Interpretation of Breakage Data via Moment Models
R. Bertrum Diemer Jr., DuPont Engineering Research & Technology, DuPont Company, 1007 Market Street, Brandywine Building 8454, Wilmington, DE 19898, Douglas E. Spahr, DuPont Engineering Research & Technology, DuPont Company, Experimental Station 304/A209, Wilmington, DE 19898, Rahul V. Magan, Washington University, One Brookings Drive, CB1198, Saint Louis, MO 63130, Jon H. Olson, Chemical Engineering, University of Delaware, Colburn Laboratory, Newark, DE 19716 and Samuel J. Litster, School of Engineering, The University of Queensland, St Lucia, 4060, Australia |
Modelling and Measurement of Granule Friability
Pavol Rajniak1, Neil MacPhail2, Shaun Fitzpatrick2 and Csaba Sinka2, (1)Research Laboratories, Merck & Co., Inc., WP78-110, PO Box 4, West Point, PA 19486-0004, (2)Merck Sharp & Dohme Ltd, Hertford Road, Hoddesdon, Hertfordshire, United Kingdom |
Analysis of Single Ball Mill by Distinct Element Method
Chih Chi Kwan, Institute of Particle Science and Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom, Hiroshi Mio, KFPT Core Research Center, Keihanna Interaction Plaza Inc., 1-7, Hikaridai, Seika-cho, Soraku-gun, Kyoto-fu, 619-0237, Japan, Yulong Ding, Institute of Particle Science & Engineering, University of Leeds, Clarendon Road, Leeds, LS2 9JT, United Kingdom and Mojtaba Ghadiri, Institute of Particle Science and Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom |
Dem Prediction of Particle Flows and Breakage in Comminution Processes
Paul Cleary, CSIRO Mathematical and Information Sciences, CSIRO, Australia, Clayton VIC, Australia, M. Sinnott, CSIRO, Australia, Clayton VIC, Australia and R.D. Morrison, JKMRC, the University of Queensland, Brisbane, Australia |
Prediction of Optimum Milling Condition and Power Consumption
Junya Kano, Yuichiro Suzuta and Fumio Saito, IMRAM, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai, Japan |
Breakage of Needle Shaped Crystals under Compaction
Zdenek Grof, Martin Kohout and Frantisek Stepanek, Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom |
|