Preliminary Program subject to change
TWB01 Gas-Phase Nanoparticle Synthesis - I
OverviewThis session focuses on gas phase routes for fine particle synthesis. Reports on the latest advances on nanoparticle manufacture by aerosol processes such as flame, plasma, or evaporation-condensation are particularly welcome. Integrated processes of gas-phase nanoparticle production, manipulation and deposition, for example film coatings, will also be covered. The effect of synthesis conditions on particle size distribution, chemical and crystal phase composition, purity, structure and shape is the emphasis of this session. Ideally, the connection between synthesis conditions, particle characteristics and their functionality in specific applications (e.g., catalytic, electronic and structural) is to be discussed. Discussion on the potential for scale up of the production process and the challenges involved therein is also sought.
Primary SponsorParticle Design: Formation and Processing (TWb)

Chair

Karsten Wegner
Institute of Process Engineering
Swiss Federal Institute of Technology (ETH)
Sonneggstrasse 3
Zurich, CH-8092
Switzerland
Phone Number: +41 44 632 2489
Fax Number: +41 44 632 1595
Email: wegner@ptl.mavt.ethz.ch

CoChair

Kamal M. Akhtar
Research Center Baltimore
Millennium Chemicals Inc.
6752 Baymeadow Drive
Glen Burie, MD 21060
Phone Number: 001 410 762 1157
Email: kamal.akhtar@millenniumchem.com
Theoretical and Experimental Investigations on Sintering Kinetics of Silica Nanoparticles
Hans-Joachim Schmid, Martin J. Kirchhof, Henning Förster and Wolfgang Peukert, Institute of Particle Technology, Friedrich-Alexander-University Erlangen-Nuremberg, Cauerstr. 4, Erlangen, 91058, Germany
Developing Particle Capabilities for New Applications
George Fotou1, M. Oljaca2 and T. Kodas2, (1)Cabot Superior Micropowders, Cabot Corporation, 5401 Venice Avenue, NE, Albuquerque, NM 87113, (2)Cabot Corporation, 5401 Venice Avenue, NE, Albuquerque, NM 87113
Thermal and Crystalline Stability of Silica-Tungsta/Titania Particles Made by Flame Spray Pyrolysis
Rainer Jossen1, Martin C. Heine2, Kamal M. Akhtar3 and Sotiris E. Pratsinis2, (1)Department of Mechanical and Process Engineering, Swiss Federal Institute of Technology Zurich, Particle Technology Laboratory, Sonneggstrasse 5, Zurich, CH-8092, Switzerland, (2)Particle Technology Laboratory, Swiss Federal Institution of Technology Zurich, Sonneggstrasse 5 NO H 19, Zurich, 8092, Switzerland, (3)Research Center Baltimore, Millennium Chemicals Inc., 6752 Baymeadow Drive, Glen Burie, MD 21060
Design of a Laser Assisted Aerosol Reactor for Production of Ceramics on Semi-Industrial Scale
Jan W.M. van Erven, Tomek. M. Trzeciak, Zhao Fu and J.C.M. Marijnissen, Delft University of Technology, Julianalaan 136, 2628 BL, Delft, Netherlands
Gas-Phase Nanoparticle Production, Handling and Separation by Aerodynamic Effects in Supersonic Expansion
Paolo Piseri1, Karsten Wegner2, Gero Bongiorno1, Simone Vinati3 and Paolo Milani1, (1)CIMAINA and Dipartimento di Fisica, Università di Milano, Via Celoria 16, I-20133 Milano, Italy, (2)Tethis S.r.l., Piazzetta Bossi, 4, I-20121 Milano, Italy, (3)Tethis Labs, Tethis S.r.l., Piazzetta Bossi, 4, I-20121 Milano, Italy
Nano-Structured Silica Produced by Evaporation-Induced Self Assembly of Aerosols
Raghuraman Pitchumani, Physical Chemistry and Molecular Thermodynamics and Nanostructured Materials, Department of Chemical Technology, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, Netherlands, Marc-Olivier Coppens, Physical Chemistry and Molecular Thermodynamics, Department of Chemical Technology, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, Netherlands and Andreas Schmidt-Ott, Nanostructured Materials, Department of Chemical Technology, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, Netherlands

Topical W: Fifth World Congress on Particle Technology