408 Integrated Process Engineering and Economic Analysis


Description:
Optimizing process manufacturing in an innovation economy is critical both academically and industrially. Companies must design innovative products and operate processes efficiently to compete. Spanning the value creation life cycle is R&D, conceptual design, basic engineering, equipment design, economics, procurement, deployment and continuous improvement in manufacturing. This session is to address the critical issue of integrated process engineering in development, scale-up, and commercialization and manufacturing operation for disruptive technologies.

Sponsor:
Innovations of Green Process Engineering for Sustainable Energy and Environment
Co-Sponsor(s):
Solar Energy for Power Generation and Chemical Processing (T4B), Computing Systems and Technology Division (10), Systems and Process Design (10A), Sustainable Engineering Forum (23), Pilot Plants (12B)


Chair:
Yizu Zhu
SABIC
Sugar Land, TX
77478
Email: yzhu@sabic.com

Co-chairs:
Julie N. Renner
Case Western Reserve University
Chemical and Biomolecular Engineering
Cleveland, OH
06492
Email: jxr484@case.edu

Mike Dou
ExxonMobil Research and Engineering
Spring, TX
Email: mike.s.dou@exxonmobil.com


Papers:
408a
Conceptual Process Design and Economic Analysis of a Diving-Wall Distillation Sequence for Catalyst Reforming Unit
Weixuan Zhu, Dalian University of Technology; Xiong Zou, Dalian University of Technology; Haotian Ye, Dalian University of Technology; Yang Yang, Dalian University of Technology; Hong-guang Dong, Dalian University of Technology
408c
Technology Readiness Levels As a Framework for Techno-Economic Assessment
Georg A. Buchner, TU Berlin; Arno W. Zimmermann, TU Berlin; Annika Marxen, Institute for Advanced Sustainability Studies e.V. (IASS); Kai J. Stepputat, TU Berlin; Arian E. Hohgräve, TU Berlin; Reinhard Schomäcker, TU Berlin
408j
Gas Capture by Ionic liquids
Xiaochun Zhang, Chinese Academy of Sciences; Suojiang Zhang, Institute of Process Engineering, Chinese Academy of Sciences
408d
Thermoeconomic Optimization of Reverse Brayton Cycle Based Cryocooler for HTS Power Transmission Cable
Aman Dhillon, Indian Institute of Technology Kharagpur; Parthasarathi Ghosh, Indian Institute of Technology Kharagpur
408e
Guidelines for Techno-Economic Assessment of Carbon Capture and Utilization Technologies
Arno W. Zimmermann, MIT; Johannes Wunderlich, TU Berlin; Georg A. Buchner, TU Berlin; Annika Marxen, Institute for Advanced Sustainability Studies e.V. (IASS); Katy Armstrong, The University of Sheffield; Stavros Michailos, The University of Sheffield; Henriette Naims, Institute for Advanced Sustainability Studies e.V. (IASS); Peter Styring, The University of Sheffield; Prof. Dr. Reinhard Schomäcker, TU Berlin
408f
Techno-Economic Modeling and Optimization of Catalytic Reactive Distillation for Bio-Oil Upgradation
M. Arif Khan, University of Kentucky; Yusuf G. Adewuyi, North Carolina A&T State University
408g
Superstructure Optimization of Membrane-Based Carbon Capture Systems
Miguel A. Zamarripa, National Energy Technology Laboratory; Samir Budhathoki, AECOM; Olukayode Ajayi, National Energy Technology Laboratory; Janice A. Steckel, National Energy Technology Laboratory; Christopher E. Wilmer, University of Pittsburgh; Michael S. Matuszewski, National Energy Technology Laboratory; David C. Miller, National Energy Technology Laboratory
408k
Making Hydrogen from Water with a Protein Organized Electrode: Ultra-High Utilization of Noble Metal in Proton Exchange Membrane Electrolysis for Capital Cost Reduction
Nuttanit Pramounmat, Case Western Reserve University; Julie N. Renner, Case Western Reserve University
408i
Design Optimization and Economic Evaluation of LNG/NGL Integrated Processes Under Lean Feed Composition
Chunhe Jin, Seoul National University; Youngsub Lim, Seoul National University
Abstract Submissions Closed
See more of this Group/Topical: Topical Conference: Innovations of Green Process Engineering for Sustainable Energy and Environment
<< Previous Session | Next Session >>