186 Interactive Session: Systems and Process Operations


Description:
This session invites poster submissions that present novel results and highlight recent advances in all areas relevant to Systems and Process Operations. Outstanding posters will be considered for Area 10C awards.

Sponsor:
Computers in Operations and Information Processing
Co-Sponsor(s):
Poster Sessions (POSTERSESSIONS)


Chair:
Chrysanthos E. Gounaris
Carnegie Mellon University
Department of Chemical Engineering
Pittsburgh, PA
Email: gounaris@cmu.edu

Co-Chair:
Pieter Schmal
Process Systems Enterprise Inc.
Cedar Knolls, NJ
07927
Email: p.schmal@psenterprise.com


Papers:
186a
Optimization-Based Retrofit of a Cryogenic Air Separation Unit for Flexible Operation
Artur M. Schweidtmann, RWTH Aachen University; Pascal Schäfer, RWTH Aachen University; Adrian Caspari, RWTH Aachen University; Hagen Seele, RWTH Aachen University; Pascal Padberg, RWTH Aachen University; Christoph Offermanns, RWTH Aachen University; Adel Mhamdi, RWTH Aachen University; Alexander Mitsos, RWTH Aachen University
186b
Planuling: A Hybrid Planning and Scheduling Optimization to Schedule Slow and Plan Fast Processes
Jeffrey D. Kelly, Industrial Algorithms; Robert E. Franzoi Jr., University of São Paulo; Brenno C. Menezes, University of São Paulo; Jorge A. W. Gut, University of São Paulo
186c
Gondef: A New Exact Method to Generate All Non-Dominated Points of Multi-Objective Mixed-Integer Linear Programs
Metin Turkay, Koc University; Seyyed Amir Babak Rasmi, Koc University
186d
Data-Driven Robust Optimization with Principal Component Analysis and Kernel Smoothing
Chao Ning, Cornell University; Fengqi You, Cornell University
186e
Validation of CFD Prediction Accuracy of VOC Generation Rate for Cost-Effective Design of VOC Recovery Equipment
Xidong Hu, JGC Corporation; Manabu Kumagami, JGC Corporation; Shaoxiang Qian, JGC Corporation; Nobuhiro Yamada, JGC Corporation; Masahiro Kawasaki, JGC Corporation; Takashi Iitsuka, JGC Corporation; Syuichi Oguro, JGC Corporation
186f
Process Design Quality for the Success of Industrial R&D at SABIC
Zheng Liu, SABIC; Brain Peng, SABIC; Blamurali Nair, SABIC
186g
A Multi-Objective MILP Model for Spatio-Temporal Design and Operation of Multi-Product Oil Palm Value Chains
John Frederick D. Tapia, University of Bath; Sheila Samsatli, University of Bath
186h
Numerical Analysis of Effect of Diaphragm Structure Based on Thermo-Electro-Magneto-Hydrodynamics Coupling Model in Magnesium Electrolysis cell
Cheng-Lin Liu, East China University of Science and Technology; You-Fa Jiang, East China University of Science and Technology; Jin Xue, East China University of Science and Technology; Jian-Guo Yu, East China University of Science and Technology
186i
Integrated Design and Control of Intensified Membrane-Based Hydrogen Production Via Methane Steam Reforming
Alexios S. Kyriakides, Aristotle University of Thessaloniki; Spyros S. Voutetakis, Centre for Research and Technology-Hellas; Simira Papadopoulou, Alexander Technological Educational Institute of Thessaloniki; Panos Seferlis, Aristotle University of Thessaloniki
186j
Scale up Design Optimization of Pressure Swing Adsorption Processes for Gas Separation
Daeho Ko, Daesung Industrial Gases Co., Ltd.
186k
Scale up Design Optimization of a Membrane Module for Gas Separation
Daeho Ko, Daesung Industrial Gases Co., Ltd.
186l
Solving Real-World Natural Gas Gathering Systems
Russell Burnett, Bryan Research & Engineering; Charles C. Solvason, Bryan Research & Engineering; Michael Sellers, Bryan Research & Engineering
186m
On the Temporal Evolution of the Material Stress Profile in a Supercritical Pulverized Coal Boiler Under Load-Following Operation
Katherine Reynolds, West Virginia University; Elijah Hedrick, West Virginia University; Parikshit Sarda, West Virginia University; Emily Tomer, West Virginia University; Benjamin P. Omell, National Energy Technology Laboratory; Stephen E. Zitney, National Energy Technology Laboratory; Debangsu Bhattacharyya, West Virginia University
186n
Optimization of Single-Well CO2 Injection for Enhancement of Tight Oil Production
Guofan Luo, University of Houston; Christine Ehlig-Economides, University of Houston; Michael Nikolaou, University of Houston
186o
A Novel Methodology to Optimize the Operation of Combined Cooling Heat and Power Systems
Sayyed Faridoddin Afzali, McMaster University; Vladimir Mahalec, McMaster University
186p
Simultaneous Crude Procurement Planning and Movement Scheduling for Petroleum Refineries
Honglin Qu, Lamar University; Qiang Xu, Lamar University
186q
Dynamic Production Planning and Scheduling for an Chemical Plant
Min Chen, Lamar University; Qiang Xu, Lamar University; Wang Zhenlei, East China University of Science and Technology
186r
Sustainable Strategic Planning for a National Natural Gas Energy System Accounting for Unconventional Sources
Esbeydi Villicaña-García, Universidad Michoacana de San Nicolás de Hidalgo; José María Ponce-Ortega, Universidad Michoacana de San Nicolás de Hidalgo
186s
A Multi-Objective MILP Model for Planning, Design and Operation of Biomass Supply Chains – Capturing the Trade-Offs within the Food-Energy-Water-Environment Nexus
Sheila Samsatli, University of Bath
186t
Data-Driven Multi-Period Planning Model and Global Optimization for Entire Petroleum and Petrochemical Operations
Wei Khang Ooi, The University of Manchester; Jie Li, The University of Manchester; Xin Xiao, Institute of Process Engineering, Chinese Academy of Sciences; Yong Qiao, PetroChina Company Limited; Baoguo Zhao, Dushanzi Petroleum and Petrochemical Complex, PetroChina; Guangming Du, Dushanzi Petroleum and Petrochemical Complex, PetroChina; Xin Su, Dushanzi Petroleum and Petrochemical Complex, PetroChina; Hongwei Liu, Dushanzi Petroleum and Petrochemical Complex, PetroChina
Abstract Submissions Closed
See more of this Group/Topical: Computing and Systems Technology Division
<< Previous Session | Next Session >>