The Geometry of Separation Boundaries: Four-Component Mixtures
|
Design Procedure For Integrated Reaction And Distillation
Jae W. Lee, Department of Chemical Engineering, The City College of New York, 140th street and Convent Ave, New York, NY 10031 and James Chin, Chem. Eng., Department of Chemical Engineering, The City College of New York, 140th street and Convent Ave, New York, NY 10031 |
Simulation Studies Of Stabilizing Polymers Within Peptide Drug Formulations
Jonathan Ashley1, Sarah M. Shulda2, Elizabeth M. Topp3 and Kyle V. Camarda2, (1)Chemical & Petroleum Engineering, University of Kansas, 1530 West 15th Street, 4132 Learned Hall, Lawrence, KS 66045, (2)Chemical & Petroleum Engineering, University of Kansas, 1530 West 15th Street, 4132 Learned Hall, Lawrence, KS 66045, (3)Pharmaceutical Chemistry, University of Kansas, 1530 West 15th Street, 4132 Learned Hall, Lawrence, KS 66045 |
Conditional And Absolute Formation Of Crystals With Needle Morhpology
Jacob P. Sizemore and Michael F. Doherty, University of California Santa Barbara, Department of Chemical Engineering, Santa Barbara, CA 93106 |
Determination of Minimum Vapor Flow Rate Regions for Petlyuk System Using a Simple Pre-Fractionator Model
Nelly Ramírez1, Angel Castro1 and Arturo Jiménez2, (1)Facultad de Ciencias Básicas, Ingeniería y Tecnología, Universidad Autónoma de Tlaxcala, Calzada Apizaquito s/n, Apizaco, Tlax., Mexico, (2)Departamento de Ingeniería Química, Instituto Tecnológico de Celaya, Av. Tecnológico y A.García Cubas S/N, Celaya, Gto., Mexico |
On The Systematic Extraction Of Knowledge In Process Synthesis And Chemical Process Design
Antonis C. Kokossis, Process & Information Systems Engineering, University of Surrey, Process & Information Systems Engineering, School of Engineering, Guildford, Surrey GU2 7XH, UK, Claudia Labrador-Darder, Process & Information Systems Engineering, University of Surrey, Process & Information Systems Engineering, School of Engineering, Guildford, GU2 7XH and Patrick Linke, Centre for Process & Information Systems Engineering, University of Surrey, Process & Information Systems Engineering, School of Engineering, Guildford, GU2 7XH |
Process Synthesis and the Question of Reversibility: A Graphical Approach Based on Thermodynamics
Madumetja J. Mosoma, Diane Hildebrandt and David Glasser, COMPS, School of Chemical and Metallurgical Engineering, Wits University, Private Bag x3, PO Wits, Johannesburg, 2050, Johannesburg, 2050, South Africa |
Property Clustering Techniques for Mixture Design
Charles C. Solvason, Department of Chemical Engineering, Auburn University, 132 Ross Hall, Auburn University, AL 36849-5127, Nishanth Chemmangattuvalappil, Department of Chemical Engineering, Auburn University, 132 Ross Hall, Auburn, AL 36849-5127 and Mario R. Eden, Auburn University, Department of Chemical Engineering, 222 Ross Hall, Auburn University, AL 36849-5127 |
Prediction of Thermal Cracking of Hydrocarbon Feedstocks in Feed System of Syngas Reformers
Guotai Zhang and Sanjeev Sekhri, Process, Technip USA Inc., 555 West Arrow Highway, Claremont, CA 91771-4805 |
Consumer Preferences and Pricing Models in the Design of Devices
Miguel J. Bagajewicz1, Blake Ashcraft2 and Jennifer Swenton2, (1)Chemical, Biological and Materials Engineering, University of Oklahoma, 100 E. Boyd St., T-335, Norman, OK 73019, (2)CBME, University of Oklahoma, 100 E. Boyd St., T-335, Norman, OK 73019 |
Optimal Design And Operation Of A Draft Tube Spouted Fluidized Bed Reactor For A Photocatalytic Process
