378 Particle Breakage and Comminution Processes


Description:
This session solicits papers in all aspects of particle size reduction, breakage and/or fragmentation, either in milling, processing or as a result of transport. Both experimental and computational papers are welcomed, as well as modeling of all types including DEM and population balance approaches.

Sponsor:
Particle Production and Characterization


Chair:
Priscilla J. Hill
Mississippi State University
Dave C. Swalm School of Chemical Engineering
P.O. Box 9595
MS State, MS
39762
Fax Number: 662-325-2482
Email: phill@che.msstate.edu

Co-Chair:
Ecevit Bilgili
Associate Professor
New Jersey Institute of Technology
Otto H. York Department of Chemical, Biological, and Pharmaceutical Engineering
161 Warren St. 150 Tiernan Hall
Newark, NJ
07102
Phone Number: 973-596-2998
Email: bilgece@njit.edu


Papers:
378a
Grindability of Torrefied Wood Pellets
Maryam Manouchehrinejad, University of Georgia; Sudhagar Mani, University of Georgia
378b
Effect of Media Shape on Impact Breakage of a Bed of Silica Sand Particles: An Attainable Region Approach
Nkosikhona Hlabangana, National University of Science and Technology; Nonhlanhla G Mguni, National University of science and technology; Gwiranai Danha, Botswana University of Science and Technology
378c
DEM-PBM Modelling of the Millling Process of Pharmaceutical Ribbons
Chuan-Yu Wu, University of Surrey
378d
Modeling of Particle Breakage and Dispersion in a Slurry Fischer-Tropsch Reactor
Deekshitha Adapa, Amrita School of Engineering, Coimbatore-641112, Amrita Vishwa Vidyapeetham, Amrita University, India; Aruna C.M., Amrita School of Engineering, Coimbatore-641112, Amrita Vishwa Vidyapeetham, Amrita University, India; Udaya Bhaskar Reddy Ragula, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Amrita University, India
378e
Perspectives on Rotor Stator Wet Milling: Scaledown, Scaleup, Operations and Applications
Ivan Lee, Merck & Co., Inc.; Eric Sirota, Merck & Co.
378f
Crystal Wet Milling and Particle Attrition in High Shear Mixers
Kanan Ghaderzadeh, University of Maryland; Richard V. Calabrese, University of Maryland
378g
An Investigation into the Performance of an Industrial-Scale Roll Mill
Karl Jacob, The Dow Chemical Company; James F. Koch, The Dow Chemical Company; Ben Freireich, Particulate Solid Research, Inc.; Madhusudhan Kodam, The Dow Chemical Company
378h
A Novel Multi-Scale Modeling Approach for Simulating the Evolution of Particle Size during Dry Milling
Ecevit Bilgili, New Jersey Institute of Technology; Maxx Capece, New Jersey Institute of Technology; Rajesh Davé, New Jersey Institute of Technology
Abstract Submissions Closed
See more of this Group/Topical: Particle Technology Forum
<< Previous Session | Next Session >>