659 Developments in Biorefineries


Description:
This session will discuss research efforts that enhance the potential commercialization of various conversion processes to produce fuels and chemicals from biomass or any renewable feedstock. Examples include catalyst development that leads to higher yield and selectivity, novel processes to make chemicals, process development, economic feasibility, success stories, scaled production, and biorefinery sizing.

Sponsor:
Sustainable Biorefineries
Co-Sponsor(s):
Biorefinery Technologies for Forest Based Lignocellulosic Biomass (T4A)


Chair:
Eric C. D. Tan
National Renewable Energy Laboratory
National Bioenergy Center
1617 Cole Blvd
Golden, CO
80401
Fax Number: 303-384-6363
Email: eric.tan@nrel.gov

Co-chairs:
Peyman Fasahati
University of Wisconsin Madison
Madison, WI
Phone Number: 5173489909
Email: fasahati@wisc.edu

Kok Siew Ng
University of Surrey

Email: k.ng@surrey.ac.uk


Papers:
659g
A Preview on "Evaluating Indicators and Life Cycle Inventories for Processes in Early Stages of Technical Readiness"
Raymond L. Smith, U.S. Environmental Protection Agency; Eric C. D. Tan, National Renewable Energy Laboratory; Gerardo J. Ruiz-Mercado, U.S. Environmental Protection Agency
659b
Techno-Economic Comparison of an Industrial Scale Pyrolysis of Seaweed for Liquid Fuel Production: H2 Production vs. H2 Purchase Scenarios
Boris Brigljevic, Pukyong National University; J. Jay Liu, Pukyong National University; Hee-Chul Woo, Pukyong National University
659c
Techno-Economic and Life Cycle Analysis for the Production of Renewable Acrylonitrile from Non-Food Biomass
Jadid Samad, Southern Research; William Grieco, Southern Research; Amit Goyal, Southern Research
659d
Relative Sustainability of Natural Gas Assisted High-Octane Gasoline Blendstock Production from Biomass
Eric C. D. Tan, National Renewable Energy Laboratory; Hao Cai, Argonne National Laboratory; Michael Talmadge, National Renewable Energy Laboratory
659e
In situ Catalytic Fast Pyrolysis of Nannochloropsis sp. using Co-Mo Catalysts for Value Added Chemicals
Ribhu Gautam, Indian Institute of Technology Madras; R. Vinu, Indian Institute of Technology Madras, Chennai, India
659f
Wood Adhesive As a Coproduct of Cellulosic Alcohol: Crosslinking and Bond Performance
Islam Hafez, University of Minnesota; Han-Seung Yang, University of Minnesota; Feng Jin Liew, University of Minnesota; Jonathan Schilling, University of Minnesota; William T. Y. Tze, University of Minnesota
Abstract Submissions Closed
See more of this Group/Topical: Sustainable Engineering Forum
<< Previous Session | Next Session >>