Laboratory Experiments in Particle Technology
Balakrishnan Pitchumani, Department of Chemical Engineering, Indian Institute of Technology, Hauz Khas P.O., New Delhi, 110016, India |
New Measurement of Particle Size Distribution by Bouyancy Weighing Method
Eiji Obata, Yuichi Ohira and Mitsuhiro Ohta, Department of Applied Chemistry, Muroran Institute of Technology, 27-1, Mizumoto-cho, Muroran, 050-8585, Japan |
Rheological Properties of a Suspension of Disintegrated Yeast Cells
MAREK SOLECKI1, ANDRZEJ HEIM1, PIOTR OWCZARZ2, CHRISTINE FRANCES3, MARIE-LINE DÉLIA3 and GEMMA KILBEY3, (1)Department of Process Equipment, Technical University of Lodz, ul. Wolczanska 213, Lodz, 93-005, Poland, (2)Department of Chemical Equipment, Technical University of Lodz, ul. Wolczanska 213, Lodz, 93-005, Poland, (3)Laboratoire de Génie Chimique UMR CNRS 5503 - ENSIACET, 5 rue Paulin Talabot |
New methods for obtaining geometrical properties of individual particles and aggregates of particles
Michael A. Taylor, Granite Rock Company, 7275 Bayview Way, Sacramento, CA 95831-3217 |
Characterization of Nanosize Silica Particle Surface Designed on a Molecular Level
Chika Takai, Masayoshi Fuji and Minoru Takahashi, Nagoya Institute od Technology Ceramics Research Labratory, Tajimi, 507-0071, Japan |
Particle Size Distribution of Water Treatment Plant Residuals
Swamy C. Basim, Engineering Technology, Central Connecticut State University, 1615 Stanley Street, New Britain, CT 06050 and Dorairaja Raghu, Civil and Environmental Engineering, New Jersey institute of Technology, University Heights, Newark, NJ 07102 |
Study in Binarization Method of Particle Micro-Image
Yuzeng Wang Sr., School of Mechanical engineering, Jinan University, Jiwei road ,No.106, Jinan,Shandong Province, Jinan, 250022, China and Yingni Gu, School of Mechanical engineering, Jinan University, Jiwei Road ,No.106, Jinan,Shandong Province, Jinan, 250022, China |
Discussion on Clastic Rock Grain Size Distribution Characterization
xu xiqing Sr.1, feng zihui2, zhang zuoxiang2, zhang weiqin2, wang shuyun2 and zhao junwen2, (1)Exploration & Development Research Institute, Daqing Oilfield Company Ltd., PetroChina, Ranghulu District,Daqing City,Heilongjiang Prov.,P.R.China, 163712, China, (2)Exploration & Development Research Institute, Daqing Oilfield Company Ltd., PetroChina, Ranghulu District,Daqing City,Heilongjiang Prov.,P.R.China, daqing city, 163712, China |
Characterization of Tio2 Coated Particles Prepared by Sol-Gel Method
Hiromasa Okada1, Tomoko Yoshikawa2, Junichi Ida1, Tatsushi Matsuyama1 and Hideo Yamamoto1, (1)Department of Environmental Engineering for Symbiosis, Soka University, 1-236 Tangi-cho, Hachioji, Tokyo, Japan, (2)KASUGA DENKI,INC, 2-4-19 Minami-Kamata, Ohta-ku, Tokyo, 144-0035, Japan |
Characterization of Silane-Modified Nano-Zro2 Particles
AI Desheng, Inst. of Nuclear and New Energy, Tsinghua University, Haidian District, Beijing, China |
The Use of Focused Ion Beams for the Characterization of Industrial Mineral Microparticles -
Stephen Mee1, Jarrod Hart2, Maneesh Singh3, Neil Rowson4, Richard Greenwood4, Geoff Allen5, Peter Heard5 and Dave Skuse3, (1)Centre for Formulation Engineering, University of Birmingham, Edgbaston, B15 2TT , United Kingdom, (2)Central Research & Development, IMERYS Minerals Ltd, Par Moor Centre, Par Moor Road, Cornwall, PL24 2SQ, United Kingdom, (3)IMERYS Minerals Ltd, Par Moor Centre, Par Moor Road, Cornwall, PL24 2SQ, United Kingdom, (4)University of Birmingham, Edgbaston, B15 2TT , United Kingdom, (5)Interface Analysis Centre, University of Bristol, 121 St. Michael’s Hill, Bristol, BS2 8BS, United Kingdom |
Flame Synthesis of Moo3 Particles
Beat A. Buesser, Murray J. Height and Sotiris E. Pratsinis, Particle Technology Laboratory, ETH Zurich, Department of Mechanical & Process Engineering, Sonneggstrasse 5, Zurich, CH-8092, Switzerland |
The Analysis of Fracture Surfaces of Bi-Layer Tablets of Microcrystalline Cellulose (MCC) Using Laser Profilometry
Sharon J. Inman, Chemical Enginerring and Chemical Technology, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom, Brian J. Briscoe, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom and Kendal G. Pitt, Merck Sharp & Dhome Limited, Hertford Road, Hertfordshire, Hoddesdon, EN11 9BU, United Kingdom |
Application of the Theory of Markov Chains to Model Non-Linear Phenomena in Comminution
Vadim Mizonov, Applied Mathematics, ISPEU Ivanovo, Rabfakovskaya, 34, Ivanovo, 153 003, Russia, Henri Berthiaux, Chemical Engineering Department of Particulate Solids (LGPSD), Ecole des Mines Albi - Carmaux, Campus Jarlard, route de Teillet, ALBI, 81 000, France and Vladimir Zhukov, applied mathematics, ISPEU Ivanovo, Rabfakovskaya, 34, Ivanovo, 153 003, Russia |
Colloidal Crystals of Polystyrene with High Surface Charge in Dilute Aqueous Suspension
RENXIAO LIU1, LI CAO2, PENG DONG1 and SHENGLI CHEN1, (1)DEPARTMENT OF CHEMICAL SCIENCE AND ENGINEERING, STATE KEY LABORATORY OF HEAVY OIL PROCESSING,CHINA PETROLEUM UNIVERSITY,BEIJING, No.18, FUXUE ROAD,CHANGPING, BEIJING, China, (2)SCHOOL OF BUSINESS ADMINISTRATION, CHINA PETROLEUM UNIVERSITY,BEIJING, No.18, FUXUE ROAD,CHANGPING, BEIJING, China |
Synthesis of Magnesium Hydroxide and Oxide Nanoparticles Using a High-Gravity Technique
Clifford Y. Tai, Ming-Hui Chang, Chia-Te Tai and Hsiao-Ping Hsu, Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei, Taiwan |
Analysis of Dehydration Process in Crystallization of Nacl by Molecular Dynamics Simulations
Kazunori Kadota, Atsuko Shimosaka, Yoshiyuki Shirakawa and Jusuke Hidaka, Chemical Engineering and Materials Science, Doshisha University, 1-3, Miyakodani, Tatara, Kyotanabe, Kyoto, Japan |
