Nanofiber Production Via Melt Blowing
Christopher J. Ellison, Alhad Phatak, Christopher W. Macosko and Frank S. Bates, Dept. of Chemical Engineering and Materials Science, University of Minnesota, 421 Washington Ave SE, Minneapolis, MN 55455 |
Modeling Of Multifilament Fiber Melt-Spinning
Young-Pyo Jeon, Center for Advanced Engineering Fibers and Films, Clemson University, 301 Rhodes, Box 340910, Clemson University, Clemson, SC 29634-0910 and Christopher L. Cox, Clemson University, 224 Martin Hall, Clemson, SC 29634 |
Voltage Induced Transitions in the Dynamics of a Viscoelastic Jet in Electrospinning
Pradipto K. Bhattacharyya, Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, G. C. Rutledge, Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 and G. H. McKinley, Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 |
Flow-Induced Crystallization Of Polypropylene-Clay Nanocomposites
Mark A. Treece and James P. Oberhauser, Department of Chemical Engineering, University of Virginia, 102 Engineer's Way, Box 400741, Charlottesville, VA 22904-4741 |
Rheology Of Supercritical CO2-Based Dispersed Polymer-Clay Nanocomposites
Mihai Manitiu, Chemical Engineering, Wayne State University, 5050 Anthony Wayne Drive, Detroit, MI 48202, Steven E. Horsch, nanoScience Engineering Corporation, Detroit, MI 48202, Rangaramanujam M. Kannan, Wayne State University, 5050 Anthony Wayne Drive, Detroit, MI 48202 and Esin Gulari, Clemson University, Clemson, SC |
Effct of Mixing TYPE on Rheological Behavior, Microstructure, and Mechanical Properties of Pp/clay Nanocomposite
Guo Jiang, Center for Polymer Processing Equipment and Intellectualization, College of Industrial Equipment and Control Engineering,South China University of Technology, Guangzhou, China and Han-Xiong Huang, Center of Polymer Processing Equipment and Intellectualization, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, China |
|