Preliminary Program subject to change
T2009 Prof. Jost O.L. Wendt Honorary Session - Oxycombustion of Coal I
OverviewOxy-combustion (OC) of coal refers to using oxygen-enriched air as the oxidant. Compared to combustion with air, OC coupled with staged combustion, intrinsically reduces NOx emissions, and the elimination of nitrogen from the combustion air produces a CO2-rich, sequestration-ready flue gas. We look forward to a stimulating forum for promoting the advancement of OC technologies and invite your participation as a speaker to address the science and engineering opportunities to deploy OC technology into the Nation's power production portfolio. Contributions are invited in the Focus Areas listed below. 1. Recent results on oxycombustion of coal and other solid fuels 2. Burner redesign and retrofit options for oxyfiring of coal 3. Ignition, devolatilization and pollutant formation mechanisms during OC of coal 4. Kinetic and CFD Modeling of OC processes 5. Engineering options for retrofitting existing fleet and cost issues 6. New OC boiler design – materials and engineering challenges
Primary SponsorTopical 2: New Frontiers in Energy Research (T2)

Chair

Arun C. Bose
National Energy Technology Laboratory, U.S. Department of Energy
P.O. Box 10940
Pittsburgh, PA 15236
Phone Number: 412-386-4467
Email: arun.bose@netl.doe.gov

CoChair

Eric G. Eddings
Associate Professor
Dept. of Chemical Engineering
University of Utah
50 So. Central Campus Drive
3290 MEB
Salt Lake City, UT 84112-9203
Phone Number: 801-585-3931
Fax Number: 801-585-9291
Email: eric.eddings@utah.edu
Oxycombustion Of Coal-Needs, Opportunities, And Challenges
Jost O.L. Wendt, Department of Chemical Engineering & Institute for Clean and Secure Energy, University of Utah, 3290 MEB, 50 S. Central Campus Dr., Salt Lake City, UT 84112
Non-Cryogenic Oxygen Production Technology Using Ion-Transport Membranes
Arun C. Bose, National Energy Technology Laboratory, U.S. Department of Energy, P.O. Box 10940, Pittsburgh, PA 15236 and Phillip A. Armstrong, Air Products and Chemicals, Inc, 7201 Hamilton Boulevard, Allentown, PA 18195
State of the Art of Oxy-Coal Combustion Technology for CO2 Control from Coal-Fired Boilers, “Are We Ready for Commercial Installation?”
Rajani Varagani1, Pavol Pranda2, Florian Gautier1, Jean-Pierre Tranier3, Nicolas Perrin4, Hamid Farzan5, Stanley J. Vecci5, Dennis K. McDonald5 and Kevin J. McCauley5, (1)American Air Liquide, 200 GBC Drive, Newark, DE 19702, (2)Combustion, American Air Liquide, 200 GBC Drive, Newark, DE 19702, (3)Development and Innovation, Air Liquide, 57, avenue Carnot BP 313, Champigny-sur-Marne, F-94503, France, (4)Energy Conversion Market, Air Liquide, 75 quai d'Orsay, Paris, 75007, France, (5)The Babcock & Wilcox Company, 180 South Van Buren Avenue, Barberton, 44203
Oxycoal Combustion: Opportunities and Challenges - Purification of Oxyfuel-Derived CO2
Kevin B. Fogash, Tonnage Gases, Equipment and Energy - Technology, Air Products and Chemicals, Inc., 7201 Hamilton Blvd, Allentown, PA 18195-1501 and Vince White, Tonnage Gases, Equipment and Energy - Technology, Air Products PLC, Hersham Place, Molesey Road, Walton-on-Thames, KT12 4RZ, United Kingdom
Oxy-Coal Combustion For CO2 Control
Lawrence Bool III, Industrial Applications and Healthcare R&D, Praxair Inc, 175 E Park Drive, Tonawanda, NY 14052, Bart VanHassel, Membranes R&D, Praxair Inc, 175 E Park Drive, Tonawanda, NY 14052 and Minish Shah, R&D, Praxair Inc, 175 E Park Drive, Tonawanda, NY 14052

Topical 2: New Frontiers in Energy Research