A Granulation Process for Producing Spherical Particles of a Rubber Antioxidant in a Water Cooling Tower
Xin Li, Ting-Jie Wang and Yong Jin, Department of Chemical Engineering, Tsinghua University, Beijing, China |
Self-Assembly of Biopolymer Gel Networks within Hydrating Particles
Paulomi (Polly) Ramesh Sukha, Centre for Nutrition and Food Science, The University of Queensland, Brisbane 4072, Australia, Bhesh Bhandari, School of Land and Food Sciences, The University of Queensland, Brisbane 4072, Australia, Tony Howes, School of Engineering, The University of Queensland, Brisbane 4072, Australia and Mike Gidley, Centre for Nutrition and Food Sciences, The University of Queensland, Brisbane 4072, Australia |
Functional materials enabled by nanoparticles from laser-driven synthesis process
Shiv Chiruvolu, NanoGram Corporation, 2911 Zanker Road, San Jose, CA 95134 and Meijia Ng, Department of Chemical and Biomolecular Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore, 119260, Singapore |
The effect of wetting conditions on wet drum granulation kinetics
Tadeusz Gluba, Department of Process Equipment, Technical University of Lodz, Stefanowskiego 12/16, Lodz, 90-924, Poland |
Production of Micron- and Submicron-Size Hollow Polymeric Particles
Uzi Mann1, Stanislav Emets2, Vikram Shabde2 and Karlene A. Hoo3, (1)Chemical Engineering, Texas Tech University, MS 3121, Lubbock, TX 79409, (2)Texas Tech University, MS 3121, Lubbock, TX 79409, (3)Texas Tech University, P.O. Box 43121, Lubbock, TX 79409 |
A Study of the Effect of Ultrasound on Baso4 Heterogeneous Nucleation during Reactive Crystallization
Zhichao Guo, Chemical Engineering Department, University College London, Torrington Place, London, WC1E 7JE, United Kingdom and A.G Jones, University College London, Torrington Place, London, WC1E 7JE, United Kingdom |
Physico-Chemical Limitations during the Electrokinetic Treatment of a Polluted Soil
Aurora Fernandez1, Petra Hlavackova2, Véronique Pomès1 and Michel Sardin3, (1)Chemical Engineering Department of Particulate Solids (LGPSD), Ecole des Mines d'Albi-Carmaux, Campus Jarlard Route de Teillet, Albi, France, (2)Chemical Engineeering Department of Particulate Solids, Ecole des Mines d'Albi-Carmaux, Campus Jarlard - Route de Teillet, Albi, France, (3)Laboratoire des Sciences de Génie Chimique (LSGC), Institut National Polythecnique de Lorraine (INPL), 1, rue Grandville, Nancy, France |
Milling of Organic Solids
Yulong Ding, Institute of Particle Science & Engineering, University of Leeds, Clarendon Road, Leeds, LS2 9JT, United Kingdom, Chih Chi Kwan, Institute of Particle Science and Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom, Mojtaba Ghadiri, Institute of Particle Science and Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom and R. Bertrum Diemer Jr., DuPont Engineering Research & Technology, DuPont Company, 1007 Market Street, Brandywine Building 8454, Wilmington, DE 19898 |
Change in the properties of beds granulated in disk granulators
Andrzej Heim, Department of Process Equipment, Technical University of Lodz, Stefanowskiego 12/16, Lodz, 90-924, Poland, Robert Kazmierczak, Dept.of Process Equipment, Technical University of Lodz, Stefanowskiego 12/16, Lodz, 90-924, Poland and Andrzej Obraniak, Dept. of Process Equipment, Technical University of Lodz, Stefanowskiego 12/16, Lodz, 90-924, Poland |
Study of the Preparation of Ultrafine High Aspect Ratio Wollastonite Powders
Liu Xinhai Sr., Department of Non-metacllic Minerals, Zhenzhou Institute of Multipurpose Utilization of Mineral Resources. CAGS, 328, Longhai West Road, Zhengzhou, P.R.C, Zhenzhou, 450006, China |
Probing of the Microstructural Evolution of Nano-Powder Compacts Using High Resolution X-Ray Microtomography
Ugur Tuzun, School of Engineering, School Director of Research, University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom, Ozcan Gundogdu, University of Surrey, School of engineering, Guildford, Surrey GU2 7XH, UK, Paul M. Jenneson, Dept. of Physics, School of Electronics and Physical Sciences, University of Surrey, School of engineering, Guildford, Surrey GU2 7XH, UK and Edward J. Morton, Dept. of Physics, School of Electronics and Physical Sciences, CXR Ltd., Unit 5, Riverside Business Park,, Walnut Tree close, Guildford, Surrey GU1 4UG, United Kingdom |
The electrostatics enhancing particle filtration begins to be used in powder station and waste incineration to clean the flue gas. The humidity of flue gas plays an important role in this technology. It changes the ability of particle charging and the str
Bin Huang, Department of Thermal Engineering, Tsinghua University, Beijing, 100084, China |
Evolution of Primary Particle Size Distributions during Coagulation
Isaak Tsalicoglou, Martin C. Heine and Sotiris E. Pratsinis, ETH Zurich, Department of Mechanical & Process Engineering, Sonneggstrasse 5, Zurich, CH-8092, Switzerland |
Precision Emulsification of Droplets and Capsules
Ruozhou Hou1, Nita Aryanti1, Richard Williams1 and Goran Vladisavljevic2, (1)School of Process, Environmental & Materials Engineering Clarendon Road University of Leeds, Institute of Particle Science & Engineering, University of Leeds, Leeds LS2 9JT, United Kingdom, (2)Institute of Feed Technolgy and Biochemistry, University of Belgrade, Belgrade-Zemun, Serbia and Montenegro |
Shape and size of polymorphic L-Glutamate crystals by batch cooling crystallisation
Kumar patchigolla, Derek Wilkinson and Mingzhong Li, Department of chemical engineering, Heriot-Watt University, Edinburgh, United Kingdom |
Effects of Binders in Particle Agglomeration
Tom R. Marrero, University of Missouri-Columbia, 1313 Fieldcrest, Columbia, MO 65203 |
