Application of Turbulent Taylor-Couette Flow to Study the Shear Strength of Biological Aggregates
Ramin Farnood, Dept of Chemical Engng and Applied Chemistry, University of Toronto, 200 College Street, Toronto, ON M5S 3E5, Canada and Yuan Yuan, Chemical Engineering, University of Toronto, 200 College Street, Toronto, ON M5S 3E5, Canada |
Model for Assessing Sensitivity of Biologics to Fluid Forces during Formulation and Filling
David J. Geer1, Albert Keung2, Kenneth J. Ford1, Li Shi1, Suhas D. Shelukar1, WIlliam A. Hunke1 and Scott D. Reynolds1, (1)Merck Research Laboratories, Merck and Co., Inc., West Point, PA 19486, (2)Chemical Engineering, Stanford University |
High Selectivity Microporous Silica Membranes for Lactic Acid Dehydration
Mikel C. Duke1, Agnes Lim2, Joe Carlos Diniz da Costa1 and Lars Kard Nielsen3, (1)ARC Centre for Functional Nanomaterials, Division of Chemical Engineering, The University of Queensland, St Lucia, Australia, (2)School of Life Sciences and Chemical Technology, Ngee Ann Polytechnic, Singapore, Singapore, (3)Bioengineering, Division of Chemical Engineering, The University of Queensland, St Lucia, Australia |
Building Structural Model for Biological Aggregate
Ching-Ping Chu, Sinotech Engineering Consultants, Environmental Engineering Research Center, 3F, 248, An-Kang Road, Nei-Hu, Taipei, Taiwan and D. J. Lee, Department of Chemical Engineering, National Taiwan University, No.1, Sec. 4, Roosevelt Road, Taipei, 10617, Taiwan |
Investigating the Effect of Pipe Diameter Contraction on the Breakage of Whey Protein Aggregates Using Cfd
Nixon Zumaeta1, Edmond P. Byrne2 and John J. Fitzpatrick2, (1)Process&Chemical Engineering, National University of Ireland, Department of Process and Chemical Engineering, UCC, Cork, Ireland, (2)Process & Chemical Engineering, National University of Ireland, Department of Process and Chemical Engineering, UCC, Cork, Ireland |
|