Session: Materials for Batteries, Capacitors, and Energy Storage I (2012 Annual Meeting)

Description:

This session will cover advances in energy storage devices including batteries and capacitors. Of particular interest are studies dealing with the synthesis and processing of new active materials or, the characterization of material and cell performance.

Sponsor:

Electronics and Photonics

Co-Sponsor(s):

ICE2012: Alternative Energy & Enabling Technologies (T4E)

Chair:

Matthew J. Panzer
Assistant Professor
Tufts University
Chemical & Biological Engineering
4 Colby St.
Medford, MA 02155
Phone Number: 617-627-4633
Email: matthew.panzer@tufts.edu

Co-Chair:

Charles W. Monroe
Assistant Professor
University of Michigan
Department of Chemical Engineering
2300 Hayward St.
Ann Arbor, MI 48109
Phone Number: 734-647-4645
Email: cwmonroe@umich.edu

Papers:

503a

High Capacity Lithium Rich Metal Oxide Cathodes with Single Wall Carbon Nanotube Conductive Additives for Lithium Ion Batteries
Matthew J. Ganter, Rochester Institute of Technology; Reginald E. Rogers Jr., Rochester Institute of Technology; Roberta A. DiLeo, Rochester Institute of Technology; Olivia N. Matthew, Rochester Institute of Technology; Michael W. Forney, Rochester Institute of Technology; Jason W. Staub, Rochester Institute of Technology; Brian J. Landi, Rochester Institute of Technology

503b

Synthesis of Biorenewable C/Si/SiO2 As the Li-Ion Battery Anode Material
Zhengrong Gu, South Dakota State University; Hong Jin, South Dakota State University

503c

Nitride-Rich Silicon Anodes for Lithium Rechargeable Batteries
Rhet Joseph De Guzman, Wayne State University; Jinho Yang, Wayne State University; Mark Cheng, Wayne State University; Steven O. Salley, Wayne State University; K. Y. Simon Ng, Wayne State University

503d

Electrode Designs Incorporating Low Cost Carbon Fibers to Eliminate Inactive Components in Lithium Ion Battery Anodes
Wyatt Tenhaeff, Oak Ridge National Laboratory; Orlando Rios, Oak Ridge National Laboratory

Break

503e

Nanostructured and Amorphous Silicon Composites: Reversible High Capacity Lithium-Ion Anodes
Rigved Epur, University of Pittsburgh; Faith Beck, University of Pittsburgh; Moni Kanchan Datta, University of Pittsburgh; Ayyakkannu Manivannan, National Energy Technology Laboratory; Prashant Kumta, University of Pittsburgh

503f

Aqueous Based Cathode Slurries for Use in Three-Dimensional Lithium-Ion Batteries
Derek C. Johnson, Prieto Battery, Inc.; Matthew T. Rawls, Prieto Battery, Inc.; Amy L. Prieto, Colorado State University

503g

Electrochemical Characterization of Passivating Films in Lithium-Ion Batteries
Maureen Tang, UC Berkeley; John Newman, UC Berkeley

503h

Study of Transport Properties and Stress Analysis Using Macro and Atomistic Simulations for Lithium-Based Rechargeable Batteries
Utsav Kumar, IIT Kanpur; Atanu Metya, IIT Kanpur; Jayant K. Singh, Indian Institute of Technology, Kanpur

See more of this Group/Topical: Materials Engineering and Sciences Division

<< Previous Session | Next Session >>