Synthesis of Nanosize Hollow Silica Particle and Its Applications
Masayoshi Fuji, Chika Takai and Minoru Takahashi, Ceramics Research Laboratory, Nagoya Institute of Technology, 10-6-29 Asahigaoka, Tajimi, Gifu507-0071, Japan |
Experimental investigation and mathematical modelling of evolution of the axial non homogeneity of mixtures in static mixers
Dennis Ponomarev1, Vadim Mizonov1, Cendrine Gatumel2 and Henri Berthiaux2, (1)Applied Mathematics, ISPEU Ivanovo, Rabfakovskaya, 34, Ivanovo, 153 003, Russia, (2)Chemical Engineering Department of Particulate Solids (LGPSD), Ecole des Mines Albi - Carmaux, Campus Jarlard, route de Teillet, ALBI, 81 000, France |
Unique Applications of Fluidization for High-Volume Foundry Sand Processing
James L. Lewis Jr., Coastal River Technologies, LLC, 508 Briarwood Drive, Calabash, NC 28467 and Ian French, Consolidated Engineering Co., 1971 McCollum Parkway, Kennesaw, GA 30144 |
Synthesis of Indium-Tin Oxide Nanoparticles by Flame Spray Pyrolysis
Hankwon Chang1, Hee Dong Jang1, Yong Jae Suh1 and Kikuo Okuyama2, (1)Nano-Materials Group, Korea Institute of Geoscience & Mineral Resources (KIGAM), 30 Gajeong-dong, Yuseong-gu, Daejeon, South Korea, (2)Hiroshima University, 1-4-1, Kagamiyama, Higashi-Hiroshima, 739-8527, Japan |
Generation of Monosized Dispersion of Structured Particles by Laminar Jet Break-up of a Compound Jet
Yinghe He, School of Engineering, James Cook University, Townsville, Australia |
Incidence of the mixture composition in stability angles of granular materials in cement production
Ana M. Vidales1, Irene Ippolito2, Oscar A. Benegas3, Fernando Aguirre3, Oscar C. Nocera3 and Mario R. Baudino3, (1)Department of Physics, Universidad Nacional de San Luis and CONICET, Chacabuco 917, San Luis, 5700, Argentina, (2)Department of Physics, Grupo de Medios Porosos y CONICET, Colon 850, Buenos Aires, 1063, Argentina, (3)Department of Mines, Universidad Nacional de San Luis, Chacabuco 917, San Luis, 5700, Argentina |
Preparation of Titania Nanoparticles and Its Photocatalytic Properties
Hee Dong Jang1, Hankwon Chang1, Ho Sung Yoon2 and Soon Joong Kim1, (1)Nano-Materials Group, Korea Institute of Geoscience & Mineral Resources (KIGAM), 30 Gajeong-dong, Yuseong-gu, Daejeon, South Korea, (2)Metal Recovery Group, Korea Institute of Geoscience & Mineral Resources (KIGAM), 30 Gajeong-dong, Yuseong-gu, Daejeon, South Korea |
Production of a Diluted Solid Tracer by Dry Co-Grinding in a Tumbling Ball Mill
Nadine LE BOLAY, Celine ZAPATA-MASSOT, Laurie BARTHE and Zakarya AHMED, Laboratoire de Genie chimique - ENSIACET, 5 rue Paulin Talabot, B.P. 1301, Toulouse cedex 01, 31106, France |
Direct deposition of airborne V2O5/TiO2 on ceramic foams for phthalic anhydride catalysis
Björn Schimmöller1, Heiko Schulz1, Sotiris E. Pratsinis2, Anika Bareiss3, Andreas Reitzmann3 and Bettina Kraushaar-Czarnetzki3, (1)Particle Technology Laboratory, ETH Zürich, Sonneggstr. 3, Zurich, CH-8092, Switzerland, (2)Particle Technology Laboratory, ETH Zürich, Sonneggstrasse 3, ML2 F13, Zürich, 8092, Switzerland, (3)Institute of Chemical Process Engineering, University of Karlsruhe, Kaiserstrasse 12, Karlsruhe, Germany |
Size Limit of Zinc Nanoparticles
Shulin Wang1, Shengjuan Li1, Yanchen Du2, Bo Xu1, Laiqiang Li1 and Yan Zhu1, (1)Power Engineering, University of Shangahi for Science and Technology, 516 Jungong Road, Shanghai, China, (2)medical apparatus, University of Shangahi for Science and Technology, 516 Jungong Road, Shanghai, China |
A Direct, Simple and One-step Synthesis for Tetra methyl ammonium tetra chloro (pyridine)-(triphenylphosphine)-flouro rheniumate (IV)
Babak Sadeghi Garmaroudi1, Shahriar Ghammami2, Ali Reza Farrokhi3 and Ali Reza Mahjoub*3, (1)Chemistry, I.A.U of Tonekabon, P.O.BOX :46815/337-Tonekabon-Mazandaran, Tonekabon, Iran, (2)IIKU, Qazvin, Iran, (3)TMU, Iran |
Monitoring the Effects of the Roller Compaction Process Variables on Ribbon Properties Using Non-Destructive near-Infrared Reflectance Spectroscopy
Feng Wang, Rodolfo Pinal, Kenneth R. Morris, Garnet E. Peck and M. Teresa Carvajal, Department of Industrial and Physical Pharmacy, School of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, IN 47907 |
Coating Metals on the Cenosphere by Magnetron Sputtering Method
Zheng Xu, Xiaozheng Yu and Zhigang Shen, Beijing Key Lab. For Powder Technology R.&D, Beijing University of Aeronautics and Astronautics, Beijing, 100083, People’s Republic of China, 30 xueyuan road Beijing China, Beijing, 100083, China |
Modeling and Experimental Analysis of Superheated Steam Granulation
Robert Hampel1, Stefan Heinrich2, Lothar Mörl2 and Mirko Peglow3, (1)Institut of Process Equipment and Environmental Technology, Otto-von-Guericke University Magdeburg, Universitätsplatz 2, Magdeburg, Germany, (2)Institute of Process Equipment and Environmental Technology, Otto-von-Guericke University Magdeburg, Universitätsplatz 2, Magdeburg, Germany, (3)Institute of Process Engineering, Otto-von-Guericke University Magdeburg, Universitätsplatz 2, Magdeburg, Germany |
Adhesion Strength of Freshly Deposited and Annealed Nanoparticles Layers
Antonio Tricoli, Particle Technology Laboratory, ETH Zürich, Sonneggstrasse 3, ML2 F13, Zürich, 8092, Switzerland and Sotiris E. Pratsinis, PTL, ETH Zürich, Sonneggstrasse 3, ML2 F13, Zürich, 8092, Switzerland |
Crystallization and Agglomeration for Coating of Energetic Materials
|
A Finite Element Study of the Time Dependent 3-D Axisymmetric Sessile Droplet Evaporation Dynamics: the Fluid Flow Application for Particles Deposition
Ervina Widjaja and Michael T. Harris, School of Chemical Engineering, Purdue University, 480 Stadium Mall Drive, West Lafayette, IN 47907 |
