Session: Poster Session: Materials Science and Engineering Division (2009 Annual Meeting)

Description:

Poster session for the entire division.

Sponsor:

Materials Engineering and Sciences Division

Chair:

Ahmed E. Ismail
Senior Member of Technical Staff
Sandia National Laboratories
Performance Assessment and Decisions Analysis Department
4100 National Parks Hwy
Carlsbad, NM 88220
Phone Number: 505-845-2117
Email: aei@alum.mit.edu

Co-Chair:

Thomas H. Epps III

Papers:

488a

Surface-Initiated Polyhomologation to Prepare Superhydrophobic Films
Juan C. Tuberquia, Vanderbilt University; G. Kane Jennings, Vanderbilt University

488aa

Isothermal Crystallization in the Nematic Phase of Poly(Trimethylene Terephthalate) Fibers by Molecular Dynamic Simulations
Min-Kang Hsieh, National Taiwan University; Shiang-Tai Lin, National Taiwan University

488ab

Synthesis, Characterization, and Kinetic Modeling of Renewable Bioplastics
Mathew D. Rowe, Mississippi State University; Keisha Walters, Mississippi State University

488ac

Carbon Filled Nylon 6,6 Composites Prepared by Simple Melt Compounding
Masuduz Zaman, University of New Brunswick; Felipe Chibante, University of New Brunswick

488ad

Flow-Induced Degradation of Corrosion Protective Coatings: A New Acceleration Factor for Testing
Yechun Wang, North Dakota State University; Gordon P. Bierwagen, North Dakota State University

488ae

Facile Preparation of Highly-Scattering Metal-Nanoparticle Coated Polystyrene Latex Beads and Their Optical Properties
Jung-Hyun Lee, Georgia Institute of Technology; Mahmoud A. Mahmoud, Georgia Institute of Technology; Valerie Sitterle, Georgia Tech Research Institute; Jeffrey Sitterle, Georgia Tech Research Institute; Carson Meredith, Georgia Institute of Technology

488af

Nanostructured PP-PE Polymer Composites From Catalytic Dehydrogenated Enhanced Propylene Production
Zoe Ziaka, ZIVATECH_ENGINEERING, DEI; Savvas Vasileiadis, ZIVATECH_ENGINEERING; Louiza Paraschopoulou, DEI

488ag

Surface Reaction Mechanism During Atomic Layer Deposition of Titanium Dioxide: A Comparative Study Using Ozone, Water and Oxygen Plasma as Oxidizers
Vikrant R. Rai, Colorado School of Mines; Sumit Agarwal, Colorado School of Mines

488ah

Visualization of Fiber Orientation IN Short Glass Fiber Thermoplastic COMPOSITES USING A Virtual Reality MODELING Language (VRML) Tool
Gregorio M. Velez-Garcia, Virginia Tech; Ronald Kriz, Virginia Tech; Peter Wapperom, Virginia Polytechnic Institute; Donald G. Baird, Virginia Tech

488ai

Novel Synthesis Method and Characterization of Nano-Complex Oxide (MFe₂O₄, M=Co, Mn, Ni, Zn) for Thermochemical Water-Splitting
Michael Opoku, South Dakota School of Mines and Technology; Lori Groven, South Dakota School of Mines and Technology; Rajesh Shende, South Dakota School of Mines and Technology; Jan Puszynski, South Dakota School of Mines and Technology; Rahul Bhosale, South Dakota School of Mines and Technology

488aj

Microstructure Changes of RBSC in Boiling Sulfuric Acid Solutions
Choong Hwan Jung, Korea Atomic Energy Research Institute; Myung-Hoon Jeong, Korea Atomic Energy Research Institute; Ji-Yeon Park, Korea Atomic Energy Research Institute

488ak

Gold Island Film Patterning Via Selective Electroless Plating On Vapor-Deposited Silane Monolayers
Wonmi Ahn, University of Utah; D. Keith Roper, University of Arkansas

488al

Tritium Effects On Electrically Conducting Polymers for Sensor Applications
Marie C. Kane, Savannah River National Laboratory; Elliot A. Clark, Savannah River National Laboratory; Robert J. Lascola, Savannah River National Laboratory

488b

Kinetic Monte Carlo Simulations to Predict and Design Explicit Monomer Sequence along Copolymer Chains
Lin Wang, Northwestern University; Linda J. Broadbelt, Northwestern University

488c

Covalently-Immobilized Cleavable Triblock Surfactants for Determination of Triblock Distribution
Karl Schilke, Oregon State University; Joe McGuire, Oregon State University; Jennifer Neff, Allvivo Vascular, Inc.

488d

Field-Effect Mobility Enhanced for the Organic Thin Film Transistors (OTFTs) On Flexible Substrate by Surface Modified with Organosilane
Lin Jiang, University of Illinois at Chicago; Christos Takoudis, University of Illinois at Chicago; Jie Zhang, Motorola; Dan Gamota, Motorola Inc.

