356 Polymers in Additive Manufacturing


Description:
This session will focus on the utilization of macromolecular systems in the emerging field of additive manufacturing. In particular, the session will focus on both experimental and computational efforts that utilize polymers in additive manufacturing. Contributions addressing all methods of polymer additive manufacturing, including fused deposition modeling, stereolithography, selective laser sintering, and direct write, are welcome. ***Note to faculty candidates: please include a note to the session chair during submission to alert them to your status***

Sponsor:
3D Printing
Co-Sponsor(s):
Polymers (08A), Next-Gen Manufacturing (T6A)


Chair:
Mingjiang Zhong
Assistant Professor
Yale University
Department of Chemical and Environmental Engineering
New Haven, CT
Phone Number: (203)432-5790
Email: mingjiang.zhong@yale.edu

Co-Chair:
Michael J. Bortner
Assistant Professor
Virginia Polytechnic Institute and State University
Department of Chemical Engineering
Blacksburg, VA
Phone Number: (540) 231-4213
Email: mbortner@vt.edu


Papers:
356a
Tough, High Impact Resistant 3D Printed Objects from Core-Shell Filaments
Bryan D. Vogt, University of Akron; Fang Peng, University of Akron; Miko Cakmak, Purdue University
356b
Solution-Based 3D Printing of Hierarchical Porous Polymers
Fengyi Zhang, Georgia Institute of Technology; Yao Ma, Georgia Institute of Technology; Jianshan Liao, Georgia Institute of Technology; Victor Breedveld, Georgia Institute of Technology; Ryan Lively, Georgia Institute of Technology
356c
3D Printing with Soft Porous Silicones By the Homocomposite Thixotropic Paste (HTP-3DP) Method
Sangchul Roh, North Carolina State University; Orlin D. Velev, North Carolina State University
356d
Additive Manufacturing of Polypropylene/Hydrogenated Resin Blends: Effect on Crystallinity, Morphology and Mechanical Properties
Arit Das, Virginia Polytechnic Institute and State University; Alexandra Marnot, Virginia Polytechnic Institute and State University; Eugene Joseph, Virginia Polytechnic Institute and State University; Michael J. Bortner, Virginia Polytechnic Institute and State University
356e
Filament Extension Atomizer: Novel Aerosol Generation from Polymer Melts and Applications in Additive Manufacturing
Jerome Unidad, PARC, A Xerox Company; Kathryn Murphy, PARC, A Xerox Company; Scott Solberg, PARC, A Xerox Company; David Johnson, PARC, A Xerox Company
356f
3D Printing of Hydrogels with Spontaneous Formation of Solvent-Induced Patterns
Chya-Yan Liaw, New Jersey Institute of Technology; Jorge Pereyra, New Jersey Institute of Technology; Murat Guvendiren, New Jersey Institute of Technology
Abstract Submissions Closed
See more of this Group/Topical: Topical Conference: Next-Gen Manufacturing
<< Previous Session | Next Session >>