Crystallization and Agglomeration for Coating of Energetic Materials
KWANG JOO KIM, Chemical Engineering, Hanbat National University, Daejeon 305-719, Korea, KEE-KAHB KOO, Chemical and Biomolecular Engineering, SOGANG UNIVERSITY, Seoul 121-742, 121-742, Korea and HYOUN SOO Kim, Agency of Defense Development, P.O.BOX 107, Daejeon 305-719, South Korea |
Production and Characterization of High Aspect Ratio Metal Flakes
Rhye Hamey1, Kevin Powers2, M. B. Arun Ranade3 and Hassan El-Shall1, (1)Materials Science, PERC University of Florida, 205 Particle Science and technology, Gainesville, FL 32605, (2)PERC University of Florida, 205 Particle Science and technology, Gainesville, FL 32605, (3)Particle Technologies, LLC, 14554 Lee Road, Chantilly, VA 20151-1632 |
Synthesis of Au/Tio2 Core-Shell Nanoparticles by Sol-Gel Method
Yeon-tae Yu, Division of Advanced Materials Science & Engineering, Chonbuk National University, 1-664-14 Duckjin-dong, Duckjin-gu, Jeonju, 561-756, South Korea, Hyun Woo Kwon, Division of Advanced Materials Engineering, College of Engineering, Chonbuk National Univ, 1-664-14 Duckjin-dong, Duckjin-gu, Jeonju, 561-756, South Korea, Jeong Mo Yoon, Division of Advanced Materials Engineering, College of Engineering, Chonbuk National Univ.,, 1-664-14 Duckjin-dong, Duckjin-gu, Jeonju, 561-756, South Korea and Yunfa Chen, Institute of Processing Engineering, Chinese Academy of Sciences, Zhongguancun, Beijing, 100080, China |
Discrete particle simulation of granular flows in silos
Satish C. Negi and Jan C. Jofriet, School of Engineering, University of Guelph, Guelph, ON N1G 2W1, Canada |
Compaction of Pharmaceutical Powders
Severine Toson, Chemical Engineering, Imperial College London, Room 438, BONE Building, South Kensington Campus, London, SW7 2AZ, United Kingdom, Brian Briscoe, Chemical Engineering and Chemical Technology, Imperial College - London, South Kensington Campus, London, SW7 2AZ, United Kingdom and Kendal G. Pitt, Merck Sharp & Dhome Limited, Hertford Road, Hertfordshire, Hoddesdon, EN11 9BU, United Kingdom |
Scaling-up of Ceramic Body Grinding with Reference to Grinding Rate
Tomasz P. Olejnik and Andrzej Heim, Faculty of Process and Environmental Engineering, Technical University of Lodz, Wolczanska 213, Lodz, Poland |
Impact of Solid Flow on a Granular Bed
S.M. Wu1, H.P. Zhu1, A.B. Yu1 and P. Zulli2, (1)School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052, Australia, (2)BlueScope Steel Research Laboratories, BlueScope Steel Limited, Port Kembla, NSW 2505, Australia |
Computer Modeling of a Packed Fibrous Bed
T. J. Donohue, Centre for Bulk Solids and Particulate Technologies, University of Newcastle, Callaghan, Australia and Christopher Wensrich, School of Engineering / Centre For Bulk Solids and Particulate Technologies, University of Newcastle, Callaghan, Australia |
A New Approach for Modeling the Normal Contact within Granular Assemblies through the Discrete Element Method
Harald Kruggel-Emden, E. Simsek, S. Wirtz and V. Scherer, Department of Energy Plant Technology, Ruhr-Universitaet Bochum, Universitaetsstraße 150, IB 3/133, Bochum, 44780, Germany |
Numerical modelling of the hydrodynamics of a gas-solid two-phase mixture flowing through a packed bed
Yulong Ding, Institute of Particle Science & Engineering, University of Leeds, Clarendon Road, Leeds, LS2 9JT, United Kingdom |
Absolute assessment of adsorption-based characterisation methods
Mark Biggs and Alex Buts, Institute for Materials and Processes, Kenneth Denbigh Building, King's Buildings, Mayfield Road, Edinburgh, EH9 3JL, United Kingdom |
Gadolinium-Containing Lipid Nanoparticles for Neutron Capture Therapy
Chika Nabeta, Hideki Ichikawa, Yousuke Noguchi and Yoshinobu Fukumori, Faculty of Pharmaceutical Sciences and Cooperative Research Center of Life Science, Kobe Gakuin University, Arise 518, Ikawadani-cho, Nishi-ku, Kobe 651-2180, Japan |
A 2D DEM study of Geldart group A particle bed fluidization behaviour
David K. Kafui, Fang Yang, Colin Thornton and Jonathan P.K. Seville, School of Engineering, The University of Birmingham, Edgbaston B15 2TT, Birmingham, United Kingdom |
A study on G/D optimization of a centrifugal mill by the particle size of product
Hoon Lee, Heechan Cho and Jaeho Lee, School of Civil, Urban and Geosystem Engineering, Seoul National University, San 56-1, Shinrim-dong, Kwanak-ku, Seoul, South Korea |
Floating Solid Dispersion in an Agitated Vessel:The Effect of Impeller Location
Nenad Kuzmanic, Marija Akrap and Edita Mitrovic-Kessler, Department of Chemical Engineering, University of Split, Faculty of Chemical Technology, Teslina 10/V, Split, 21000, Croatia |
Control of Electrostatic Discharge by Using Feedback Control Type Ionizer for Powder Handling Process
Tomofumi Mogami, Development Division, KASUGA DENKI,INC., 2-16-18 Higashi-Kamata Ohta-ku, Tokyo, 144-0035, Japan, Teruo Suzuki, Sales Engineering Section, KASUGA DENKI,INC., 2-4-19 Minami-Kamata, Ohta-ku, Tokyo, 144-0035, Japan, Kwang-Seok Choi, Physical Engineering Safety Reserch Group, Independent Administrative Institution, National Institute of Industrial Safety, 1-4-6 Umezono Kiyose, Tokyo, Japan, Tsutomu Kodama, Independent Administrative Institution, National Institute of Industrial Safety, 1-4-6 Umezono Kiyose, Tokyo, Japan and Satoru Watano, Osaka Prefecture University, Department of Chemical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Sakai, Osaka 599-8531, Japan |
Influence of Glass Transition on the Adhesion of Skim Milk Powder to a Stainless Steel Surface
Mark Hodnett, Nixon Zumaeta and John J. Fitzpatrick, Process & Chemical Engineering, University College Cork, Cork, Ireland |
Convective and Diffusive Motions of Granular Materials in a Vibrated Bed
