Preliminary Program subject to change
TWA01 In situ particle and flow measurements in concentrated mixtures
OverviewNew developments of instrumentation and its application to concentrated dry and wet mixtures will be featured. Papers will describe innovations in instrumentation using single point, multiple point and tomographic measurement techniques applied to modeling, optimisation and control of particulate systems. These applications may be based on a broad range of industrial sectors but special interest will be given to areas of pharmaceutical production and energy systems. Examples of measurement methods to be considered might include; optical, ultrasound, terahertz, electrical impedance, ionization techniques, electromagnetic induction, particle imaging etc and to include spectroscopic versions of these modalities and new data interpretation methods based on soft sensor approaches. Example of the use of multiple and tomographic sensors to describe velocity and density maps are also especially sought
Primary SponsorParticle and Bulk Powder Characterization (TWa)
Co-Sponsor(s)Particulate Handling/Processing and Granular Systems (TWc)

Chair

Richard Williams
Professor
School of Process, Environmental & Materials Engineering Clarendon Road University of Leeds
Institute of Particle Science & Engineering
University of Leeds
Leeds LS2 9JT,
United Kingdom
Phone Number: (+44) (0)113 343 2789/2801
Fax Number: (+44) (0)113 343 2781
Email: r.a.williams@leeds.ac.uk

CoChair

Stefaan J. R. Simons
Professor of Chemical Engineering
University College London
Department of Chemical Engineering, University College London, Torrington Place
London, WC1E 7JE
UK
Phone Number: 00442076793805
Fax Number: 00442073832348
Email: stefaan.simons@ucl.ac.uk
Electrical Capacitance Tomography – the State of the Art
Tom Dyakowski, Department of Chemical Engineering, UMIST, Manchester, United Kingdom, Haigang Wang, School of Electrical and Electronic Engineering, The University of Manchester, Sackvillle street, PO Box 88, Manchester, United Kingdom, Wuqiang Yang, School of Electrical and Electronic Engineering, The University of Manchester, Sackville street, Manchester M60 1QD, Manchester, United Kingdom and Shi Liu, Institute of Engineering Thermophysics, The Chinese Academy of Sciences, Beijing 100080, PO Box 2706, Beijing, China
Modelling and Detection of Cosmic Ray Muons: the Development of a Muon Imaging System for Large Shielded Storage Vessels
Steven Stanley, H260 Hinton House, Nexia Solutions, Risley, Warrington, WA3 6AS, United Kingdom, Dominic Rhodes, Nexia Solutions, Seascale, Sellafield, Cumbria, CA20 1PG, Paul M. Jenneson, Dept. of Physics, School of Electronics and Physical Sciences, University of Surrey, School of engineering, Guildford, GU2 7XH, United Kingdom, Walter Gilboy, Department of Physics, University of Surrey, School of Physical Sciences and Electronics, Guildford, GU2 7XH, United Kingdom and Stefaan J.R. Simons, Department of Chemical Engineering, University College London, Torrington Place, London, WC1E 7JE, United Kingdom
In-Line Measurement of Nano Particles Using Electroacoustic Spectroscopy Combined with Zeta Potential and Tomographic Techniques for High Concentration Paticle Suspension Systems
L. Liu1, Xue Z. Wang1, R. A. Williams1, R. Tweedie2 and K. Primrose3, (1)Institute of Particle Science and Engineering, University of Leeds, Houldsworth Building, Clarendon Road, Leeds, LS2 9JT, United Kingdom, (2)Malvern Instruments Ltd, Enigma Business Park, Grovewood Road, Malvern, WR14 1XZ, United Kingdom, (3)Industrial Tomography Systems Limited, 47 Newton Street, Great Manchester, Manchester, M1 1FT, United Kingdom
On-Line Measurement of the Settling Behaviour of Concentrated 2-Phase Solid/Liquid Mixtures
Haroun Mahgerefteh and Richard Kamugasha, Chemical Engineering, University College London, Torrington Place, London, WC1E 7JE, England
Three-Dimensional Representations of Powder Mixedness Using a Positron Emission Tracking Technique
Brian Armstrong1, Jonathan P. K. Seville1, Xianfeng Fan2, Andy Ingram1, David J. Parker2, Trevor G. Page3 and Vejay Jekmohan4, (1)Department of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT, United Kingdom, (2)School of Physics and Astronomy, University of Birmingham, Edgbaston, Birmingham, B15 2TT, United Kingdom, (3)Niro Pharma Systems, GEA Process Engineering Ltd, PO Box 15, Eastleigh, SO53 4ZD, United Kingdom, (4)Buck Systems Ltd, GEA Process Engineering Ltd, 257 Wharfdale Road, Tyseley, Birmingham, B11 2DP, United Kingdom
Development of an Integrated Methodology to Evaluate Permeability Based on Measured Microstructures
Cordelia Selomulya, Department of Chemical Engineering, Monash University, Clayton Campus, Wellington Road, Melbourne, Australia, Toan Manh Tran, ARC Centre for Functional Nanomaterials, The University of New South Wales, Sydney, Australia, Xiaodong Jia, School of Process, Environmental and Materials Engineering, University of Leeds, Houldsworth Building, Clarendon Road, Leeds, LS2 9JT, United Kingdom and Richard Williams, School of Process, Environmental & Materials Engineering Clarendon Road University of Leeds, Institute of Particle Science & Engineering, University of Leeds, Leeds LS2 9JT, United Kingdom

Topical W: Fifth World Congress on Particle Technology