341675 Algal Biorefinery: Production of Biocrude Oil & Byproducts

Thursday, November 7, 2013: 8:30 AM
Union Square 22 (Hilton)
Harvind Kumar Reddy1, Thinesh Selvaratnam2, Tapaswy Muppaneni1, Nagamany Nirmalakhandan2, Tanner Schaub3, Barry Dungen4, Nilusha Sudasinghe Appuhamilage5, Peter Lammers6, Wayne Voorhies7 and Shuguang Deng8, (1)Chemical Engineering, New Mexico State University, Las Cruces, NM, (2)Civil and Environmental Engineering, New Mexico State University, Las Cruces, NM, (3)College of Agricultural, Consumer and Environmental Sciences, New Mexico State University, Las Cruces, NM, (4)College of Agricultural, Consumer and Environmental Sciences, New Mexico State university, Las Cruces, NM, (5)Chemistry and Biochemistry, New Mexico State University, Las Crudes, NM, (6)Energy Research Laboratory, New Mexico State University, Las Cruces, NM, (7)Molecular biology, New Mexico State university, LAS CRUCES, NM, (8)Chemical Engineering Department, New Mexico State University, Las Cruces, NM

We have developed a strategy needed for the production of sustainable algal biofuels with hydrothermal liquefaction of three different algal species. Hydrothermal liquefaction experiments with 10% solid loading of Chlorella sp., Nannochloropsis sp., or Galdieria sp. were carried out between 180oC-300oC and 30 min. of reaction time to investigate the effects of HTL conditions on the important liquefaction reactions and final products. The liquid biocrude products were analyzed with GC-MS and FT-ICR for their chemical compositions, and micro bomb calorimeter for their high heating values. The composition of residual algal biomass was analyzed after each experimental run to identify the biochemical composition of the biomass. The residual water collected after liquefaction was also analyzed to quantify the nutrients and dissolved organic compounds in the water phase. This water phase produced in the HTL process was recycled for cultivation of galdieria sp. at different levels of dilution. An integrated processing strategy was developed for individual algal species based on the values of three products (bio-crudes, solid residues and water phase) obtained in the HTL process.

Extended Abstract: File Not Uploaded
See more of this Session: Sustainable Fuel from Renewable Resources
See more of this Group/Topical: Environmental Division