Li Shin Lu Sr., Department of Mechanical Engineering, Northern Taiwan Institute of Science and Technology, No. 2, Xueyuan Rd., Peitou, 112 Taipei, Taiwan, Taipei, Taiwan and S. Hsiau, Department of Mechanical Engineering, National Central University, No. 300, Jung-da Road, Chung-Li, 32054, Taiwan |
Mechanochemical Waste Processing Based on Grinding
Fumio Saito1, Qiwu Zhang1, Junya Kano2 and Tsuyoshi Inoue3, (1)IMRAM, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai, 980-8577, Japan, (2)IMRAM, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai, Japan, (3)Research Center, Sekisui Chemical Industries Co.Ltd., Minami-ku, Kyoto, Japan |
Polystyrene Coating of Fe3o4 Particles Using Dispersion Polymerization
Liang Guo, Guang-Ling Pei, Ting-Jie Wang, Zhan-Wen Wang and Yong Jin, Department of Chemical Engineering, Tsinghua University, Beijing, China |
Agitation and Mixing in Vibrated Beds
Kenneth J. Ford, Merck & Co., Inc., PO Box4, West Point, PA 19486, James F. Gilchrist, Lehigh University, Department of Chemical Engineering, Bethlehem, PA 18015 and Hugo S. Caram, Lehigh University, 111 Research Drive, Mountaintop Campus, Room B-323, Bethlehem, PA 18015 |
Thermodynamic Analysis of Core-Annular Flow in a Cfb
Ronald W. Breault, Gasification and Combustion Projects Division, National Energy Technology Laboratory, 3610 Collins Ferry Rd, Morgantown, WV 26507 |
Pressure drop characteristics of flat type fabric filters
Masashi Wada, Civil engineering, Ishikawa National College of Technology, Kitacyujo, Tubata,Kahoku-gun, Ishikawa, Japan, Yao Yuping, BASE, Tokyo University of Agriculture and Technology, 2-24-16,Nakacho,Koganei, Tokyo, 184-8588, Japan, Ning Mao, Graduate School of Natural Science and Technology, Kanazawa University, Kakuma-machi,Kanazawa, Ishikawa, 920-1192, Japan and Chikao Kanaoka, Ishikawa National College of Technology, Kitacyujo, Tubata,Kahoku-gun, Ishikawa, Japan |
Estimation of the Hindered Settling Velocity of a Particle in Polydisperse Suspensions
Daisuke Nishiura, Atsuko Shimosaka, Yoshiyuki Shirakawa and Jusuke Hidaka, Department of Chemical Engineering and Materials Science, Faculty of Engineering, Doshisha University, kyotanabe, kyoto, 610-0321, Japan |
A Model to Predict Radial Solids Concentration and Liquid Velocity Distributions in Liquid-Solid Circulating Fluidized Beds
Palani Natarajan1, R. Velraj2 and R.V. Seeniraj2, (1)Mechanical Engineering, Priyadarshini Engineering College, Anna Univeristy, Vaniyambadi,, Chennai 635 751, Tamil Nadu, India, (2)Mechanical Engineering, Anna University, Sardar Patel Road, Guindy, Chennai 600 025 |
A Novel Multi-Dimensional Population Balance Model Incorporating Particle Size Enlargement and Drying Behavior for Fluidized Bed Spray Granulation
Mirko Peglow1, Jitendra Kumar2, Stefan Heinrich3, Evangelos Tsotsas1, Gerald Warnecke2 and Lothar Mörl3, (1)Institute for Process Engineering, University of Magdeburg, Universitätsplatz 2, Magdeburg, 39106, Germany, (2)Institute for Analysis and Numerics, University of Magdeburg, Universitätsplatz 2, Magdeburg, 39106, Germany, (3)Institute of Process Equipment and Environmental Technology, University of Magdeburg, Universitätsplatz 2, Magdeburg, 39106, Germany |
Experimental Study of Electrostatic Separation of Different Component Particles in Mixture Using a Rotating Conical Vessel
Kenichi Yamamoto, Hiroko Ogura, Yumi Honda and Masunori Sugimoto, Department of Material Systems Engineering and Life Science, University of Toyama, 3190 Gofuku, Toyama, Japan |
Fluidization Characteristics, Solids Distributions and Gas Mixing of a Carbon Nanotube Agglomerate Fluidized Bed
Hao Yu, Qunfeng Zhang, Guangsheng Gu, Yao Wang, Guohua Luo and Fei Wei, Beijing Key Lab of Green Chemical Reaction Engineering and Technology, China, Beijing, China |
Preparation and Characterization of Ceramic Porous Filter Using Pottery Raw Materials
Shufeng Ye1, Zhenjiang Wu1, Yunfa Chen1, Tingyu Zhu1 and Yeon-tae Yu2, (1)Institute of Processing Engineering, Chinese Academy of Sciences, Zhongguancun, Beijing, 100080, China, (2)Division of Advanced Materials Science & Engineering, Chonbuk National University, Jeonju, 561-756, South Korea |
Dem Simulation of Fluidized Bed by Similarity Model (Similarity Conditions from Non-Dimensional Equations)
Kimiaki Washino1, Chih-Hung Hsu2, Toshihiro Kawaguchi1 and Yutaka Tsuji1, (1)Mechanical Engineering, Osaka University, 2-1, Yamadaoka, Suita, Osaka, Japan, (2)Institute of Information Science, Academia Sinica, 128 Sec. 2, Academia Rd., Nankang, Taipei, Taiwan |
Effects of Secondary Gas Injection on a Bubbling Fluidized Bed
Dana O. Christensen, DelftChemTech / Faculty of Applied Sciences, Delft University of Technology, Julianalaan 136, 2628 BL, Delft, Netherlands, John Nijenhuis, DelftChemTech, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, The Netherlands, J. Ruud Van Ommen, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, The Netherlands and Marc-Olivier Coppens, DelftChemTech, Faculty of Applied Sciences, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, Netherlands |
Guide to Handling Rotary Airlock Leakage in Pneumatic Conveying Systems
Jonathan O. Thorn, Tech Group, MAC Equipment, Inc, 7901 NW 107th Terr, Kansas City, MO 64153 |
Fluidization Characteristics of Fine Cohesive Powders in a Vibro-Fluidized Bed
Yoshihide Mawatari1, Yuji Tatemoto2, Masato Yamamura1, Hiroyuki Kage1 and Katsuji Noda2, (1)Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Japan, (2)Materials Science and Chemical Engineering, Shizuoka University, 3-5-1 johoku, Hamamatsu, Japan |
Numerical and Experimental Investigation of a Countercurrent Staged Fluidized Bed
