Session: Integrated Processes for Biochemical Conversion of Renewable Feedstocks to Fuels and Chemicals I (2010 Annual Meeting)

Description:

Papers should focus on integrating multiple unit operations for bio-refining and conversion of renewable feedstocks to fuels and chemicals, especially in regards to opportunities for enhancing process efficiencies. Emphasis will be given to papers relying on experimental data applied in combination with fundamental engineering principals. Examples could include: combining pretreatment and hydrolysis, heat recycle between pretreatment and distillation processes, developing water recycle schemes, and integrated co-fermentation and product recovery.

Sponsor:

Sustainable Biorefineries

Co-Sponsor(s):

Transport Processes (01d), Bioengineering (15c), Sustainable Engineering Forum (23), Research and New Technology Committee (18j)

Chair:

Nathan S. Mosier
Assistant Professor
Purdue University
Agricultural and Biological Engineering & Laboratory of Renewable Resources Engineering (LORRE)
Potter Engineering Center
West Lafayette, IN 47907-2022
Phone Number: 765-494-7025
Fax Number: 765-494-7023
Email: mosiern@purdue.edu

Co-Chair:

Katherine A. Taconi
Assistant Professor
University of Alabama in Huntsville
130 Engineering Building
Huntsville, AL 35899
Phone Number: 2568243595
Email: taconik@email.uah.edu

Papers:

226a

Process Technology Evaluation for Lignocellulosic Bioethanol Production: Plantwide Configurations Using a Dynamic Modeling Approach
Ricardo Morales-Rodríguez, Technical University of Denmark; Anne S. Meyer, Technical University of Denmark; Krist V. Gernaey, Technical University of Denmark (DTU); Gürkan Sin, Technical University of Denmark

226b

Comparison of One and Two Step Methods for Producing Jet Fuel Building Blocks From Cellulosic Biomass: Hemicellulose Release and Levulinic Acid Production From Maple Wood
Taiying Zhang, University of California, Riverside; Jian Shi, University of California, Riverside; Charles Wyman, University of California, Riverside

226c

Sensitivity and Uncertainty Analysis of Updated Corn Stover to Ethanol Process Design and Economic Models
Ling Tao, National Renewable Energy Laboratory; David Humbird, National Renewable Energy Laboratory; Andy Aden, National Renewable Energy Laboratory; Eric C. D. Tan, National Renewable Energy Laboratory

226d

Two-Stage Gas Stripping Recovery Process for Enhanced Butanol Production in Acetone-Butanol-Ethanol Fermentation by Clostridium Beijerinckii
Chuang Xue, Ohio State University; Shang-Tian Yang, The Ohio State University

226e

Exploring Three Pathways to Convert a Hemi-Cellulose Rich Pre-Pulping Extract Into Long-Chain Alcohols Via the MixAlco™ Process
Abigail S. Engelberth, University of Maine; M. Clayton Wheeler, University of Maine; G. Peter van Walsum, University of Maine

226f

Optimizing a Separate Hemicellulosic and Cellulosic Conversion Process Design for Producing Ethanol
Alexandre Chapeaux, National Renewable Energy Laboratory; Nancy Dowe, National Renewable Energy Laboratory; Daniel J. Schell, National Renewable Energy Laboratory

See more of this Group/Topical: Sustainable Engineering Forum

<< Previous Session | Next Session >>