Session: Poster Session in Fluid Mechanics (2009 Annual Meeting)

Description:

This session of contributed posters will include a broad range of recent results in the areas of fundamental and applied fluid mechanics.

Sponsor:

Fluid Mechanics

Chair:

Anne M. Grillet
Principal Member of Technical Staff
Sandia National Laboratories
Microscale Science and Technology
P.O. Box 5800, MS 0346
Albuquerque, NM 87185-0346
Phone Number: 505-844-7453
Email: amgrill@sandia.gov

Co-Chair:

Subramanian Ramakrishnan

Papers:

232a

Droplet Motion in a Microfluidic Channel with a Constriction
Moon Soo Lee, University of Maryland; Panagiotis Dimitrakopoulos, University of Maryland

232b

The Emptying of Liquid From Gravure Cells
Shawn Dodds, University of Minnesota; Satish Kumar, University of Minnesota

232c

Using the Level Set Method to Model Droplet Motion through An Ambient Miscible Fluid
Ileana Carpen, Tennessee Technological University; Manohar Gottapu, Tennessee Technological University

232d

Hydrophobicity Effect On Gas-Liquid Mass Transfer in Microchannels
Gengzhi Yu, University of Washington; Amy Shen, University of Washington; Anthony Lawrenz, University of Washington

232e

Gas Hold-up Profiles Investigation in Ionic Liquid Column
Haifeng Dong, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences; Lidong Zhao, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences; Lu Liu, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences; Xiaoling Wang, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences; Xiangping Zhang, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences; Suojiang Zhang, State Key Lab of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences

232f

Effect of Confinement-Geometry On the Suspension-Rheology and the Pressure-Drop Inside a Conduit
Shahin Navardi, Texas Tech University; Sukalyan Bhattacharya, Texas Tech University

232g

Particle Migration and Torque Evolution in Oscillatory Torsional Flows of Concentrated Suspensions
Kapil V. Deshpande, Rutgers University; Nina C. Shapley, Rutgers University

232h

Gel Formation and Aging in Concentrated Nanoparticle Suspensions
Subramanian Ramakrishnan, Florida A&M University - Florida State University; Robert L. Leheny, Johns Hopkins University; Hongyu Guo, Johns Hopkins University; James Harden, University of Ottawa

232i

Analysis of Structures Formed by Application of Step Strain to Dense Colloidal Suspensions
Laura T. Shereda, University of Michigan, Ann Arbor; Ronald G Larson, University of Michigan, Ann Arbor; Michael J. Solomon, University of Michigan, Ann Arbor

232j

Orientational Ordering in Colloidal Rods by Sedimentation and Centrifugation
Deshpremy Mukhija, University of Michigan; Aayush A. Shah, University of Michigan; Michael J. Solomon, University of Michigan

232k

Migration Mechanisms for Rigid Polymers and Nanorods Sheared at High Peclet Number
Joontaek Park, University of Florida; Jason E. Butler, University of Florida

232l

Using Rheo-SALS to Study Shear Induced Phase Separation (SIPS) in Aqueous Solutions of Cationic Surfactant and Salt
Prachi Thareja, University of Delaware; Ingo Hoffmann, Institut für Chemie Technische Universität Berlin; Matthew E. Helgeson, University of Delaware; Matthew W. Liberatore, Colorado School of Mines; Michael Gradzielski, Institut für Chemie Technische Universität Berlin; Norman J. Wagner, University of Delaware

232m

Direct Comparison of the Static and Dynamic Properties of a Semi-Flexible Polymer Calculated Using Lattice-Boltzmann and Brownian Dynamics Simulations
A.J.C Ladd, University of Florida; Rahul Kekre, University of Florida; Jason E. Butler, University of Florida

232n

Hemodynamic Forces Exerted On Moving and Adherent Leukocytes in Post-Capillary Blood Vessels
Shugi Kuriakose, University of Maryland; Panagiotis Dimitrakopoulos, University of Maryland

232o

Effects of Velocity Structure On Turbulent Heat Transfer From the Wall
Anjani Kalyan Karna, The University of Oklahoma; Dimitrios V. Papavassiliou, University of Oklahoma

232p

Two Different Heat Transfer Asymptotes and Interplay of Elasticity and Inertia in Heat Transfer Enhancement in Laminar Flow in Straight Non-Circular Tubes
Dennis A. Siginer, Petroleum Institute; Mario F. Letelier, Universidad de Santiago de Chile

232r

A Model of HfO2 Chemical Vapor Deposition Chemistry and Fluid Mechanics On H-Si Surfaces
Kejing Li, University of Alabama; Elizabeth Moore, National Institute of Standards and Technology; Lin Zhang, Harbin Institute of Technology; William Kimes, National Institute of Standards and Technology; Tonya Klein, University of Alabama

232s

Modeling of Aggregation and Breakup of Colloidal Particles in a Turbulent Stirred Tank through a Multizonal PBE Model
Matthäus U. Bäbler, Institute of Process Engineering, ETH Zurich; Marco Mazzotti, Institute of Process Engineering, ETH Zurich; Miroslav Soos, Institute for Chemical and Bioengineering, ETH Zurich; Massimo Morbidelli, Institute for Chemical and Bioengineering, ETH Zurich

232t

Deep Electrochemical Etching of Silicon
Joel Nino G. Bugayong, Louisiana State University; Purnima Narayanan, Louisiana State University

See more of this Group/Topical: Engineering Sciences and Fundamentals

<< Previous Session | Next Session >>