Hsiu-Po Kuo, Chung-Yu Cheng and Hua-Zhong Zhang, Department of Chemical and Materials Engineering, Chang Gung University, 259 Wen-Hua 1st Road, Kwei-Shan, Tao-Yuan, 333, Taiwan |
Studies on Ionic Mass Transfer with Co-Axially Placed String of Spheres as the Turbulence Promoters in Homogeneous Flow
Sujatha V1, Avinash Bhupathi2, Immanuel Raju Chaduvula Asha2, Sarveswara Rao Sangita2 and Rajendra Prasad P2, (1)Chemical Engineering Department, Andhra University, Andhra University, Visakhapatnam, 530 003, India, (2)Chemical Engg, Andhra University, Andhra University, Visakhapatnam, 530 003, India |
Tailoring Particle Mixtures for Fluidized Bed Reactors Using High-Throughput Experimentation
J. Ruud Van Ommen, Delft University of Technology, Julianalaan 136, Delft, 2628 BL, The Netherlands and John Nijenhuis, Delft University of Technology, Julianalaan 136, Delft, 2628 BL |
Particle Strength in Fluidised Bed Granulation
|
Effect of Gas Viscosity on the Agglomerate Particulate Fluidization State of Fine and Ultrafine Particles
|
Particle Separation & Classification Using Superfluid Helium (He II)*
Steven W. Van Sciver1, Sylvie Fuzier1 and Neal Kalechofsky2, (1)National High Magnetic Field Laboratory, Florida State University, 1800 E. Paul Dirac Drive, Tallahassee, FL 32310, (2)Oxford Instruments America, 130a Baker Ave Extension, Concord, MA 01742, American Samoa |
Simultaneous Carbon, Nitrogen and Phosphorous Removal from Municipal Wasewater in a Circulating Fluidized Bed Bioreactor
Ajay Patel1, Jesse Zhu2, George Nakhla1 and Nabin Chowdhury1, (1)The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada, (2)Chemical & Biochemical Engineering, The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada |
Design of Washable Bag Houses for Fines Collection in Milk Powder Plants
John Gabites1, John Abrahamson1 and James Winchester2, (1)Chemical and Process Engineering, University of Canterbury, Cnr Creyke and Forestry Rds, Private Bag 4800, Christchurch, New Zealand, (2)Heat Transfer and Drying Team, Clandeboye Site, Fonterra Co-operative Group Limited, Cnr Rolleston & Canal Rds, PO Box 33, Temuka, New Zealand |
Research on the Sorption of Cadmium(II) Ion on Calcareous Phosphorite
|
Application of the theory of Markov chains to model mixing of granular materials
Henri Berthiaux1, Vadim Mizonov2, Cendrine Gatumel3 and Elena Barantseva2, (1)Chemical Engineering of Particulate Solids (LGPSD) - UMR CNRS 2392, Ecole des Mines Albi - Carmaux, Campus Jarlard, route de Teillet, Albi, 81 000, France, (2)Applied Mathematics, ISPEU Ivanovo, Rabfakovskaya, 34, Ivanovo, 153 003, Russia, (3)Ecole des Mines d'Albi, Campus Jarlard,, 81013 Albi,, Albi, France |
Investigation on Dry-Mixing of Sub-Micron Sized B and Bacro4 Particles
Ryan Barrow, New Jersey Institute of Technology, Newark, NJ 07102, Dongguang Wei, New Jersey Center for Engineered Particulates, New Jersey Institute of Technology, Newark, NJ 07102, Jun Yang, Department of Mechanical Engineering, New Jersey Institute of Technology, Newark, NJ 07102, Rajesh Dave, New Jersey Institute of Technology, Mechanical Engineering Department, YCEES 208, 138 Warren Street, Newark, NJ 07102 and Robert Pfeffer, Department of Chemical Engineering, New Jersey Institute of Technology, Newark, NJ 07102 |
Inter-Layer Distance Optimisation for a Light-Based Flowmeter by Means of Computational Fluid Dynamics
Ajit Godbole1, Buyung Kosasih1 and Anton Fuchs2, (1)Faculty of Engineering, University of Wollongong, Northfields Avenue, Wollongong, Australia, (2)Institute of Electrical Measurement and Measurement Signal Processing, Graz University of Technology, Kopernikusgasse 24, Graz, 8010, Austria |
Computer Simulation of Microstructure Evolution in Spray-Dried Particles
Anthony O. Osunde, Department of Chemical Enginering, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom and Frantisek Stepanek, Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, United Kingdom |
Basic Investigations on Fugitive Dust Emissions Caused by Free Falling Bulk Solids
Gert Rheina-Wolbeck and Wilhelm Höflinger, Institute of Chemical Engineering, Research Area Mechanical Process Engineering and Air Pollution Control, Technical University Vienna, Getreidemarkt 9/166-1, Vienna, 1060, Austria |
Coating of Ultra-Fine Particles Using Supercritical Fluids
Yueyang Shen, Mechanical Engineering Department, New Jersey Institute of Technology, Newark, NJ 07102, Abhijit Gokhale, Mechanical Engineering, New Jersey Institute of Technology, University Heights, Newark, NJ 07102, Dongguang Wei, New Jersey Center for Engineered Particulates, New Jersey Institute of Technology, Newark, NJ 07102, Rajesh Dave, New Jersey Institute of Technology, Mechanical Engineering Department, YCEES 208, 138 Warren Street, Newark, NJ 07102 and Robert Pfeffer, Chemical Engineering Department, New Jersey Institute of Technology, Newark, NJ 07102 |
Study on the Diffraction Model of Flaky Grain
zhongjing Ren, Jinan winner instrument co.,ltd., jinan, China, yuntao Ji, Institute of Geology, China Earthquake Administration, the Graduate University of China Academy of Science,Yuquan Road 19# jia, 1#827 Postcode:100049, Dewai Qijiahuozi Postcode:100029, beijing, China, Jinping Yao, Jinan University, Particle measurement institute, jinan, China and yunpu Zhao, Harbin Dongqing metal powder company, Harbin, China |
Ignitability of Spraying Liquid due to Electrostatic Spark
Kwang-Seok Choi, M YAMAGUMA and A OHSAWA, Physical Engineering Safety Reserch Group, Independent Administrative Institution, National Institute of Industrial Safety, 1-4-6 Umezono Kiyose, Tokyo, Japan |
Improved Dissolution Properties of a Poorly Water-Soluble Drug by the Nanosuspension Spray-Coating System