David M. Follansbee1, Lealon L. Martin1 and John Paccione2, (1)Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, 110 8th st, Troy, NY 12180, (2)Environmental Health Sciences, SUNY at Albany, School of Public Health, 547 River Street, Flanigan Square, Troy, NY 12180 |
A Discretized Approach to Design Multicomponent Water/ Wastewater Network Systems
Miguel J. Bagajewicz, Chemical, Biological and Materials Engineering, University of Oklahoma, 100 E. Boyd St., T-335, Norman, OK 73019 and Debora C. Faria, School of Chemical Engineering and Material Science, University of Oklahoma, 100 East Boyd Street, T-133, Norman, OK 73019-0628 |
Optwatnet- A Software For The Optimal Design Of Industrial Water Networks
João Teles, Pedro Castro and Augusto Q. Novais, Department of Process Modeling and Simulation, INETI, Lisbon, Portugal |
Further Development Of A Design Algorithm For Petlyuk Columns Using A Process Simulator
A. Alarcón-García1, L. G. Ríos-Casas1 and J. L. Figueroa-Rodriguez2, (1)Chemical and Food Engineering Department, Universidad de las Americas, Puebla, Mexico, Ex-hda Sta. Catarina Martir, Sn. Andres Cholula, 72820, Mexico, (2)Chemical and Food Engineering Department, Universidad de las Americas,Puebla,Mexico, Ex-hda Sta. Catarina Martir, Sn. Andres Cholula, 72820, Mexico |
Molecular Design Using Enhanced Property Clustering Techniques
Nishanth Chemmangattuvalappil, Department of Chemical Engineering, Auburn University, 132 Ross Hall, Auburn, AL 36849-5127, Charles C. Solvason, Department of Chemical Engineering, Auburn University, 132 Ross Hall, Auburn University, AL 36849-5127 and Mario R. Eden, Auburn University, Department of Chemical Engineering, 222 Ross Hall, Auburn University, AL 36849-5127 |
Minlp Synthesis of Cooling Networks Including Capital and Operating Costs
José M. Ponce1, Medardo Serna2 and Arturo Jiménez1, (1)Departamento de Ingeniería Química, Instituto Tecnológico de Celaya, Av. Tecnológico y A.García Cubas S/N, Celaya, Gto., Mexico, (2)Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Mich, Mexico |
Rigorous Mathematical Programming Techniques for Targeted Macromolecule Delivery to the Brain
Mahadevabharath R. Somayaji, Chemical Engineering, University of Illinois at Chicago, 810 S. Clinton St., Chicago, IL 60607, Libin Zhang, Bioengineering, University of Illinois at Chicago, 851 S Morgan St, Chicago, IL 60607, Michalis Xenos, Chemical Engineering & Bioengineering, University of Illinois at Chicago, 810 S. Clinton St., Chicago, IL 60607 and Andreas A. Linninger, Bioengineering, University of Illinois at Chicago, 851 S. Morgan St., Room 218, Chicago, IL 60607 |
Price-Targeting through Repeated Flowsheet Re-Synthesis in Developing Novel Processing Equipment
L. T. Fan1, Tengyan Zhang1, Jiahong Liu1, Paul A. Seib Seib2, Ferenc Friedler3 and Botond Bertok3, (1)Department of Chemical Engineering, Kansas State University, 1005 Durland Hall, Manhattan, KS 66506, (2)Department of Grain Science and Industry, Kansas State University, 1005 Durland Hall, Manhattan, KS 66506, (3)Department of Computer Science, University of Pannonia, Egyetem u. 10., Veszprém, H-8200, Hungary |
Multivariate Linear Regression As A Tool In Modeling The Kinetics Of Complex Chemical Reactions
Foteini Makrydaki, Chemical and Biological Engineering, Tufts University, Science and Technology Center, 4 Colby Str., Medford, MA 02155 and Christos Georgakis, Department of Chemical and Biological Engineering, Tufts University, Science and Technology Center, 4 Colby Street, Medford, MA 02155 |
|