Preliminary Program subject to change
17003 Renewable Fiber Processes:
OverviewThis session will deal with engineering of renewable fiber processes in the forest products industry. It will include recycling operations and other fiber processes such as papermaking, pulping and bleaching.
Primary SponsorForest Products Division (17)
Co-Sponsor(s)Sustainable Engineering Forum (23)

Chair

Steve R. Duke
Associate Professor
Chemical Engineering
Auburn University
232 Ross Hall
Auburn, AL 36849-5127
Phone Number: 334-844-2087
Fax Number: 334-844-2063
Email: srduke@eng.auburn.edu

CoChair

Dewei Qi
Associate Professor
Western MichiganUniversity
Parkview Campus A227,PCI
Kalamazoo, MI 49008
Phone Number: 269 2763523
Fax Number: 269 276 3501
Email: dewei.qi@wmich.edu
Modelling and Optimization of Washing Plant of A Paper Mill
Amiya K. Ray, Department of Paper Technology, Indian Institute of Technology Roorkee, Roorkee,India, Paper Mill Road, Saharanpur, India
Modeling H Factor-Kappa Number for Kraft Pulping of Lantana Camara Plant- An Experimental Investigation
Amiya K. Ray and Manish K. Puri, Department of Paper Technology, Indian Institute of Technology Roorkee, Roorkee,India, Paper Mill Road, Saharanpur, India
Hot-Water Extraction Of Aspen Woodchips
Shijie Liu, Yang Wang and Thomas E. Amidon, SUNY College of Environmental Science and Forestry, 1 Forestry Drive, Syracuse, NY 13210
New Pretreatment Method For Biofuels Production From Lignocellulosic Biomass
Yulin Deng, School of chemical and bio-molecular Engineering, Georgia Institute of Technology, 500, 10th st. N.W., Atlanta, GA 30332 and Yulin Zhao, Georgia Institute of Technology, 500, 10th st. N.W., Atlanta, GA 30332
Increasing The Economic Efficiency Of Feedstock Used For Greenhouse Heating
Monty Singletary, Dave C. Swalm School of Chemical Engineering, Mississippi State University, Mississippi State, MS 39762 and Mark Bricka, Dave C. Swalm School of Chemical Engineering, Mississippi State University, MS 9595, Mississippi State, MS 39762

Forest Products Division