Yousuke Noguchi, Hideki Ichikawa and Yoshinobu Fukumori, Faculty of Pharmaceutical Sciences and Cooperative Research Center of Life Science, Kobe Gakuin University, Arise 518, Ikawadani-cho, Nishi-ku, Kobe, 651-2180, Japan |
Digital Particle Image Velocimetry as a New Technique in Flow Measurements
Irena Sielamowicz Sr., Civil Engineering Department, Technical University Bialystok, Wiejska 45 E, Bialystok, 15-351, Poland and Tomasz A. Kowalewski, Mechanics and Physics of Fluids, Institute of Fundamental Technological Research, Swietokrzyska 21, Warsaw, 00-049, Poland |
Zeta Potential of Submicron Particles in Liquid Media
Renliang Xu, Malvern Instruments Ltd, Shanghai, China |
The Effects of Impurities on Crystal Morphology Formation: an Experimental and Molecular Modelling Investigation
Yusuke Asakuma1, Qin Li2, Ming Ang2, Kouji Maeda1 and Keisuke Fukui1, (1)School of Mechanical and Systems Engineering, University of Hyogo, 2167, Shosha, Himeji, Japan, (2)Department of Chemical Engineering, Curtin University of Technology, Perth, Australia |
Numerical Calculation of Van Der Waals Adhesion Force Distributions of Non-Spherical Particles
Bastian Bach, Jost-Peter Sonnenberg and Eberhard Schmidt, Safety Technology / Environmental Protection, University of Wuppertal, Rainer-Gruenter-Str. Geb. FF, Wuppertal, 42119, Germany |
Micro-Level Validation of Discrete Element Simulations with Experiments: a Focus on Force Propagation
Maya D. Muthuswamy and Antoinette Tordesillas, Department of Mathematics and Statistics, The University of Melbourne, Parkville, 3010, Melbourne, Australia |
Measuring Slurry Quality and Stability of Pyrogenic Silica Suspensions Using Photon Correlation Techniques
Uwe Kätzel1, Michael Stintz1, Herbert Barthel2 and Torsten Gottschalk-Gaudig2, (1)Institute of Process Engineering and Environmental Technology, TU Dresden, Dresden, 01062, Germany, (2)Wacker-Chemie GmbH, Johannes-Hess-Str. 24, Burghausen, 84480, Germany |
A Novel Approach to Describing the Flow Related Aspects of Bulk Solids
Eddie McGee, Ajax Equipment Limited, Mule Street, Bolton, United Kingdom |
Pressure Distribution under Simulated Three Dimensional Granular Piles of Monosized Particles
John-Paul Battye, Bao H Xu and Mojtaba Ghadiri, IPSE, Leeds University, LEEDS, United Kingdom |
An Investigation of Flow, Compactibility, Sticking Tendency and Content Uniformity of Direct Compression Formulations
Dina Zhang1, Sarah Geers1, Martha Ellison1, Zhen Liu2, Feng Li3, James Ney2, Galen Shi4 and Sami Karaborni2, (1)Pharmaceutical Research & Development, Merck Research Laboratory, 126 E. Lincoln Blvd., Merck & Co. Inc., Rahway, NJ 07065, (2)Pharmaceutical Research & Development, Merck Research Laboratory, Merck & Co. Inc., West Point, PA 19486, (3)Pharmaceutical Development, Merck Research Laboratory, Merck & Co. Inc., West Point, PA 19486, (4)Pharmaceutical Science R@D, Eli Lilly @ Co., Indianapolis, IN 46225 |
Visualization of Polymorphic Crystallization in Working Reactor Using in-Process Diffraction Tomography
Xiaojun Lai1, Kevin J. Roberts1, Richard A. Williams1, Paul Barnes2, Simon S. D. M. Jacques2 and Katie Pile2, (1)Institute of Particle Science and Engineering, Faculty of Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom, (2)Department of Crystallography, Birkbeck College,, Malet Street, London, WC1E 7HX, United Kingdom |
Numerical Simulations of Sedimentation Behaviour of Microparticles in Suspensions
Chane-Yuan Yang1, Yulong Ding2, Dave York3 and Walter Broeckx3, (1)Institute of Particle Science and Engineering, University of Leeds, Leeds, United Kingdom, (2)IPSE, University of Leeds, Leeds, United Kingdom, (3)Technical Centres, Procter and Gamble Company, Newcastle, United Kingdom |
Experimental and Computational Assessment of Particulate Drag Models
Paul R. Tortora1, Timothy J. O'Hern1, Ken A. Williams2 and Dale M. Snider2, (1)Engineering Sciences, Sandia National Laboratories, 1515 Eubank SE, MS0834, Albuquerque, NM 87123, (2)Arena-flow, LLC, 10899 Montgomery Blvd Suite B, Albuquerque, NM 87111 |
Simulation of Solid Particles Behaviour in a Driven Cavity Flow
Pawel Kosinski, Anna Kosinska and Alex Christian Hoffmann, Department of Physics and Technology, The University in Bergen, Allegaten 55, 5007, Bergen, Norway |
Prediction of Vdw Force Interaction between Particles with Surface Roughness
Yu Pu1, Chales Cooney1 and Christine Oritz2, (1)Department of Chemical Engineering, Massachusetts Institute of Technology, Room 56-454, 77 Massachusetts Avenue,, Cambridge, MA 02139, (2)Department of Material Sciences, Massachusetts Institute of Technology, Room 56-454, 77 Massachusetts Avenue,, Cambridge, MA 02139 |
Nanocomposite Materials for Hydrogen Storage
Douglas K. Ludlow and Yangchuan Xing, University of Missouri-Rolla, 143 Schrenk Hall, Rolla, MO 65401-1230 |
Titanium Dioxide–Carbon Nanostructure Composites for Enhanced Photocatalysis
Vijay Krishna1, Jue Zhao2, Georgios Pyrgiotakis3, Wolfgang Sigmund3, Ben Koopman4 and Brij Moudgil3, (1)Particles Engineering Research Center/ Materials Science and Engineering, University of Florida, 205, Particle Science & Technology Bldg, P.O. Box 116135, University of Florida, Gainesville, FL 32611, (2)Particle Engineering Research Center/ Environmental Engineering Sciences, University of Florida, 205, Particle Science & Technology Bldg, P.O. Box 116135, University of Florida, Gainesville, FL 32611, (3)Particle Engineering Research Center/ Materials Science and Engineering, University of Florida, 205, Particle Science & Technology Bldg, P.O. Box 116135, University of Florida, Gainesville, FL 32611, (4)Particle Engineering Research Center/ Environmental Engineering Sciences, University of Florida, 205, Particle Science & Technology Bldg, P.O. Box 116135, University of Florida, Gainesville, FL 32611 |
