Preliminary Program subject to change
12F01 Advances in Process Intensification II
OverviewPart two of Process Intensification Fall Programming.
Primary SponsorProcess Intensification (12f)

Chair

Laurence R. Weatherley
Professor and Chair
Department of Chemical and Petroluem Engineering
The University of Kansas
Learned Hall
1530 W 15th Street
Lawrence, KS 66045
Phone Number: 785-864-3553
Fax Number: 785-864-4967
Email: lweather@ku.edu
Process Intensification In Synthesis Of Methyl Acetate
Gregor Demel, Chemical engineering and environmental science, University of Technology Graz, Inffeldgasse 25/c/II, Graz, 8010, Austria, M. Siebenhofer, University of Technology Graz, Department of Chemical Engineering and Environmental Technology, Inffeldgasse 25/C/II, Graz, 8010, Austria and Rolf Marr, Department of Chemical Engineering and Environmental Technology, Graz University of Technology, Inffeldgasse 25/C/II, Graz, A-8010, Austria
Theoretical Investigation Of Monomer Consumption In Photopolymerization Using Non-Photobleaching Initiator
Venkata Nekkanti, Process Intensification & Clean Technology (PICT) Group, Department of Chemical and Biomolecular Engineering, Clarkson University, Potsdam, NY 13699, Roshan J. J. Jachuck, Process Intensifcation & Clean Technology (PICT) Group, Department of Chemical and Biomolecular Engineering, Clarkson University, PO Box 5705, Potsdam, NY 13699 and Lawrence, M Glasser, for Quantum Device Technology & Department of Physics, Clarkson University, Potsdam, NY 13699
Intensified Biodiesel Reaction Using Continuous Rotating Tube Reactor Technology
Himanshu Lodha, Chemical Engineering Department, Clarkson University, 8 Clarkson Avenue, P.O. Box 5707, Potsdam, NY 13699 and Roshan J.J. Jachuck, Process Intensification & Clean Technology (PICT) Group, Department of Chemical Engineering, Clarkson University, PO Box: 5705, Potsdam, NY 13699
Fermentation of Glucose into Ethanol by Using An Intensified Reactor
Manognya Billuri, Chemical & Biomolecular Engineering, Clarkson University, 8 clarkson avenue ,PO Box 5707, Potsdam, NY 13699 and Roshan JJ Jachuck, Chemical and Biomolecular Engineering, Clarkson University, 8 clarkson avenue ,PO Box 5707, Potsdam, NY 13699
Application of Plackett Burman Design and Response Surface Methodology for Optimizing Grinding Kinetics of Dolomite with and without Grinding Aid
Asha Immanuel Raju Chaduvula1, Murali Yugandhar Nikku2, Kiran Kumar Nalla2, Srinivasa Babji Josyula2, Jagannadha Rao Patruni2 and Sambi Reddy Bhimavarapu2, (1)Chemical Engineering, Andhra University, Andhra University, Visakhapatnam - 530 003, AP, INDIA, Visakhapatnam, 530003, India, (2)Chemical Engineering Department, Andhra University, Andhra University, Visakhapatnam - 530 003, AP, INDIA, Visakhapatnam, 530003, India
Micromixer Characterization with the Consecutive-Competitive Bromination of 1,3,5-Trimethoxybenzene: Experimental Procedure and Comparison to Other Mixing-Sensitive Reactions
Kristin J. Hecht, Department of Chemical Engineering, University of Utah, 50 South Central Campus Drive, Salt Lake City, UT 84112, Andreas Kölbl, Institute for Micro Process Engineering (IMVT), Forschungszentrum Karlsruhe GmbH, Hermann-von-Helmholtz Platz 1, 76344 Eggenstein-Leopoldshafen, Germany, Manfred Kraut, Institute for Micro Process Engineering (IMVT), Forschungszentrum Karlsruhe GmbH, Hermann-von-Helmholtz Platz 1, 76344 Eggenstein-Leopoldshafen, Germany and Klaus Schubert, Institute for Micro Process Engineering (IMVT), Forschungszentrum Karlsruhe GmbH,, Hermann-von-Helmholtz Platz 1, Eggenstein-Leopoldshafen, D-76344, Germany

Process Development Division