Preliminary Program subject to change
TWB05 Functional Nanoparticles and Nanocoatings on Particles
OverviewPapers on novel applications and/or synthesis routes of nanoparticles and their coatings are sought. Although the emphasis is on nanoparticles (<100 nm), studies on larger particle systems are also welcome. Special emphasis will be paid to in-situ functionalization of nanoparticles tailoring their properties to achieve high performance in the final application. Nanocoatings with inorganic and organic materials on particles will be highlighted which enhance for example catalytic activity, optical performance, band structure, dispersion in matrices etc. Authors are encouraged to present the connection between synthesis conditions, chemical and crystal composition, structure and the functionality in specific applications.
Primary SponsorParticle Design: Formation and Processing (TWb)

Chair

Lutz Maedler
Chemical Engineering
UCLA
405 Hilgard Avenue
5531-G Boelter Hall
Los Angeles,, CA 90095
Phone Number: 310-500-8736
Fax Number: 310-206-4107
Email: lutz@seas.ucla.edu

CoChair

Changzai Chi
Research Scientist
DuPont
Wilmington, DE Not Availabl
Phone Number: Not Available
Email: Changzai.Chi@usa.dupont.com
Carbon-embedded or -supported Pt Nanoparticles Made in Flames
Frank O. Ernst, Robert Buechel, Reto Strobel and Sotiris E. Pratsinis, Particle Technology Laboratory, ETH Zürich, Sonneggstrasse 3, ML2 F13, Zürich, 8092, Switzerland
Plasma Coating of Submicron Particles and the Fabrication of Core-Shell Nanostructures for Low-K Elecgtronics
Themis Matsoukas and Dongsheng Li, Chemical Engineering, Penn State, 150 Fenske Laboratory, University Park, PA 16802
Individual Nanocoating of Ceramic Nanoparticles Via Atomic Layer Deposition
Luis F. Hakim, University of Colorado at Boulder, 1111 Engineering Drive ECCH 111 UCB 424, Boulder, CO 80309, Steven M. George, Chemistry and Biochemistry, University of Colorado at Boulder, Ekeley W145B, Boulder, CO 80309 and Alan W. Weimer, Department of Chemical and Biological Engineering, University of Colorado, 1111 Engineering Drive, Boulder, CO 80309-0424
Flame Made Fe-Doped Tio2 as Visible-Light Activated Photocatalyst
Wey Yang Teoh, School of Chemical Engineering and Industrial Chemistry, ARC Centre for Functional Nanomaterials, University of New South Wales, Sydney, 2052, Australia, Rose Amal, ARC Centre for Functional Nanomaterials, University of New South Wales, Sydney, 2052, Australia, Lutz Madler, Chemical Engineering, UCLA, 405 Hilgard Avenue, 5531-G Boelter Hall, Los Angeles,, CA 90095 and Sotiris Pratsinis, Swiss Federal Institute of Technology (ETH Zurich), Department of Mechanical & Process Engineering, Sonneggstrasse 3, ML F26, Zurich, CH-8092, Switzerland
Tailoring the Properties of Micro-Particles for Industrial Applications Using Dry Powder Coating
Karl-Ernst Wirth, Institute of Particle Technology, Friedrich-Alexander University Erlangen-Nuremberg, Cauerstr. 4, Erlangen, 91058, Germany and Markus Linsenbuehler, GCT/P L549, BASF AG, Ludwigshafen, 67056, Germany
Investigation of Chemical Hydrophobisation Treatment of Solid Particles Surfaces in Organic Phase and Fluidized Bed
Myriam LAZGHAB1, Khashayar Saleh2 and Pierre Guigon2, (1)Génie chimique Technologie des poudres et suspensions, Université de technologie de Compiègne, Centre de recherche de Royallieu, Rue Personne de Roberval, Compiègne, 60200, France, (2)Génie Chimique TPS, Université de Technologie de Compiègne, Centre de recherche de Royallieu, Rue Personne de Roberval, Compiègne, 60200, France

Topical W: Fifth World Congress on Particle Technology