Preliminary Program subject to change
T7004 Fuel Cell Membranes II
OverviewThis symposium will focus on materials and durability challenges in polymer electrolyte fuel cell (PEFC) membranes. The use of PEFCs in automobiles, distributed stationary power and portable applications in the electronics sector and for military use has been envisioned. However, for most applications, key membrane material related challenges remain. The objective of this symposium is to explore recent advances made in these areas. The organizers invite papers on the following topics: 1) Novel polymer electrolyte membranes for PEFCs and DMFCs; 2) membranes designed to operate at low relative humidities; 3) membrane durability under constant and cyclic loads
Primary SponsorTopical 7: Polymers for Energy Applications (T7)

Chair

James M. Fenton
Mechanical, Materials, and Aerospace Engineering
University of Central Florida
Florida Solar Energy Center
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone Number: 321-638-1002
Fax Number: 321-638-1010
Email: jfenton@fsec.ucf.edu

CoChair

Vijay Ramani
Chemical Engineering
Illinois Institute of Technology
3300 South Federal Street
Chicago, IL 60616-3793
Phone Number: 312-567-3064
Fax Number: 312-567-8874
Email: ramani@iit.edu
New Membrane Morphologies for Pem Fuel Cells
Peter N. Pintauro, Ryszard Wycisk and Jun Lin, Case Western Reserve University, Department of Chemical Engineering, Cleveland, OH 44106-7217
Multilayer Proton Exchange Membranes for Direct Methanol Fuel Cells
J. Nathan Ashcraft1, Avni A. Argun1 and Paula T. Hammond2, (1)Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 66-525, Cambridge, MA 02139, (2)Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 66-546, Cambridge, MA 02139
Effects of Membrane Preparation and Treatment on Transport Properties in Recast Nafion® Membranes
Nicholas W. DeLuca and Yossef A. Elabd, Chemical and Biological Engineering, Drexel University, 3141 Chestnut Street,, Philadelphia, PA 19104
New Sulfonated Copolymer-Based Membranes for High Temperature Proton-Exchange Membrane Fuel Cells
He Bai and W.S. Winston Ho, Department of Chemical and Biomolecular Engineering, The Ohio State University, 125A Koffolt Labs, 140 West 19th Avenue, Columbus, OH 43210-1180
Tailoring the Structure of Composite Proton Conducting Membranes through Applied Electric Fields
Dongxia Liu1, Xue Wei1 and Matt Yates2, (1)Chemical Engineering, University of Rochester, Rochester, NY 14627, (2)University of Rochester, Department of Chemical Engineering, 206 Gavett Hall, Rochester, NY 14627
High-Throughput Water Uptake Characterization of Proton Exchange Membranes
Keith Reed, ChBE, GeorgiaTech, 311 ferst dr NW, Atlanta, GA 30332 and Carson Meredith, Georgia Institute of Technology, 778 Atlantic Dr., Atlanta, GA 30332-0100
Surface Energy Characterization of Gdls and Ionomer Membranes Using Inverse Gas Chromatography at Different Relative Humidity Conditions
Daniel J. Burnett1, David Wood2 and Y Kim2, (1)Surface Measurement Systems, 2222 South 12th Street, Suite D, Allentown, PA 18103, (2)Los Alamos National Laboratory, Los Alamos, NM 87545

Topical 7: Polymers for Energy Applications