435 Additive Manufacturing of Energetics


Description:
Additive manufacturing of energetics has recently been an area of significant interest for the energetic materials community. This session seeks papers describing all facets of AM of energetic materials including formulation, rheology, printing parameters, modeling and combustion or detonation performance. This may include robocasting, ink-jet, FDM, or other AM techniques and processes.

Sponsor:
Energetics
Co-Sponsor(s):
3D Printing (T6C)


Chair:
Lori J. Groven
Assistant Professor
South Dakota School of Mines & Technology
Department of Chemical and Biological Engineering
Rapid City, SD
57701
Email: lori.groven@sdsmt.edu

Co-Chair:
Kyle T. Sullivan
Postdoc
Lawrence Livermore National Laboratory
Chemical Sciences Division
7000 East Ave
Livermore, CA
94551
Email: sullivan34@llnl.gov


Papers:
Introductory Remarks
435a
Solids Metrics for Successful 3D Printing of Energetic Feedstocks
Brandon Ennis, E&G Associates, Inc.; Naseem Jibrin, E&G Associates, Inc.; Benjamin Ennis, E&G Associates, Inc.; Michael Winn, E&G Associates, Inc.; Bryan J. Ennis, E&G Associates, Inc.
435b
3D Printing of Metal-Polymer Composite Structures Via Fused Deposition Modeling
Trevor Fleck, Purdue University; George Chiu, Purdue University; Emre Gunduz, Purdue University; Steven F. Son, Purdue University; Jeffrey Rhoads, Purdue University
435c
Polymer Resin Systems for Precision Direct-Ink-Write Printing of Thermite-Loaded Inks
Brian Howell, Lawrence Livermore National Laboratory; Eric Bukovsky, Lawrence Livermore National Laboratory; Paul Martinez, Lawrence Livermore National Laboratory; Matthew Durban, Lawrence Livermore National Laboratory; Michael Grapes, Lawrence Livermore National Laboratory; Alexandrea Golobic, Lawrence Livermore National Laboratory; Kyle Sullivan, Lawrence Livermore National Laboratory; Alex E. Gash, Lawrence Livermore National Laboratory
Break
435d
3D Printing of Thermite Mixtures Using Static Mixing
Michael Grapes, Lawrence Livermore National Laboratory; Elliot Wainwright, Johns Hopkins University; Matthew Durban, Lawrence Livermore National Laboratory; Kyle Sullivan, Lawrence Livermore National Laboratory; Alex E. Gash, Lawrence Livermore National Laboratory
435e
Additive Manufacturing of Pyrotechnic Ignition Delays
Ian Walters, South Dakota School of Mines and Technology; Lori J. Groven, South Dakota School of Mines & Technology
435f
The Role of Particle Size on the Combustion of Boron Carbide/Sodium Periodate Biocidal Formulations
Lance Kotter, South Dakota School of Mines & Technology; Lori J. Groven, South Dakota School of Mines & Technology
Abstract Submissions Closed
See more of this Group/Topical: Particle Technology Forum
<< Previous Session | Next Session >>