Large Scale Simulation of 2-D Direct Shear by Using Openmp and Mpi
Haoyin Shan and Lin Luo, State Key Lab of Hydraulics, Sichuan University, 24 1ST S SEC, YIHUAN RD, Chengdu, China |
The Effect of Humidity on Granule Strength
Robert Sochon1, Ian Gabbott2, Michael J. Hounslow2 and Agba Salman2, (1)University of Sheffield, Mappin Street, Sheffield, S1 3JD, UK, (2)University of Sheffield, Mappin Street, Sheffield, S1 3JD |
Powder Technology: Interaction between Theoretical, Practical Teaching and Sensory Analysis
Nouria Fatah, Equipe de Génie Chimique du Laboratoire de Catalyse de Lille, ENSC Lille, bat. C7,, 59655 Villeneuve d’Ascq cedex, France |
Numerical Simulation of Dust Lifting behind Shock Waves in a Three-Dimensional Computational Domain
Catalin G. Ilea, Institute of Physics and Technology, University of Bergen, Allégaten 55, N-5007, Bergen, Norway, Pawel Kosinski, Department of Physics and Technology, The University in Bergen, Allegaten 55, 5007, Bergen, Norway and Alex C. Hoffmann, Institute of Physics and Technology, University of Bergen, Allegaten 55, 5007, Bergen, Norway |
Drag Correlation for Motion of Drops on Fibers
George G. Chase1, Saru Dawar2 and H Li2, (1)Chemical Engineering, university of akron, department of chemical engineering,Whitby Hall, Akron, OH 44325, (2)university of akron, department of chemical engineering,Whitby Hall, Akron, OH 44325 |
Hydroxylapatite Particles for Plasma Sprayed Medical Coatings
Chantal Damia, Technology Institute, Paul Sabatier University, Gearges Pompidou Avenue, CASTRES 81104, France and Patrick Sharrock, IUT Castres - Département de Chimie, Université Paul Sabatier, Avenue G. Pompidou, B.P. 258, 81104 Castres, France |
Improvement of the Flowability of Cohesive Bulk Solids with Surface Active Agents: Modelling and Influence of the Relative Humidity
Matthias Schumann1, Detlef Hohne2, Silke Thummler3 and Klaus Husemann3, (1)Saint-Gobain High Performance Materials, CREE, 550 Avenue Alphonse JAUFFRET BP 224, 84306 CAVAILLON, France, (2)Institut für Mechanische Verfahrenstechnik und Aufbereitungstechnik, TU Bergakademie, Freiberg, Germany, (3)TU Bergakademie, Freiberg, Germany |
Development and Uncertainty Evaluation of an Accurate Method for Counting Liquidborne Particles for Establishment of Particle Number Concentration Standards
Takayuki Sakaguchi and Kensei Ehara, National Metrology Institute of Japan, The National Institute of Advanced Industrial Science and Technology, Umezono1-1-1 Central3, Tsukuba-city Ibaraki, Japan |
New Accurate and Multiple-product Classifiers of a High-throughput Centrifugal Classification by Almost Rigidly Rotating Flow
Yoichi Tsuchida, Engineering Physics, Electronics and Mechanics, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan, Koichi Nakabayashi, Mechanical Systems Engineering, Aichi University of Technology, Manori 50-2, Nishihazama-cho, Gamagori, 443-0047, Japan and Takayuki Suzuki, Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan |
A Mathematical Model for the Vacuum Extraction of Hydrocarbons from Soil
Ashok V. Naimpally1, H.Michel Sajadi2, Birgit Jorgensen2, Esther Chiu2, Michael Dumalski2 and Daniel Garcia2, (1)Chemical Engineering, California State University, Long Beach, 1250 Bellflower Blvd, Long Beach, CA 90703, (2)California State University, Long Beach, 1250 Bellflower Blvd, Long Beach, CA 90703 |
- Nanoparticle Sizing – Advances through New Technology
Paul Freud, Research and Development, Microtrac Inc., 148 Keystone Dr.,, Montgomeryville, PA 18936 and Michael Trainer, Microtrac Inc., 148 Keystone Dr.,, Montgomeryville, PA 18936 |
Harmonic Analysis of Mass-Flow Bunkers and Silos with Reference to Thermal Power Plants
Sriram Venkatesh, Dept. of Mechanical Engineering, Osmania University, University College of Engineering, Hyderabad, India |
Finite Element Simulations of the Impact of Elastic Particles with Liquid Films on Solid Surfaces
David C.Y. Wong, Peter J. Fryer, J.P.K Seville and Michael J. Adams, Department of Chemical Engineering, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, United Kingdom |
Liquid Flame Spray Made Titania and Titania-Silver Nanoparticle Deposits Functionality as Photocatalyst for Organic- and Biofilm Removal
H. Keskinen1, Jyrki M. Mäkelä2, Mikko Aromaa2, Sami Areva3, Cilâine Teixeira3, Jarl B. Rosenholm3, Viljami Pore4, Mikko Ritala4, Markku Leskelä4, Mari Raulio5, Mirja Salkinoja-Salonen5, Erkki Levänen6, Tapio Mäntylä6 and Jorma Keskinen2, (1)Institute of Physics, Tampere University of Technology, PO Box 692, FIN-33101, Tampere, Finland, (2)Aerosol Physics Laboratory, Tampere University of Technology, PO Box 692, FIN-33101, Tampere, Finland, (3)Department of Physical Chemistry, Åbo Akademi University, Porthansgatan 3-5, FIN-20500, Turku, Finland, (4)Laboratory of Inorganic Chemistry, University of Helsinki, PO Box 55, Helsinki, Finland, (5)Department of Applied Chemistry and Microbiology, University of Helsinki, PO Box 56, Helsinki, Finland, (6)Institute of Material Sciences, Tampere University of Technology, PO Box 589, Tampere, Finland |
The Utilization of Nanofluids to Remove Microparticles from Surfaces
James Bowers, IPSE, University of Leeds, Houldsworth Building, Clarendon Road, Leeds, LS29JT, United Kingdom and Y Ding, University of Leeds, Houldsworth Building, Clarendon Road, Leeds, LS29JT, United Kingdom |
Formulation of Large Hollow Nanoparticles Aggregates as Potential Carriers of Inhaled Drug Nanoparticles
Kunn Hadinoto Ong and Ponpan Phanapavudhikul, Institute of Chemical and Engineering Sciences (ICES), 1 Pesek Road, Jurong Island, Singapore, Singapore |
|