2)School of Engineering and Electronics, University of Edinburgh, Sanderson Building, The King's Buildings, EH9 3JL, Edinburgh, United Kingdom |
Simulation of Unique Pressure Changing Steps and Situations in Psa Processes
Armin D. Ebner1, Amal Mehrotra1, James C. Knox2, M. Douglas LeVan3 and James A. Ritter1, (1)Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, (2)Marshall Space Flight Center, Huntsville, AL 35812, (3)Department of Chemical Engineering, Vanderbilt University, VU Station B 351604, 2301 Vanderbilt Place, Nashville, TN 37235-1604 |
Axial Dispersion And The Danckwerts Boundary Conditions
Stefano Brandani, School of Engineering and Electronics, University of Edinburgh, Sanderson Building, The King's Buildings, EH9 3JL, Edinburgh, United Kingdom |
| Concluding Remarks |
|