488e

Photoresist Derived Carbon as a SubstratumFor Nerve Cell Culture
Ahsan Munir, Worcester Polytechnic Institute; H. Susan Zhou, Worcester Polytechnic Institute; Richard Pampuro, Worcester Polytechnic Institute; Chunwei Kuo, Worcester Polytechnic Institute

488f

Fabrication of Polymer-Graphite Nanocomposites Via Cryogenic Milling
Paul J. Hubert, Bucknell University; Katsuyuki Wakabayashi, Bucknell University

488h

Development of New Classes of Optical Materials Based On Dendrimer/Polymer Composites
Srihari K. Maganti, South Dakota School of Mines and Technology; David J. Dixon, South Dakota School of Mines and Technology; Jacek J. Swiatkiewicz, South Dakota School of Mines and Technology; Kyle W. Felling, University of Central Arkansas

488i

High Performance Impact-Tolerant and Abrasion-Resistant Materials: Lessons From Nature
Qianqian Wang, University of California, Riverside; James Weaver, University of California, Riverside; Ali Miserez, UC Santa Barbara; Anthony Tantuccio, The Cooper Union; Ryan Stromberg, Hysitron, Inc.; Richard Nay, Hysitron, Inc.; Krassimir N. Bozhilov, University of California, Riverside; Shinobu Heier, Thermo Fisher Scientific; Peter Maxwell, UC Santa Barbara; Elaine DiMasi, Brookhaven National Laboratory; David Kisailus, University of California, Riverside

488j

Heteropolymers with Adjustable Monomer Sequences (HAMS) as Compatibilizers for Homopolymer Blends
Ravish Malik, North Carolina State University; Carol K. Hall, North Carolina State University; Jan Genzer, North Carolina State University

488k

Amphiphilic Block Copolymer Self-Assembly in Solvent Mixtures: Solvent Quality Effects On Formation and Structure of Micelles and Lyotropic Liquid Crystals
Venkataramanan Ravi, University at Buffalo - The State University of New York (SUNY); Jinendra Lakshmichand, University at Buffalo - The State University of New York (SUNY); Biswajit Sarkar, University at Buffalo - The State University of New York (SUNY); Paschalis Alexandridis, University at Buffalo - The State University of New York (SUNY)

488l

Investigation of Glass-Rubber Relaxation Characteristics in Polymer Nanoparticle Composites
Anthony C. Comer, University of Kentucky; Douglass S. Kalika, University of Kentucky

488m

Stress-Strain Behavior of Smectic Main-Chain Polydomain Elastomers
Ronald C. Hedden, Texas Tech University; Harshad P. Patil, Penn State University; Daniel M. Lentz, Penn State University

488n

Synthesis of Tetrahydrofuran and Propylene Oxide Copolymer with Rich Primary Hydroxyls
Zhiqiang He, School of Chemical and Material Engineering, Jiangnan University; Yun Fang, School of Chemical and Material Engineering, Jiangnan University

488o

Liquid Water Transport in Polylactide Using Time-Resolved FTIR-ATR Spectroscopy
Eric M. Davis, Drexel University; Grayce Theryo, University of Minnesota; Marc A. Hillmyer, University of Minnesota; Richard A. Cairncross, Drexel University; Yossef A. Elabd, Drexel University

488p

Synthesis and Characterization of Temperature-Responsive Poly(ethylene glycol) -Based Hydrogel Nanocomposites
Samantha A. Meenach, University of Kentucky; Kimberly W. Anderson, University of Kentucky; J. Zach Hilt, University of Kentucky

488q

Anionic Thermo-Responsive Polymer with High Adsorption Capacity for Heavy Metal Removal
Kentaro Mizoguchi, Soka University; Junichi Ida, Soka University; Tatsushi Matsuyama, Soka University; Hideo Yamamoto, Soka University

488r

Preparation of Intelligent Microcapsules with Stimuli-Responsive Polymer
Masanori Ochi, Soka University; Junichi Ida, Soka University; Tatsushi Matsuyama, Soka University; Hideo Yamamoto, Soka University

488s

In Vitro Skin Permeation of Cubosomes Containing Water Soluble Extracts of Barberry
Teak Kwan Kwon, Kangwon National University; Mi Kyung Kang, Kangwon National University; Mi Sun Lee, Kangwon National University; Jin Chul Kim, Kangwon National University

488t

Preparation, Characterization and in Vitro Skin Permeation of Solid Lipid Nanoparticle(SLN) Coating with Silk Protein
Teak Kwan Kwon, Kangwon National University; Mi Kyung Kang, Kangwon National University; Jin Chul Kim, Kangwon National University

488u

Polyether Polyol Derivatives as New Bioconjugate Carriers
Zhongyu Li, The Hong Kong University of Science and Technology; Ying Chau, The Hong Kong University of Science and Technology

488v

Mixing During Scale up of Admicellar Polymerization for Textiles
Srinivas Hanumansetty, University of Oklahoma; Pratik Kothary, University of Oklahoma; Edgar A. O'Rear, University of Oklahoma

488w

Adsorption Behavior of Model Proteins On Surfaces From Mesoscale Simulations
Kristin Patterson, Pennsylvania State University; Martin Lisal, Academy of Sciences of the Czech Republic; Coray M. Colina, Pennsylvania State University

488x

Particle Surface Modification by Coating Ultra-Thin Microporous/Mesorporous Films
Xinhua Liang, University of Colorado; Miao Yu, University of Colorado at Boulder; Alan W. Weimer, University of Colorado

488y

Quantification of Molecular Topology Using SANS
Gregory Beaucage, Department of Chemical and Materials Engineering; Ramnath Ramachandran, Department of Chemical and Materials Engineering

See more of this Group/Topical: Materials Engineering and Sciences Division

<< Previous Session | Next Session >>