777 Polymers in Additive Manufacturing


Description:
This session will focus on the utilization of macromolecular systems in the emerging field of additive manufacturing. In particular, the session will focus on both experimental and computational efforts that utilize polymers in additive manufacturing. Contributions addressing all methods of polymer additive manufacturing, including fused deposition modeling, stereolithography, selective laser sintering, and direct write, are welcome. ***Note to faculty candidates: please include a note to the session chair during submission to alert them to your status***

Sponsor:
Polymers
Co-Sponsor(s):
Next-Gen Manufacturing (T6A)


Chair:
Amy M. Peterson
Assistant Professor
Worcester Polytechnic Institute
Chemical Engineering
100 Institute Road
Worcester, MA
01609
Email: ampeterson@wpi.edu

Co-Chair:
Blake Johnson
Assistant Professor
Virginia Tech
Industrial and Systems Engineering
Blacksburg, VA
Email: bnj@vt.edu


Papers:
777a
Tailored Polymers for Structural Application in Large-Scale Extrusion Systems
Blake Marshall, U.S. Department of Energy
777b
Modeling Flow Phenomena in Fused Filament Fabrication Geometry
Eric L. Gilmer, Virginia Polytechnic Institute and State University; Darren Miller, Virginia Polytechnic Institute and State University; Jacob Fallon, Virginia Polytechnic Institute and State University; Camden Chatham, Virginia Polytechnic Institute and State University; Callie Zawaski, Virginia Polytechnic Institute and State University; Allison M. Pekkanen, Virginia Polytechnic Institute and State University; Timothy E. Long, Virginia Tech; Christopher B. Williams, Virginia Polytechnic Institute and State University; Michael J. Bortner, Virginia Polytechnic Institute and State University
777c
Influence of Processing on Additively Manufactured Mechanically Adaptive Cellulose Nanocrystal Polymer Composites
Jacob Fallon, Virginia Polytechnic Institute and State University; Michael J. Bortner, Virginia Polytechnic Institute and State University; Earl J. Foster, Virginia Tech; Cara Herwig, Virginia Polytechnic Institute and State University; Ben Kolb, Virginia Polytechnic Institute and State University
777d
3D Printed Shape Memory Objects Based on Olefin Ionomer of Zinc-Neutralized Poly(ethylene-co-methacrylic acid)
Bryan D. Vogt, University of Akron
777e
Three-Dimensional Printing By Multiphase Silicone/Water Capillary Inks
Sangchul Roh, North Carolina State University; Dishit Parekh, North Carolina State University; Bhuvnesh Bharti, Louisiana State University; Simeon Stoyanov, University of Wageningen; Orlin D. Velev, North Carolina State University
777f
3D Printing of Polymer-Bonded Magnets Using a Combination of Extrusion Direct Write and Stereolithography Methods
Alan Shen, University of Connecticut; Anson Ma, University of Connecticut; Sameh Dardona, United Technologies Research Center
777g
PDMS-Based Ink Development for 3D Printing Applications
Kwan-Soo Lee, Los Alamos National Laboratory; Joseph H. Dumont, Los Alamos National Laboratory; Andrew M. Schmalzer, Los Alamos National Laboratory; ChiHoon Park, Gyeongnam National University of Science and Technology; Andrea Labouriau, Los Alamos National Laboratory
777h
3D Printed Active Microfluidic Elements for Portable Bioanalysis Assays
Duanduan Han, Texas A&M University; Victor M. Ugaz, Texas A&M University
777i
3D Printed Polymer-Based Bio-Inspired Neural Systems
Blake Johnson, Virginia Tech
Abstract Submissions Closed
See more of this Group/Topical: Materials Engineering and Sciences Division
<< Previous Session | Next Session >>