586 Poster Session: Process Development


Description:
Submissions in the following related areas are being considered:
* Process Research and Innovation
* Pilot Plants
* Technology Transfer and Manufacturing
* Process Intensification and Microprocesses
* Product Design

Sponsor:
Process Development Division
Co-Sponsor(s):
Process Research and Innovation (12A), Pilot Plants (12B), Technology Transfer and Manufacturing (12C), Process Intensification & Microprocess Engineering (12E), Product Design (12G), Poster Sessions (POSTERSESSIONS)


Chair:
Joe Schroer
Process Assessment Engineer
SABIC Americas, Inc.
1600 Industrial Blvd
Sugar Land, TX
77478
Email: jschroer@SABIC.com

Co-Chair:
Liwen Chen
PhD
Lamar University
Dan F. Smith Department of Chemical Engineering
P.O. Box 10053
Beaumont, TX
77705
Email: lchen1@lamar.edu


Papers:
307e
Effect of Non-Ideal Behavior on the Energy Minimum Design of Highly Integrated Reaction and Separation Processes
Laura-Selin Cici, Hamburg University of Technology; Georg Fieg, Hamburg University of Technology; Torben Egger, Hamburg University of Technology
586a
Characterization and Evaluation of Zero-Length Covalent Crosslinking Strategies for DNA Based Applications
Malithi Wickramathilaka, Purdue University
586b
Adsorption Desulfurization Performance of B2O3 Modified Ag-CeOx/TiO2-SiO2 and Adsorption Diffusion Study
Meiqin Zheng, Fuzhou University; Xiaohui Chen, Fuzhou University; Hui Hu, Fuzhou University
586c
Experimental Vapor-Liquid Equilibrium Data for the Ternary Mixture (Methane + Propane + Methylbenzene) at Conditions Relevant to the LNG Scrub Column
Fernando Perez, University of Western Australia; Saif ZS. Al Ghafri, University of Western Australia; Eric F. May, University of Western Australia
586d
Reactive Dividing Wall Column: Experimental and Simulative Studies about Process Control and Dynamic Behaviour
Lisa Egger, Hamburg University of Technology; Georg Fieg, Hamburg University of Technology
586e
A Thermodynamic-Based Modeling and Analysis Approach for Mechanical Energy Recovery
Aida Amini Rankouhi, Wayne State University; Yinlun Huang, Wayne State University
586f
Influence of Transport Properties and Correlations Between Properties in Process Modelin
Pia Herrmann, Friedrich-Alexander-Universität Erlangen-Nürnberg; Kevin Busch, Friedrich-Alexander-Universität Erlangen-Nürnberg; Karsten Müller, Friedrich-Alexander-Universität Erlangen-Nürnberg
586g
Life Cycle Optimization of Topside Process Design for Offshore Platform
Ziehyun Kim, Inha University; Soojin Kwon, Inha University; Yeonju Shin, Inha University; Yeonpyeong Jo, Inha University; Seungwook Cho, Inha University; Sungwon Hwang, Inha University
586h
Accounting for Anisotropy of the Packing to Improve CFD Simulation of Liquid Maldistribution in Structured Packing in an Inclined Column and Validation
Philippe Béard, IFP Energies nouvelles; Manel Fourati, IFP Energies nouvelles; Pascal Alix, IFP Energies nouvelles; Thomas Maubert, TOTAL; Claire Weiss, TOTAL; Xavier Courtial, Prosernat; Gauthier Perdu, Prosernat
Process and Separations Design
Optimization and Control
Abstract Submissions Closed
See more of this Group/Topical: Process Development Division
<< Previous Session | Next Session >>